- Home
- Companies
- E-Z Weld Group LLC
- Products
- Model ENVIRO 202 - PVC Solvent Cement
Model ENVIRO 202 -PVC Solvent Cement
E-Z Weld’s ENVIRO is a regular bodied, fast - set PVC Solvent Cement. This cement is recommended for irrigation application for both the irrigation professional and the do-it-yourselfers. It is formulated to give maximum performance at an economical cost. It is also recommended for use on thin walled small diameter pipe. When used correctly, this product will make consistently leak proof joint. Clear, Regular body, PVC Cements, 32°F to 110°F, SCH 40: Up to 4"
ASTM has developed the following schedule and may be used as a guide (for relative humidity 60% or less. Sch. 40 size pipe.) eg. a 2” pipe size joint made at 55°F, 50% Relative Humidity and a test pressure of 100 psi would require a cure time of 4 hrs.
Usage Temperature
32°F to 110°F
Storage Temperature
45°F to 110°F
Shelf Life
3 Years (unopend can)
Ensure adequate ventilation to avoid vapor build up which may cause flash fire. Vapor build up may also cause dizziness, headaches or eye watering. If symptoms are experienced use respiratory protection (NOISH/MSHA TC 23 c or equivalent) or leave are and provide more fresh air. Avoid contact with eyes, skin and clothing by use of safety glasses and gloves. Professionals should consult ASTM Standard F 402-93 Safe Handling of Solvent Cements, Primers and Cleaners Used for Joining Thermoplastic Pipe and Fittings. Professional users should also read the Material Safety Data Sheet for the product.
Eyes
Flush eyes thoroughly with water for 15 minutes. Get immediate medical attention.
Inhalation
If breathing is difficult vacate to fresh air. If breathing problems persist seek immediate medical attention.
Internal
If swallowed give 1 or 2 glasses of water immediately, call physician, hospital or poison control immediately. DO NOT INDUCE VOMITING.
Every batch of cement is carefully checked and monitored to assure consistently high quality standards. Records of every batch are kept. All ingredients are purchased from approved suppliers. This cement has passed the following test (performed in accordance with ASTM Std. D2564
Hydrostatic Burst
400PSI after2hour cure time at 73° F
500 psi (3.45 Mpa) after 16 hour cure time at 73°F (23°C)
Lap Shear
250 psi (2.76 Mpa) after 2 hour cure time at 73°F (23°C)
500 psi (3.45 Mpa) after 16 hour cure time at 73°F (23°C)
900 psi (6.20 Mpa) after 72 hour cure time at 73°F (23°C)