Raci OMERO - Model 6102 & 6103 -Rigid Type Hydrants
According to the requirements of EN 14384 type A and EN 1074-6. Generously oversized column for high water capacity. Plug fully rubber vulcanised with special O-ring profile for lateral soft sealing without high compression of any rubber. Hydrant head, column and base high quality epoxy powder coated (fusion bonded), UV resistant. Multiple O-ring spindle sealing system embedded in non-corrosive material to DIN 3547-1.
- Stainless steel spindle (single forged round bar with rolled threading).
- Gliding disc on the spindle neck to reduce friction when operating the spindle.
- Sealing seat from stainless steel cylinder replaceable deeply corrosion and lamination resistant.
- Automatic drainage system at closed position of the plug.
- Routable flange at hydrant inlet for easy positioning.
- Marking according to EN 19.
- Outlet couplings (hose connections) and operating caps according to various standards possible, according to the following combinations 2 x 2’ 1/2”; 2 x 2 1/2” + 1 x 4”
- Possibility for mounting customized indicator plate (name, logo, etc.).
- Suitable complete with 90° duckfoot bend.
- CE CPR305/2011
- Available protection helmet (MOD. 6200 pag. 6.5) realized in ABS resin, designed to cover the hydrant complete with outlets and covers.
Head, column, basement and flanged connection:
Ductile iron EN-GJS-400-15 / EN 1563 (former to DIN GGG40)
Spindle:
Stainless steel 1.4021/EN ISO 10088 (equivalent to UNI X20Cr13 or AISI420)
Plug:
Ductile iron EN-GJS-400-15 / EN 1563 fully EPDM rubber vulcanised, potable water approved
Bush and pipe nut:
Brass CuZn40Pb2
Operating pipe:
Steel C40 galvanized (on request stainless steel 1.4301 / EN ISO10088 - AISI304)
Friction disc:
POM resin
O-Rings and gaskets:
EPDM rubber, potable water approved
Operating cap, nipples and plugs:
Aluminium (brass on request)
Chains:
Stainless steel 1.4301/EN ISO 10088 (AISI304)
Bolts/nuts/washers:
Stainless steel A2-70 / EN ISO 3506