- Home
- Companies
- Elephant Shield Pvt Ltd
- Products
- Single Compound – Multi Surface ...
Single Compound – Multi Surface Solution
Elephant Shield is a multi-use, multi-surface, multi-area, multi-application solution. This makes it a truly genius protection compound.
Application on any surface without primer is one of many unique features of "Elephant Shield's - Liquid Rubber ®" that leverage the end user to think
beyond limit of architectural challenges while choosing waterproofing and corrosion protection solution.
In addition, Elephant Shield’s - Liquid Rubber® is TOP COAT COMPATIBLE with any water-based paint to meet aesthetic requirements. Limitless Applications of Elephant Shield's - Liquid Rubber® for
- Performing all over the world since 2001
- Water-based, Cold-applied
- Odorless, V.O.C Free, Follows all Green Product Regulations
- Stretch ability of over 950% with 95% Recovery
- Highest UV Stable, Will Not Deteriorate with Weather Cycle and Direct Sunlight
- Compatible with 200+ Inorganic Chemicals, Widely used for chemical storage in industries
- 1000 hrs. Salt Fog Corrosion Passed, Can perform under sea water also.
- Abrasion Resistant, Highly Impact Resistant
- High Puncture Resistant and Self-healing If Punctured
- Comfortable With Standing Water
- Single Component Liquid Coating
- Cold Applied by Brush, Squeegee or Spray Equipment
- Curing in Ambient Condition
- Forms Seamless Rubberized Membrane When Cured
- Applied Indoors and Outdoors
- No Special Protective Equipment Required
- Minimum Require Any Kind of Pre or Post Preparation of Surface
- Top coat compatibility with any water based paint or Non-toxic, cementitious work
- FIX & CLEAN IT
It is important that the surface is stable and all the roofing sheets are properly fixed. Make sure that the roof/surface is dry, matt (not glossy), free of all dust, dirt, debris, oil, solvents and other impurities before starting the application that may adversely affect Elephant Shield’s - Liquid Rubber® adhesion.
- PREPARE IT
Be ready with brush/roller, Elephant Shield’s - Liquid Rubber® and Reinforcement Fabric or cotton cloth strips gathered at one place, in order to ensure a hassle-free application of Elephant Shield’s - Liquid Rubber®.
- COAT IT
Use the 3 course method with Elephant Shield’s - Liquid Rubber®
- Apply the first coat of Elephant Shield’s - Liquid Rubber®
- For larger Gaps, Cracks, Joints, Bolt holes, Parapet wall corner, Drainage area or Porous surface apply reinforcement fabric supplied with the buckets immediately after first coat
- Apply Second Coat of Elephant Shield`s - Liquid Rubber® above Reinforcement Fabric immediately and Third coat of Elephant Shield’s - Liquid Rubber® after 24 hrs
- At last apply two or three coats of Elephant Shield`s - Liquid Rubber® on remaining area as per methodology and application if needed
-
And It`s done! Your application area is now Waterproof, Damp Proof and Corrosion Proof. You can apply more layers to extend the life of your application in future.
- Waterproofing of Roof or Terrace (Metal, Wood, RCC, Asbestos/Cement/G.L Sheet, Stone, etc. Almost any material)
- Positive side Wall and Terrace damp proofing
- Waterproofing of Landscaping
- Waterproofing of Gutter Joints, Slab Joints, and Expansion Joints
- Corrosion protection of the outdoor structure
- Anti-corrosion Treatment of Metal Structure and underground utility overlap
- Water Proofing of Basement, Bathroom, and Water Features during construction
- Joints between structure and Inter-floor Waterproofing during construction
- Waterproofing of Foundation, Underground Structure, and Retaining Walls
- Above ground pond waterproofing
- Balcony waterproofing
- Waterproofing of Vertical walls and Metal/Polycarbonate sheet joints