UVENTIONS - Model UVPANEL -UV Disinfection During Operation Elevators
UV disinfection during operation; easy to install in almost any elevator. Real-time hygiene. safe and user-friendly use. Detection of people and animals at any time. Time and cost savings for disinfection. Break the chain of infection where transmission would otherwise happen. Complete documentation. Optimization of hygiene concepts.
The UVPANEL can be installed in almost any elevators. The installation takes place on the cabin ceiling.
Thanks to various sensors with which the UVPANEL is equipped, people as well as animals are detected in the effective range.
After the elevator has been used and is free of people, disinfection by means of UV-C light takes place automatically and autonomously.
As soon as persons or animals approach the effective area, disinfection in the elevator is stopped directly. The safety of the users is guaranteed at all times.
Disinfection is free of chemicals and only the amount of energy required is used.
Each disinfection process is logged and can be retrieved via the Bluetooth interface.
Most hygiene measures and processes follow a static pattern and a fixed interval. In the graphic, this can be seen in the gray lines.
This is decoupled from the actual use of rooms. This sometimes results in high germ loads on surfaces.
With the UVPANEL, use-oriented hygiene is implemented in publicly accessible areas and without interrupting ongoing operations. This can be seen from the magenta lines in the graphic.
By initializing the disinfection process at the next possible moment after the use of a room, and as soon as no person is in the effective area, germ contamination on the surfaces is reduced promptly and reliably.
The UVPANEL disinfects surfaces and air immediately after the elevator has been used or after people have come into contact with a surface. Due to the prompt destruction of possible infectious agents, high germ loads do not build up in the first place. The disinfection is user-oriented.
The UVPANEL bases its disinfection on the operation of the elevator, not the operation on the UVPANEL. The elevator does not have to be locked for disinfection, since the disinfection process starts during empty runs and thus uses every free second for disinfection.
Disinfection takes place without human interaction, so no manual intervention is required. The UVPANEL decides independently when and with what intensity disinfection can and may take place.
The UVPANEL uses the well-known UVC disinfection process. This process has been used successfully in many areas for years.
The UVPANEL reliably detects whether people are in the room or not. Even when they are not moving. Only when no one is guaranteed to be present does the system switch on. This completely excludes damage to the skin or eyes.
Due to the selection of particularly long-lasting components, maintenance or even the replacement of illuminants is not foreseen in the life cycle. Should intervention nevertheless be necessary, the system reports on its own and tells what needs to be done in clear and comprehensible messages.
When mounting the UVPANEL, you are not bound to any elevator control. It is mounted on the cabin ceiling and only requires a power supply.
With our technology, you can consciously avoid the use of chemicals and thus actively contribute to the protection of the environment. In addition, during the development of our products, attention was always paid to the longevity and sustainability of the individual components from the outset.
The protocols of the disinfection processes can be viewed in a variety of ways. Whether with our app, the cloud dashboard or in your own backend system, you decide. Do you want to receive active notifications about predefined events or determine yourself when and how you view the results? You determine when, what and how you receive the information and can adjust this at any time.