Consulting and Training Services
Below are the standard services that we will provide to you as our customer. Provide a START-UP SERVICE program, as follows: Conduct a plant survey to familiarize ourselves with the operation of the water and/or wastewater treatment facility. A schematic flow diagram of the system will be kept in file. Provide in-plant training to familiarize the operating engineers with the purpose of the treatment program; to instruct them in the testing and adjustment procedures. Provide safety training on how to administer any chemicals safely and how to use the MSDS. Provide a Program Manual as a reference handbook, containing information on program outline, control limits, test instructions, data sheets, MSDS.
Provide ROUTINE SERVICE calls on a regular basis (when the system is in operation) to ensure that the parameters of the water and/or wastewater treatment program are being kept within the specifications, as follows:
- Conduct analytical tests (most tests are done on-site).
- Review operator`s logs.
- Check the operation of any treatment systems, i.e., chemical feeding equipment, etc.
- Troubleshoot problems related to water and/or wastewater treatment
- Recommend the necessary corrections/adjustments.
- Provide further training and consulting as needed.
- Write a report on all findings, actions taken, and further recommendations
Provide ADDITIONAL SERVICES, at additional costs, as needed, to enhance the objectives of the water treatment program, as follows:
- Complete Program Outsourcing
- Provide special lab tests on water and/or deposit samples.
- Run efficiency studies to evaluate the operating efficiency of the systems.
- Provide technical support for improvement plans, such as the addition of pre-treatment systems, etc.
- Conduct feasibility studies.
- Conduct special training seminars.
- Installation and Repair of WET`s equipment.