Powder Paint Service

NJ plant available for your sheet metal finishing.

• Kooltronic’s new automated powder paint system can be used in a wide range of applications with different textures and finishes that require a powder coated finish.
• User-specified custom colors are applied with an automated process that exceeds the 720 hours of Salt Spray accelerated testing per ASTM B117-97 (Bellcore Specifications).
• Our continuous conveyorized automatic process can handle large volumes efficiently.
• Kooltronic offers true flexibility with an additional manual batch paint booth for small production runs.
• Our automatic paint booths can handle parts up to 24” deep x 48” long x 72” high.
• Special masking can be done as part of our custom service.
• The powder paint finishing process applied at Kooltronic is non-polluting and environmentally friendly.

• Overhead Conveyor System - Transports the parts in a continuous loop through all of the stages of the painting process. It allows us to handle a large volume of work with accuracy and efficiency.
• Five Stage Power Wash/Pretreatment System - This step is the key to the excellent corrosion protection afforded by the Kooltronic Powder Paint System. The pretreatment process prepares painted parts and creates a solid foundation for our baked on epoxy or polyester powder coatings. Each stage uses a tank, recirculating pump and nozzle array. All solutions are sprayed with nozzles directed at the parts from both sides of the Power Wash Tunnel. The five stage power wash/pretreatment system consists of:
• First Stage - A heated wash.
• Second Stage - A heated rinse.
• Third Stage - A pretreatment solution is applied to the unpainted parts.
• Fourth Stage - A heated rinse is used to remove the pretreatment solution.
• Fifth Stage - The final step is a sealer.At each stage of the above pretreatment process, the system chemistry is maintained to assure a level of quality that will protect your parts from harsh weather and corrosion.
• Water Dry Off Oven - Heated air, maintained at a uniform temperature, is circulated around the parts to dry the chemical protection applied during the pretreatment process.
• Paint Powder Application - Three powder paint booths are available for your use. Booths feature manual as well as automatic paint gun stations to assure maximum coverage.
• Cure Oven - Painted parts are heated in circulated air that is maintained at a uniform temperature.