Logo XPRT
Companies
Products
Services
Software
Training
Applications
Sign in
List your business
Flowline Inc.
About
Downloads
  2. Companies
  3. Flowline Inc.
  4. Software
  5. EchoPod - Model DL34 - Multi-Function ...

EchoPod - Version DL34 -Multi-Function Ultrasonic Level Transmitter

SHARE

The general purpose ultrasonic level transmitter provides continuous level measurement up to 18.0` (5.5m) with a 4-20 mA signal output, and is configured via our free Webcal software. The level sensor has 4 programmable relays with selectable hysteresis and fail-safe logic. The embedded level controller can lower cost by replacing external control hardware. This non-contact liquid level sensor is ideally suited for corrosive, sticky or dirty liquids, and is widely selected for day tank, skid, IBC, sump and process tank level applications.

Most popular related searches
ultrasonic level transmitter
non-contact liquid level sensor
ultrasonic level
level transmitter
continuous level monitoring
liquid level sensor
level sensor
non-contact level sensor
ultrasonic transmitter
level switch
  • Level detection, switch and control functions up to 18’ (5.5m)
  • Configuration is fast and easy via WebCal software and USB adapter
  • Narrow 3” beam width and short 8” dead band optimized for bulk tanks
  • Four programmable relays for switch, pump or valve control and fail-safety
    • 1 pump or valve with 3 alarms
    • 2 pumps lead-lag with 2 alarms
    • 2 pumps duplexing with 2 alarms
    • 4 independent switch point alarms
  • PVDF transducer and 6P polycarbonate enclosure for corrosive liquids
  • Automatic temperature compensation for accurate measurement

  • Range: 18’ (5.5m)
  • Accuracy: ± 0.2% of range
  • Resolution: 0.079” (2mm)
  • Dead band: 8” (20cm)
  • Beam width: 3” (7.62cm)
  • Configuration: WebCal® PC Windows®, USB 2.0
  • Memory: Non-volatile
  • Supply voltage: 24 VDC (loop)
  • Consumption: 0.5W
  • Loop resist.: 400Ω max
  • Signal output: 4-20 mA, two-wire
  • Signal invert: 4-20 mA or 20-4 mA
  • Signal fail-safe: 4 mA, 20 mA, 21 mA, 22 mA or hold last
  • Contact type: (4) SPST relays
  • Contact rating: 60 VA, 1A maximum
  • Contact fail-safe: Power loss: Hold last, Echo loss: Open, close or hold last
  • Hysteresis: Selectable
  • Process temp.: F: 20° to 140°, C: -7° to 60°
  • Temp. comp.: Automatic
  • Ambient temp.: F: -31° to 140°, C: -35° to 60°
  • Pressure: MWP = 30 PSI (2 bar)
  • Enclosure rating: Type 6P, encapsulated, corrosion resistant & submersible
  • Encl. material: Polycarbonate
  • Trans. material: PVDF
  • Cable jacket mat.: Polyurethane
  • Cable type: 9-conductor, shielded
  • Cable length: 48” (1.2m)
  • Process mount: 2” NPT (2” G)
  • Mount gasket: Viton®
  • Classification: General purpose
  • Compliance: CE, RoHS
  • Approvals: cFMus