Refine by
Industries served
- Chemical & Pharmaceuticals
- Manufacturing, Other
- Medical / Health Care
- Food and Beverage
- Water and Wastewater
- Agriculture
- Monitoring and Testing
- Oil, Gas & Refineries
- Energy
- Construction & Construction Materials
- Environmental
- Mining
- Waste and Recycling
- Metal
- Air and Climate
- Automobile & Ground Transport
- Commercial
- Pulp & Paper
- Aerospace & Air Transport
- Electronics and Computers
- Soil and Groundwater
- Health and Safety
- University / Academia / Research
- Defense
- Plastics & Resins
- Textile
- Paint
- Packaging
- Glassware
- Government
- Maritime/Shipbuild/Water Transport
- Communications / Telecom / Datacom
- Printing
- Travel & Leisure
- Logistics
- Forestry & Wood
- Retail
- Banking & Finance / Insurance / Legal
- Real Estate
- Dry Cleaning
- Household Appliances
- Furniture
- Leather & Tanning
- Publishing / Media / Marketing
- Domestic
Xprt Product Applications Available In Albania
16,582 applications found
Especially in the field of automotive industry the application of modern particle measuring technology is essential in the domains of quality control and ...
ByPalas GmbH based in  Karlsruhe, GERMANY
Different types of filters such as fiber filters, membrane filters and fabric filters can be used to remove particles from air flow. The removal of the particles by the filter happens via different mechanism including interception, impaction, diffusion and electrostatic attraction. Typically, the effectiveness of the filter is described with a filtration efficiency value, which is the efficiency of the filter to remove particles from the air flow in percentage (0–100 %). The amount of removed particles by ...
ByDekati Ltd. based in  Kangasala, FINLAND
Dekati measurement solutions for determination of particulate emissions from engines include both particle detection and sample conditioning solutions. For non-road and off-road emission measurements, we have complete measurement solutions both upstream and downstream exhaust after-treatment devices. The exhaust sample conditions in marine and aircraft engine emission measurements may vary a lot depending on the type of engine, type of fuel and also measurement ...
ByDekati Ltd. based in  Kangasala, FINLAND
Particle Measuring Systems has put together a team of industry experts and solutions to help you better understand and meet 21 CFR Part 11. Start here by watching an on-demand webinar, reading a paper, viewing our particle counter and data management solutions, or submitting a question to our ...
ByParticle Measuring Systems (PMS) based in  Niwot, COLORADO (USA)
Particle size is a geometric characteristic that is usually assigned to material objects with sizes ranging from nanometers to millimeters. There is a wide variety of real systems that contain particles within this size range. These systems are generally polydisperse, meaning that the particles in a particular sample vary in size. Therefore, in order to adequately characterize such systems, it is not sufficient to simply determine a single particle size. We must instead determine the system’s particle size ...
ByDispersion Technology, Inc. (DTI) based in  Bedford Hills, NEW YORK (USA)
There are two papers published on subject of applicability of ultrasound for characterizing CMP slurries, see below. There are also 2 newsletters, # 1 and # 13 on the same subject. Acoustics provides accurate particle size that agrees well with independent data. It can monitor presence of 1% large particles on the background of small nano-particles. Electroacoustics yields very precise value of zeta potential. These measurements can be done with no dilution, which opens possibility for continuous on-line control ...
ByDispersion Technology, Inc. (DTI) based in  Bedford Hills, NEW YORK (USA)
Whether you are studying ambient aerosol particles or synthetic nano particles, the scientific measurement devices of Airmodus will help you reach your research ...
ByAirmodus Oy based in  Helsinki, FINLAND
The CAST (Combustion Aerosol Standard) soot generator has a wide range of applications across various fields. Here are some of the key uses: Calibration of Measurement Instruments: CAST is extensively used to calibrate instruments that measure particulate matter, such as smoke meters, mass monitors, and laser-induced incandescence analyzers. Filter and Catalyst Testing: CAST soot generators are used to evaluate the performance of diesel particulate filters (DPFs) and other emission control devices. This helps in ...
ByJing Ltd. based in  Zollikofen, SWITZERLAND
Nearly 100 test rigs for the quality assurance and the development of filters are being used worldwide with great ...
ByPalas GmbH based in  Karlsruhe, GERMANY
Engine emission measurements are typically made in very different environments and conditions depending on the purpose of the measurement. Standardized and regulated particle emission measurements are made in test cell environments, PTI stations and on board a moving vehicles according the details described in the regulations and standards. For various research purposes, engine emissions can be measured in different conditions and even pre-DPF conditions. The requirements for the measurement instrument in these ...
ByDekati Ltd. based in  Kangasala, FINLAND
Advanced optics manufacturing is now requiring much cleaner processing environments than were necessary in the past. Smaller device structures, use of shorter wavelengths, and higher laser power densities are all factors that make advanced components more susceptible to damage from contamination. Particle Measuring Systems can provide you with the tools to determine how clean your environment ...
ByParticle Measuring Systems (PMS) based in  Niwot, COLORADO (USA)
As part of the construction of a new hospital complex on the site of the Princess Grace Hospital (CHPG) in Monaco, more than a hundred Ecomesure stations have been deployed to monitor fine particles inside and outside CHPG. The challenge is to ...
ByEcomesure based in  Saclay, FRANCE
Nitrogen is used in many areas of the chemical and pharmaceutical industry. Blanketing, cleaning and explosion prevention are just some examples. For example, nitrogen is used in jet mills in which pharmaceutical products are crushed and ground. In this context, pressure is used to press a gas into the mill at high speed. The materials circulating in the mill collide with the mill wall and with each other. This process causes the materials to decompose into ultra-fine particles. The use of nitrogen as a grinding ...
ByInmatec GaseTechnologie GmbH & Co. KG based in  Herrsching, GERMANY
Jet mills are used to grind and crush products in the pharmaceutical and food industries, for example. In this context, pressure is used to press a gas into the mill at high speed. This is done to generate a gas flow. The materials circulating in the mill collide with the mill wall and with each other and disintegrate into ultrafine particles. Contact with oxygen can result in a dangerous, flammable mixture in the mill. The use of nitrogen as a grinding and inert gas makes it possible to prevent explosions, ...
ByInmatec GaseTechnologie GmbH & Co. KG based in  Herrsching, GERMANY
Air purification inside homes, offices, schools, hotels, restaurants, and cafés, in order to create a healthy living and working ...
ByEnvironmental Nano Solutions BV based in  Cuijk, NETHERLANDS
To assess exposure at an industrial workplace UFP measurements were carried out. As part of a four-step approach starting with a paper risk-study in the second step NanoTracers were used to assess exposure from manufacturing processes vs. the local background levels. Using the mobile device specific spots in the manufacturing site could be identified that could be improved to reduce the exposure levels. As a next (third) step specific positions were identified to execute multi-day sampling of materials, to further ...
ByOxility BV based in  Breda, NETHERLANDS
Exposure to UFP due to air traffic has a growing attention. In the Netherlands several studies have been carried out on the largest airport, Schiphol. For mobile measurements NanoTracers were used in combination with more stationary equipment (eg SMPS). For the full report (in Dutch) see: ...
ByOxility BV based in  Breda, NETHERLANDS
UFP exposure in urban areas may be dependent on the selected mode of operation. In this study (carried out by Institute of Environmental Assessment and Water Research Barcelona Spain and DICeM�University of Cassino and Southern Lazio, Cassino Italy) 78 trips with walking, bus, tram and subway have been assessed. The particle concentration proved to be lowest in subway travel, and highest while travelling in diesel bus. City centre traffic crossings show particle transient peaks above ...
ByOxility BV based in  Breda, NETHERLANDS
Various industrial processes create exposure to Ultra fine particles. In case of engineered nanomaterials this is explicit. However, some processes create high exposure rates without EMN being involved. In this study, carried out by ArboNet (Dutch EHS organisation) in cooperation with software partner PIMEX the production of LCD screens with coatings based on nano-size particles was investigated. NanoTracers were used for personal mobile measurement as well as background sensing. Reference sensor was a SMPS. It ...
ByOxility BV based in  Breda, NETHERLANDS
Traditionally exposure assessment studies in developing countries have been bases on fixed-site monitoring. This study followed school children in three sites and quatified daily personal exposure to UFP with real time monitoring NanoTracer devices. Diaries were kept to correlate exposure levels to activity and the relevant micro-environment. The highest UFP exposures resulted from cooking and eating (64% of daily exposure, due to cooking on traditional wood-fired mud cookstoves). The lowest UFP exposures were ...
ByOxility BV based in  Breda, NETHERLANDS