Refine by
Industries served
- Chemical & Pharmaceuticals
- Manufacturing, Other
- Medical / Health Care
- Water and Wastewater
- Agriculture
- Monitoring and Testing
- Oil, Gas & Refineries
- Food and Beverage
- Energy
- Construction & Construction Materials
- Mining
- Environmental
- Waste and Recycling
- Air and Climate
- Metal
- Automobile & Ground Transport
- Commercial
- Pulp & Paper
- Aerospace & Air Transport
- Soil and Groundwater
- Electronics and Computers
- Health and Safety
- University / Academia / Research
- Defense
- Plastics & Resins
- Textile
- Paint
- Government
- Glassware
- Packaging
- Maritime/Shipbuild/Water Transport
- Communications / Telecom / Datacom
- Printing
- Travel & Leisure
- Logistics
- Forestry & Wood
- Retail
- Banking & Finance / Insurance / Legal
- Dry Cleaning
- Real Estate
- Household Appliances
- Leather & Tanning
- Furniture
- Publishing / Media / Marketing
- Domestic
Xprt Product Applications Available In Armenia
15,636 applications found
Slurry Flow and Potash Flurry Flow can sometimes contain lots of particles that make this measurement application quite abrasive and damaging to contacting equipment. A non-contacting solution is ideal for this sort of application, no moving parts and no contact with the measurement susbtance means the life expectancy of the product is extended. In addition, the non-contact nature of Pulsar Measurement products means that operators do not come into contact with the process and there is zero downtime of the ...
ByPulsar Measurement based in  Birmingham, UNITED KINGDOM
When manufacturing powders, for example dried drinking chocolate, it is common practice to concentrate a liquid before spray drying and this is typically done in an evaporator. The material is then processed through a spray drier where the remaining moisture is evaporated leaving fine particles of powder. Measuring the precise level of concentration of the liquid to identify the point at which it can be discharged can achieve considerable savings in the reduction of wasted materials and also provides increased ...
ByHydronix based in  Normandy, UNITED KINGDOM
A sensor can be used in a calandria before the pasturisation point when reducing a liquid. See also Calandria and Spray Drying. ...
ByHydronix based in  Normandy, UNITED KINGDOM
To ensure consistent results from a spray drying process it is important to know the maximum solids content of a concentrate before it enters the spray dryer. Hydronix sensors may be used to measure in the concentrate within a Calandria to ensure a consistently viscous material is fed to the spray dryer. ...
ByHydronix based in  Normandy, UNITED KINGDOM
The moisture content of coal may be measured. Pulverised Coal Injection is a common method of burning low grade or low carbon coal to create electricity. Small particle size low grade coal is measured as it is injected into the burners. The rate of injection is a direct function of the moisture content of the coal. As the material becomes drier the throughput is reduced to avoid serious overheating which can result in very significant financial loss and plant ...
ByHydronix based in  Normandy, UNITED KINGDOM
Aerosol particles are ubiquitous in ambient air and are of great importance to human and environmental health, climate change, and many industrial processes. The ability to measure their chemical composition is essential to understand the sources of aerosols, their chemical properties, and their potential ...
ByTofwerk AG based in  Thun, SWITZERLAND
Whether you are studying ambient aerosol particles or synthetic nano particles, the scientific measurement devices of Airmodus will help you reach your research ...
ByAirmodus Oy based in  Helsinki, FINLAND
In urban environment the number of aerosol particles changes fast. The mass based measurements do not provide information about these fast temporal variations. Especially since most of the particles are ultrafine ones. Ultrafine particles might not contribute remarkably to the mass, but are important with respect to health ...
ByAirmodus Oy based in  Helsinki, FINLAND
Materials science and engineering refers to the two-pronged method of studying the different mechanical properties of advanced materials and applying that knowledge to address global challenges in manufacturing and technology. It represents a tandem effort between various interconnected schools of thought – biology, chemistry, physics, advanced mathematics, and much more. At MIPAR Image Analysis, we have brought algorithmic image analysis into the materials science fold. With unmatched expertise in the ...
ByMIPAR Image Analysis based in  Worthington, OHIO (USA)
Speed up your mechanobiology study by performing single-cell adhesion measurements with the FluidFM technology! Traditionally, in Single-Cell Force Spectroscopy (SCFS) assays, the object of interest is glued to an AFM cantilever resulting in complex handling and low throughput. The FluidFM systems solve this issue by reversibly immobilizing a cell to a FluidFM Probe via suction, and subsequent release with a pressure pulse or brief washing. This gentle exchange of the cell allows the cantilever to be re-used for ...
ByCytosurge AG based in  Glattbrugg, SWITZERLAND
Several industries face problems from dust released during product transportation or processing. This is the case of the Textile, Wood Processing, Mining, Ink Manufacturing and other industries. Frequently, in order to maintain an appropriate level of particles suspended in the air (usually measured in Parts per Million by Volume), dust is extracted with air in strategically positioned caption points and typically recovered in cyclones or in bag filters. When filters have to be used to increase capture efficiency, ...
ByAdvanced Cyclone Systems, S. A. (ACS) based in  Porto, PORTUGAL
As part of the construction of a new hospital complex on the site of the Princess Grace Hospital (CHPG) in Monaco, more than a hundred Ecomesure stations have been deployed to monitor fine particles inside and outside CHPG. The challenge is to ...
ByEcomesure based in  Saclay, FRANCE
Hydrochloride Acid chimney sampling according to norm UNI-EN 1911 DLgs.152-2006. The system concerns a heated sonde including a set of glass tools to sample hydrochloride acid sampling gas getting in touch without affecting any metal part. A special impinger’s support deviceis placed outside the sonde, next to the heated recipient holding the filter holder. This process avoid forming condense in the sampling chain with the loss of the specimen. Normative allows two different kinds of sampling, the first one ...
ByAMS Analitica based in  Pesaro, ITALY
Whether you work in heavy industry, transport and logistics or construction, ground vibration monitoring is a key activity. To control the environmental impact of ground-bourne vibration, such as nuisance vibration or building damage, it’s vital to ...
ByCirrus Research plc based in  Hunmanby, UNITED KINGDOM
To protect humans and the environment from damage by air pollution, it is of the utmost importance to measure the levels of pollutants in the air. Real time monitoring of dangerous gases is particularly interesting in hazardous areas, as the conditions can change dramatically very quickly, with serious consequences. ADVANTICSYS employs its knowledge in wireless sensor networks to develop customized solutions for our ...
ByAdvantic Sistemas y Servicios S.L based in  Madrid, SPAIN
Water monitoring involves many different activitites, from ensuring the quality of surface or underground water, both for human beings and animal life, to the monitoring of a country’s water infrastructure. Wireless sensor networks are becoming increasingly popular in this area and ADVANTICSYS has already explored its use for many novel ...
ByAdvantic Sistemas y Servicios S.L based in  Madrid, SPAIN
Real time monitoring of structures is an excellent field of application for wireless sensor networks. ADVANTICSYS has provided solutions for the monitoring of structure in different fields, from bridges, where the vibration has to be controlled both in the construction and operation phase, to cultural heritage buildings with their structural integrity under ...
ByAdvantic Sistemas y Servicios S.L based in  Madrid, SPAIN
Gasification and synthetic gas production from various waste products are becoming increasingly important energy recovery technologies. Often, the synthetic gas contains various hazardous contaminants including H2S, HCl and other acids, heavy metals, and tars. The gas requires cleaning before it is introduced in the engine or boiler. Most of these processes generate significant concentration of tars. The tars can vary from very low molecular weight to large and complex ...
ByMacrotek Inc. based in  Markham, ONTARIO (CANADA)
RO desalination technology was initially developed in the late 1950s, and has now evolved into the leading desalination technology globally. There are many different processes used in RO desalination, and a variety of factors come into play when selecting the appropriate solution for each situation – the quality of the source water, the desired quantity and quality of the water produced, pretreatment, energy requirements and disposal of concentrate. At Advanced Equipment and Services we focus on desalination ...
ByAdvanced Equipment and Services, Inc. based in  Houston, TEXAS (USA)
![Multi-Sensor for Internet of Everything [IoE]](https://img.xprt.com/insecure/rs:fit:240:145/el:1/ex:1/bg:ffffff/f:webp/plain/https://ee-files.s3.eu-west-1.amazonaws.com/files/91320/applications/9597/91320_12_202008182019370830654.PNG "Multi-Sensor for Internet of Everything [IoE]")
Moving towards multi-sensor platforms that incorporate several sensing elements motivates many companies and organizations to seek for solutions in the fields of Internet of Things (IoT) and Machine-to-Machine (M2M). All these "things" having Internet wireless connection, need an available and reliable source of energy to operate. They are not working ...
BySol Chip Ltd. based in  Haifa, ISRAEL