- Home
- Applications
- belarus
- xrf spectrometer
Show results for
Refine by
Xrf Spectrometer Product Applications Available In Belarus
33 applications found
Air pollution, soils, grounds and wastewater Xenemetrix Energy Dispersive X-ray Fluorescence (ED-XRF) spectrometers bring expanded capabilities to environmental monitoring through the combination of proven detection methods with innovative technologies, including regulatory monitoring for compliance and ...
ByXenemetrix Ltd. based in Migdal Haemek, ISRAEL
Compliance with the RoHS and WEEE directives The Energy Dispersive X-ray Fluorescence (ED-XRF) spectrometers offer efficient solutions for the analytical requirements of the determination of regulated substances in electrical and electronic equipment according to the European Directive RoHS (Restriction of Hazardous Substances in Electrical and Electronic Equipment) and WEEE (Waste Electrical and Electronic ...
ByXenemetrix Ltd. based in Migdal Haemek, ISRAEL
Xenemetrix advanced ED-XRF spectrometers provide on-site quantitative analysis of mining products, thereby reducing the time for receiving results from days to seconds, compared to time consuming laboratory analysis. Materials recovered by mining, minerals or other geological materials that originate from the earth consist of all kinds of base metals - precious metals, iron, uranium, coal, diamonds, limestone, oil shale, rock salt and potash - all of which can be efficiently ...
ByXenemetrix Ltd. based in Migdal Haemek, ISRAEL
Traditional ICP - MS detection is slow, destructive, and costly. X - ray fluorescence (XRF) spectroscopy offers a fast, non - destructive, high - throughput alternative. This paper focuses on the EDX8800G MAX vertical XRF spectrometer's use in detecting impurities in graphite - based anode materials to meet industry standards. ...
ByEfficiency Scientific Instrument Co., Ltd (ESI) based in SuZhou City, CHINA
Before measuring the content of platinum, palladium, and rhodium in waste automobile exhaust catalysts, it is necessary to separate platinum, palladium, and rhodium from the catalyst and then measure them. The methods for separating and enriching ...
ByEfficiency Scientific Instrument Co., Ltd (ESI) based in SuZhou City, CHINA
Cement, a cornerstone of modern construction, is manufactured through a multi - step process: raw meal preparation, calcination, and clinker grinding. The raw meal, a blend of limestone (70 - 80%), clay, iron - bearing materials, and additives, dictates the final product's quality. Limestone provides calcium, while clay supplies silicon, aluminum, and iron ...
ByEfficiency Scientific Instrument Co., Ltd (ESI) based in SuZhou City, CHINA
Introduction Copper - chromium - arsenic (CCA) mainly consists of a mixture of copper, chromium, and arsenic salts or oxides. Copper quaternary ammonium (ACQ) is a blend of copper salts (calculated as copper oxide) and quaternary ammonium salt compounds ...
ByEfficiency Scientific Instrument Co., Ltd (ESI) based in SuZhou City, CHINA
Environmental research is perfectly supported with Bruker AXS wavelength dispersive X-ray fluorescence spectrometers (WDXRF) S8 TIGER. Accurate and precise determination of hazardous elements down to the sub-ppm level, reliable identification of elements due to high spectral resolution, high analytical performance even for light elements: The TIGER are perfectly suited for these analytical ...
ByBruker Corporation based in Billerica, MASSACHUSETTS (USA)
The catalyst alloy powder is mainly produced by high-temperature melting of iron-based materials, high-pressure water atomization and crushing, and vacuum drying. Our company used a series of catalyst alloy sheet standards with known contents of Ni, Mn, and Co to directly measure the intensities of the characteristic X-rays of Ni-Mn-Co on the energy dispersive X-ray fluorescence spectrometer EDX9000A alloy analyzer. The contents of Ni, Mn, and Co were fitted with the intensities of their characteristic ...
ByEfficiency Scientific Instrument Co., Ltd (ESI) based in SuZhou City, CHINA
The Compass200 portable X-ray fluorescence spectrometer soil analyzer was used to test the main heavy metal pollutants Cu, Zn, Pb, Cr and As in the soil. The results showed that the lowest detection limits of Cu, Zn, Pb, Cr and As elements were ...
ByEfficiency Scientific Instrument Co., Ltd (ESI) based in SuZhou City, CHINA
During the heating process dicalcium and tricalcium silicate, tricalcium aluminate, and a solid solution containing iron are formed. X-ray Fluorescence (XRF), a standard technique across the cement industry, is used to determine metal-oxide concentrations and oxide stoichiometry. The Rigaku NEX CG advanced Energy Dispersive X-ray Fluorescence (EDXRF) spectrometer, with its high sensitivity for light (low atomic number) elements, is the perfect cost-effective backup or supplement ...
ByApplied Rigaku Technologies based in Cedar Park, TEXAS (USA)
Gypsum, a monoclinic mineral mainly composed of calcium sulfate hydrate, comes in colors like white, gray, red, and brown. It's classified into raw gypsum, anhydrite, and hemihydrate gypsum. Raw gypsum has a density of 2.3 - 2.7 g/cm³, a Mohs hardness of about 2, is soft, highly absorbent, and colorless - transparent when crystalline, losing water upon heating. Formed by dissolution - precipitation or evaporation - precipitation, gypsum is widely distributed globally and abundant in China's Gansu and Inner ...
ByEfficiency Scientific Instrument Co., Ltd (ESI) based in SuZhou City, CHINA
The EDX9000A metal element analyzer is a state-of-the-art spectrometer recently developed by Inphase Scientific Instruments. This versatile instrument can effectively detect the concentrations of various elements, including titanium (Ti), vanadium (V), aluminum (Al), tungsten (W), niobium (Nb), magnesium (Mg), rare earth elements, cobalt (Co), sulfur (S), manganese (Mn), phosphorus (P), silicon (Si), chromium (Cr), nickel (Ni), molybdenum (Mo), copper (Cu) and more in materials such as carbon steel, alloy steel, ...
ByEfficiency Scientific Instrument Co., Ltd (ESI) based in SuZhou City, CHINA
Gypsum, a monoclinic mineral mainly composed of calcium sulfate hydrate, comes in white, gray, red and brown. It is classified into raw gypsum (dihydrate), anhydrite, and hemihydrate gypsum. Raw gypsum has a density of 2.3-2.7 g/cm³, Mohs hardness ~2, and is soft, highly absorbent, and colorless-transparent in crystal form, losing water upon heating. ...
ByEfficiency Scientific Instrument Co., Ltd (ESI) based in SuZhou City, CHINA
Analytical Chemistry study with Xenemetrix ED-XRF Modern research deals with the development of new forms of diagnostic technologies for different purposes, such as solutions for laboratory needs, devices and methods that deliver accurate and reliable results at a very high level of ...
ByXenemetrix Ltd. based in Migdal Haemek, ISRAEL
Copper, denominated on account of its characteristic purplish-red hue, pertains to industrial-grade pure copper. It exhibits a melting point of 1083 °C and a relative density of 8.9, which is fivefold that of magnesium. Copper is distinguished by its outstanding electrical and thermal conductivity. In terms of electrical conductivity, it is surpassed only by silver, endowing it with extensive applicability within the electrical industry. It is prevalently utilized in the fabrication of electric wires, cables, and ...
ByEfficiency Scientific Instrument Co., Ltd (ESI) based in SuZhou City, CHINA
Kyanite is a highly distinctive mineral. Its chemical composition is aluminum silicate (Al₂[SiO₄]O), and its crystals often take the form of flat columns. It boasts a wide range of colors, with blue being the most prevalent, and it can also be white, gray, or even have a slightly greenish hue. The EDX8800H Max possesses the following features: American AmpTek - FSDD detector, featuring high resolution and a high count rate. The vacuum testing environment offers the best detection effect for light elements. ...
ByEfficiency Scientific Instrument Co., Ltd (ESI) based in SuZhou City, CHINA
Fingerprinting all kinds of materials analyzed in forensic analysis Forensic scientists generally require fast and non-destructive analysis of a very wide range of materials. Often these materials are presented in very small quantity, as evidence collected from a crime scene. Using ED-XRF allows to measure a wide range of elements and concentrations: C(6)-Fm(100), without any need of sample preparations. Samples can be measured in many different formats such as powder, solid, liquid or in thin ...
ByXenemetrix Ltd. based in Migdal Haemek, ISRAEL
The Bayan Obo Mine plays a vital role in the growth of China's rare earth industry. Therefore, it is essential to perform a swift and precise analysis without altering the mine's structure. X-ray fluorescence spectrometry stands out for its ability to directly analyze both bulk and powdered samples. Additionally, it offers high accuracy, a broad range of analyzable elements (from Na to U), rapid analysis speed, and ease of use—perfectly aligning with the needs for quick and accurate qualitative and quantitative ...
ByEfficiency Scientific Instrument Co., Ltd (ESI) based in SuZhou City, CHINA
Museum curators, art historians, and archeologists analysis to alert Art, artifact and antique analysis can be done using non-destructive, fast and simple XRF methods to identify what items are made of. Art historians, archeologists and conservators are constantly concerned with the questions of where, when and by whom an object was made. Investigations of physical properties and especially chemical composition of artifacts are helpful and increasingly applied to allocate an object to a particular historic or ...
ByXenemetrix Ltd. based in Migdal Haemek, ISRAEL