Refine by
Industries served
- Chemical & Pharmaceuticals
- Manufacturing, Other
- Medical / Health Care
- Water and Wastewater
- Agriculture
- Monitoring and Testing
- Oil, Gas & Refineries
- Food and Beverage
- Energy
- Construction & Construction Materials
- Mining
- Environmental
- Waste and Recycling
- Air and Climate
- Metal
- Automobile & Ground Transport
- Commercial
- Pulp & Paper
- Aerospace & Air Transport
- Soil and Groundwater
- Electronics and Computers
- Health and Safety
- University / Academia / Research
- Defense
- Plastics & Resins
- Textile
- Paint
- Government
- Glassware
- Packaging
- Maritime/Shipbuild/Water Transport
- Communications / Telecom / Datacom
- Printing
- Travel & Leisure
- Logistics
- Forestry & Wood
- Retail
- Banking & Finance / Insurance / Legal
- Dry Cleaning
- Real Estate
- Household Appliances
- Leather & Tanning
- Furniture
- Publishing / Media / Marketing
- Domestic
Xprt Product Applications Available In Cambodia
15,625 applications found
SONARtrac PFM technology together with CYCLONEtracTM PST takes mill grinding efficiency to even higher levels - Combining the power of SONARtrac VF/GVF with PFM and CiDRA’s CYCLONEtrac Particle Size Tracking System (PST), which provides real-time particle size measurement of each cyclone, there is finally an integration of technologies that truly enables the transformation of data, to knowledge, to action, thereby providing the ability to optimize recovery, throughput and net metal production. When sump ...
ByCiDRA Corporate Services Inc. based in  Wallingford, CONNECTICUT (USA)
Air quality monitoring may involve measuring particle mass (PM), particle number concentrations (PN), particle size, or collecting particles for later chemical analysis. Air quality monitoring efforts are usually driven by governmental regulation, but may also be motivated by a neighborhood concern or scientific interest. These measurements are performed by researchers in industries or institutions, but they may also be performed by local advocacy groups. When combined with other information (such as weather data, ...
ByTSI Incorporated based in  Shoreview, MINNESOTA (USA)
To reduce the introduction, generation and retention of particles in cleanrooms, particle concentration controls are set ...
ByEcomesure based in  Saclay, FRANCE
It is well known that Particulate Matter (PM), harmful gases/aerosols or other pollutants due to natural or anthropogenic sources can have adverse effects on humans and the ecosystem. Therefore, in the last years, surveying large regions of the atmosphere in an automatic way has become a strategic objective of various public health organizations for early detection of pollutant sources in urban and industrial areas. The AAMS solutions have become a well-established method based on the combination of a photometer ...
ByCimel Electronique based in  Paris, FRANCE
The chemical industry involves many substances, also dangerous ones. For this reason, the correct handling of such chemicals is extremely important. Chemical laboratories deal every day with a lot of data deriving from many measurement methods. For this reason, the right laboratory software solution makes a big difference in quality. LIMS software is a good solution to manage both your lab and your workflows. ...
ByFink & Partner GmbH based in  , GERMANY
Providing you with a complete environmental monitoring solution. In this new era of smarter food safety, regional and local food and beverage manufacturing GMP regulations can be an asset to your business and products. Trust your contamination control monitoring and prevention to Particle Measuring Systems. We have been successfully controlling microbial and particulate contamination in critical regulated manufacturing environments worldwide for over 45 ...
ByParticle Measuring Systems (PMS) based in  Niwot, COLORADO (USA)
Slurry Flow and Potash Flurry Flow can sometimes contain lots of particles that make this measurement application quite abrasive and damaging to contacting equipment. A non-contacting solution is ideal for this sort of application, no moving parts and no contact with the measurement susbtance means the life expectancy of the product is extended. In addition, the non-contact nature of Pulsar Measurement products means that operators do not come into contact with the process and there is zero downtime of the ...
ByPulsar Measurement based in  Birmingham, UNITED KINGDOM
When manufacturing powders, for example dried drinking chocolate, it is common practice to concentrate a liquid before spray drying and this is typically done in an evaporator. The material is then processed through a spray drier where the remaining moisture is evaporated leaving fine particles of powder. Measuring the precise level of concentration of the liquid to identify the point at which it can be discharged can achieve considerable savings in the reduction of wasted materials and also provides increased ...
ByHydronix based in  Normandy, UNITED KINGDOM
A sensor can be used in a calandria before the pasturisation point when reducing a liquid. See also Calandria and Spray Drying. ...
ByHydronix based in  Normandy, UNITED KINGDOM
To ensure consistent results from a spray drying process it is important to know the maximum solids content of a concentrate before it enters the spray dryer. Hydronix sensors may be used to measure in the concentrate within a Calandria to ensure a consistently viscous material is fed to the spray dryer. ...
ByHydronix based in  Normandy, UNITED KINGDOM
The moisture content of coal may be measured. Pulverised Coal Injection is a common method of burning low grade or low carbon coal to create electricity. Small particle size low grade coal is measured as it is injected into the burners. The rate of injection is a direct function of the moisture content of the coal. As the material becomes drier the throughput is reduced to avoid serious overheating which can result in very significant financial loss and plant ...
ByHydronix based in  Normandy, UNITED KINGDOM
Aerosol particles are ubiquitous in ambient air and are of great importance to human and environmental health, climate change, and many industrial processes. The ability to measure their chemical composition is essential to understand the sources of aerosols, their chemical properties, and their potential ...
ByTofwerk AG based in  Thun, SWITZERLAND
Whether you are studying ambient aerosol particles or synthetic nano particles, the scientific measurement devices of Airmodus will help you reach your research ...
ByAirmodus Oy based in  Helsinki, FINLAND
In urban environment the number of aerosol particles changes fast. The mass based measurements do not provide information about these fast temporal variations. Especially since most of the particles are ultrafine ones. Ultrafine particles might not contribute remarkably to the mass, but are important with respect to health ...
ByAirmodus Oy based in  Helsinki, FINLAND
Materials science and engineering refers to the two-pronged method of studying the different mechanical properties of advanced materials and applying that knowledge to address global challenges in manufacturing and technology. It represents a tandem effort between various interconnected schools of thought – biology, chemistry, physics, advanced mathematics, and much more. At MIPAR Image Analysis, we have brought algorithmic image analysis into the materials science fold. With unmatched expertise in the ...
ByMIPAR Image Analysis based in  Worthington, OHIO (USA)
Speed up your mechanobiology study by performing single-cell adhesion measurements with the FluidFM technology! Traditionally, in Single-Cell Force Spectroscopy (SCFS) assays, the object of interest is glued to an AFM cantilever resulting in complex handling and low throughput. The FluidFM systems solve this issue by reversibly immobilizing a cell to a FluidFM Probe via suction, and subsequent release with a pressure pulse or brief washing. This gentle exchange of the cell allows the cantilever to be re-used for ...
ByCytosurge AG based in  Glattbrugg, SWITZERLAND
Whether you work in heavy industry, transport and logistics or construction, ground vibration monitoring is a key activity. To control the environmental impact of ground-bourne vibration, such as nuisance vibration or building damage, it’s vital to ...
ByCirrus Research plc based in  Hunmanby, UNITED KINGDOM
ROTA xfillR aseptic filling system is the perfect fit for processing the smallest batches in research and development as well as in the production of batches for clinical trials in the pharmaceutical and biotech industry. Filling different containers with just one extremely compact machine means not only time and cost savings, but also an investment in flexibility and thus lasting ...
ByRota Verpackungstechnik GmbH & Co.KG based in  Wehr, GERMANY
Nomestic Home Air Quality Solutions offer an innovative approach to understanding and improving your indoor environment. Our cutting-edge tools empower you to create a healthier, more comfortable home where your well-being thrives. Specializing in smart, effective air quality solutions, Nomestic helps you enhance your lifestyle through clean, pure air that supports overall ...
ByNomestic based in  Almere, NETHERLANDS
Utilizing 3D scanning wind measurement LIDAR, vehicle-mounted wind measurement LIDAR and airborne wind measurement LIDAR, the company provides efficient and accurate wind field and combustion particle characteristics monitoring services for forest fires, urban fires and other emergency rescue scenarios. Through rapid deployment and real-time data collection and analysis, combined with mature meteorological models, it realizes high-precision, high temporal and spatial resolution monitoring and short-term accurate ...
ByQingdao Leice Transient Technology Co., Ltd. based in  Qingdao, CHINA