- Home
- canada alberta
- Applications
Refine by
Industries served
- Chemical & Pharmaceuticals
- Manufacturing, Other
- Medical / Health Care
- Food and Beverage
- Water and Wastewater
- Agriculture
- Monitoring and Testing
- Oil, Gas & Refineries
- Energy
- Construction & Construction Materials
- Mining
- Environmental
- Waste and Recycling
- Air and Climate
- Metal
- Automobile & Ground Transport
- Commercial
- Pulp & Paper
- Aerospace & Air Transport
- Soil and Groundwater
- Electronics and Computers
- Health and Safety
- University / Academia / Research
- Defense
- Plastics & Resins
- Textile
- Paint
- Government
- Glassware
- Packaging
- Maritime/Shipbuild/Water Transport
- Communications / Telecom / Datacom
- Printing
- Travel & Leisure
- Logistics
- Forestry & Wood
- Retail
- Banking & Finance / Insurance / Legal
- Real Estate
- Dry Cleaning
- Household Appliances
- Leather & Tanning
- Furniture
- Publishing / Media / Marketing
- Domestic
Xprt Product Applications Available In Alberta
16,739 applications found
Complex, difficult-to-treat wastewater. Landfill leachate is a complex effluent with high concentrations of organics and heavy metals that poses significant environmental risk if left untreated. Our clients require consistent permeate quality to meet stringent environmental regulations. ...
ByCrossTek Membrane Technology LLC based in  Holbrook, MASSACHUSETTS (USA)
Sampling and analysis of fire effluents is an important part of assessing both the environmental impact and the threat to life caused by fires. Detailed knowledge about the composition and concentration of fire effluents is required to gain a good understanding about the potential impacts of fires and for efforts to diminish these impacts. Testing the composition of these fire effluents presents a challenge for the analytical equipment used to measure the gases. The amount of species and concentrations of interest ...
ByGasmet Technologies - a Nederman company based in  Vantaa, FINLAND
Heavy Metals Wastewater Treatment System (Chrome Removal): Chromium is present in the wastewaters of a number of industries, including: stainless steel manufacturing, protective coatings on metal, magnetic tapes, chrome plating, tanneries, textile dyes production, pigments and paint production, production of cement, paper, rubber, etc. Chromium is typically precipitated in two steps: reduction and ...
ByWesTech Engineering, LLC based in  Salt Lake City, UTAH (USA)
With years of experience in the pulp and paper industry, Membrane Specialists offers a full range of membrane filtration technologies that allow producers to more efficiently remove by-products and waste from both their products and effluent. We can engineer and build complete systems for traditional uses, such as water recycling and recovery of valuable by-products, as well as some new uses including the production of cellulosic ...
ByMembrane Specialists LLC based in  Hamilton, OHIO (USA)
Improve efficiency in the distribution of the effluent from septic tanks, versus drainage pipes or gravel ...
ByHidrostank SL based in  Tafalla, SPAIN
Problem: A significant portion of the operational costs of a conventional municipal wastewater treatment plant employing an aerobic biological treatment unit comes from electricity costs associated with aeration. In many cases, the aeration rates are kept at the maximum level to ensure that the plant’s effluent is in compliance with the regulations. The critical parameter for regulatory purposes and treatment efficiency, BOD, takes 5 days to measure through standard methods providing almost no value to the ...
ByUviTec, part of ABB (Formerly Real Tech Inc.) based in  Whitby, ONTARIO (CANADA)
In industrial operations, a significant quantity of product can be lost into the waste stream. The reason for the product loss can vary from leaky or faulty valves, to vessels overflowing, or to operator errors. Washing processes also create unavoidable product loss. Most of these losses are not large spills and it may take a while for the operators to detect them. In fact, frequent small losses can account for more than 50% of total losses. Significant benefits can be derived from continuous water quality ...
ByUviTec, part of ABB (Formerly Real Tech Inc.) based in  Whitby, ONTARIO (CANADA)
Wastewater quality can change drastically and quickly – particularly in the case of industrial discharges – that generate shock loads within the wastewater treatment system. In addition to potential operational problems such as increased chemical and aeration demand, shock loads also have the potential to affect regulatory compliance if wastewater cannot be treated properly. Real Tech’s BOD/COD monitoring systems provide continuous online measurement of COD and/or BOD, which are the most relevant parameters to ...
ByUviTec, part of ABB (Formerly Real Tech Inc.) based in  Whitby, ONTARIO (CANADA)
In industries such as pulp and paper toxic or difficult to treat contaminants can end up in the waste stream. Not being able to detect these toxic release events or other unexpected events in a timely manner can disrupt the biological treatment system and cause compliance issues or permit violations. Significant benefits can be derived from continuous water quality monitoring with an online sensor system. Real Tech provides practical, low cost solutions for continuously monitoring important industrial wastewater ...
ByUviTec, part of ABB (Formerly Real Tech Inc.) based in  Whitby, ONTARIO (CANADA)
Wastes that are rich in starch such as those that occur in potato processing industries require a balanced addition of other macronutrients such as nitrogen and phosphorus. In order to optimize the dosing of these nutrients it is essential to have a good idea about the organic load entering the biological treatment reactor. Measurement of colour can help with quality control and flavour ...
ByUviTec, part of ABB (Formerly Real Tech Inc.) based in  Whitby, ONTARIO (CANADA)
Wastewater from a textile facility contains a variety of dyes and organic chemicals from the manufacturing processes that are often difficult to treat. Spectral analysis is well suited for monitoring waste streams to identify problematic dyes prior to treatment. Continuous monitoring of effluent wastewater for BOD and COD helps to ensure effective treatment and quality of effluent to ensure regulatory goals are met prior to ...
ByUviTec, part of ABB (Formerly Real Tech Inc.) based in  Whitby, ONTARIO (CANADA)
Water is a critical element for the mining industry. It’s used for mineral processing, dust suppression, slurry transport and employees’ needs. The hitch is, mining plants are usually located in areas with low water supply. Massive amounts of water needed, paired with scarce water availability is not a good combination; but it is reality for the mining ...
ByE3 Solutions LLC based in  Tampa, FLORIDA (USA)
Wastewater treatment plants’ ultimate goal is to effectively and efficiently treat water so that it can be recycled safely back into the environment. This industry was designed to positively impact the environment by returning water to the earth; however, this process comes with its’ own many challenges and ...
ByE3 Solutions LLC based in  Tampa, FLORIDA (USA)
Clarify Wastewater from Fruits and Vegetables Processing. From conveying and washing to cooking and bottling, fruits and vegetables processing applications are highly dependent on water in the production processes. This also means there there will be significant amounts of wastewater produced that has elevated levels of organics. To manage the high volumes of wastewater and elevated levels of TSS, total suspended solids, JWC’s IPEC rotary drum screens should be utilized to help alleviate the inconvenient ...
ByJWC Environmental based in  Santa Ana, CALIFORNIA (USA)
Wastewater Treatment at Pet Food Processing Plants: As pet food processing plants render and blend animal proteins, vegetables, grains, and other organic ingredients to make wet and dry food, they produce significant amounts of wastewater with high concentrations of TSS, FOG, COD, and BOD. Screening of heavy solids prior to chemical/physical separation is an integral step in the wastewater treatment process. Sizing equipment based on solids loading and taking odor control measures are extremely important in these ...
ByJWC Environmental based in  Santa Ana, CALIFORNIA (USA)
Wastewater generated from food processing facilities has characteristics that set it apart from other types of wastewater. Fruit and vegetable wastewater is nontoxic and biodegradable, but has very high concentrations of BOD and TSS. Wastewater in meat, poultry and fish processing facilities contain high amounts of fat, oil and grease (FOG). Some facilities require large volumes of high quality water. ...
BySalsnes Filter based in  Namsos, NORWAY
Phathom sensors can be deployed in municipal settings like stormwater and wastewater treatment plants, and dams. Applications include monitoring turbidity and suspended solids at influent and discharge in treatment plants, and filtration monitoring and control to prevent water with high TSS content entering systems like ...
ByPhathom based in  Pukekohe, NEW ZEALAND
Improve quality in used and treated water. Uncontrolled algal growth in water bodies can lead to high levels of pH, BOD and TSS, making the extraction process, wastewater treatment and its disposal difficult. Treating algal blooms and monitoring water quality with LG Sonic technology improves water parameters, reduces further costs and productivity impacts, and prevents equipment clogging with minimal ...
ByLG Sonic B.V. based in  Zoetermeer, NETHERLANDS
Demand on food processing plants and municipal wastewaster facilities is increasing, ramping up pressure to process ever-higher levels of waste. The result? Improperly treated effluent into rivers, streams, and lakes. Envera has a solution that can stand up to ...
ByEnvera based in  West Chester, PENNSYLVANIA (USA)