- Home
- canada alberta
- Applications
Refine by
Industries served
- Chemical & Pharmaceuticals
- Manufacturing, Other
- Medical / Health Care
- Food and Beverage
- Water and Wastewater
- Agriculture
- Monitoring and Testing
- Oil, Gas & Refineries
- Energy
- Construction & Construction Materials
- Mining
- Environmental
- Waste and Recycling
- Air and Climate
- Metal
- Automobile & Ground Transport
- Commercial
- Pulp & Paper
- Aerospace & Air Transport
- Soil and Groundwater
- Electronics and Computers
- Health and Safety
- University / Academia / Research
- Defense
- Plastics & Resins
- Textile
- Paint
- Glassware
- Government
- Packaging
- Maritime/Shipbuild/Water Transport
- Communications / Telecom / Datacom
- Printing
- Travel & Leisure
- Logistics
- Forestry & Wood
- Retail
- Banking & Finance / Insurance / Legal
- Real Estate
- Dry Cleaning
- Household Appliances
- Leather & Tanning
- Furniture
- Publishing / Media / Marketing
- Domestic
Xprt Product Applications Available In Alberta
16,660 applications found
There are two papers published on subject of applicability of ultrasound for characterizing CMP slurries, see below. There are also 2 newsletters, # 1 and # 13 on the same subject. Acoustics provides accurate particle size that agrees well with independent data. It can monitor presence of 1% large particles on the background of small nano-particles. Electroacoustics yields very precise value of zeta potential. These measurements can be done with no dilution, which opens possibility for continuous on-line control ...
ByDispersion Technology, Inc. (DTI) based in Bedford Hills, NEW YORK (USA)
Whether you are studying ambient aerosol particles or synthetic nano particles, the scientific measurement devices of Airmodus will help you reach your research ...
ByAirmodus Oy based in Helsinki, FINLAND
The CAST (Combustion Aerosol Standard) soot generator has a wide range of applications across various fields. Here are some of the key uses: Calibration of Measurement Instruments: CAST is extensively used to calibrate instruments that measure particulate matter, such as smoke meters, mass monitors, and laser-induced incandescence analyzers. Filter and Catalyst Testing: CAST soot generators are used to evaluate the performance of diesel particulate filters (DPFs) and other emission control devices. This helps in ...
ByJing Ltd. based in Zollikofen, SWITZERLAND
High Efficiency odor, VOC and particle filtration without the high costs of energy and maintenance. Dynamic Air Cleaners have been used successfully around the world to remove VOCs, mold spores, and ultrafine particles from indoor air and outdoor ventilation air, and for mitigating odors from exhaust ...
ByDynamic Air Quality Solutions based in Princeton, NEW JERSEY (USA)
Dynamic Air Cleaners are used in clean manufacturing operations to remove dangerous airborne particles that other air cleaning systems miss…including ultrafine particles and gas phase contaminants...without producing any harmful ozone. Dynamic Air Cleaners also have a significant impact on removing odors from outside ventilation air. ...
ByDynamic Air Quality Solutions based in Princeton, NEW JERSEY (USA)
Of the almost 5 million commercial buildings in the U.S., retail buildings account for the largest energy bills and are responsible for the second largest percentage of greenhouse gas emissions, according to the EPA. There are a growing number of retail companies that are embracing the principles of sustainability, taking actions that are tangible, measurable and meaningful in reducing the use of scarce resources and improving the efficiency of their businesses. For a large company, this can add up to millions ...
ByDynamic Air Quality Solutions based in Princeton, NEW JERSEY (USA)
Nitrogen is used in many areas of the chemical and pharmaceutical industry. Blanketing, cleaning and explosion prevention are just some examples. For example, nitrogen is used in jet mills in which pharmaceutical products are crushed and ground. In this context, pressure is used to press a gas into the mill at high speed. The materials circulating in the mill collide with the mill wall and with each other. This process causes the materials to decompose into ultra-fine particles. The use of nitrogen as a grinding ...
ByInmatec GaseTechnologie GmbH & Co. KG based in Herrsching, GERMANY
Jet mills are used to grind and crush products in the pharmaceutical and food industries, for example. In this context, pressure is used to press a gas into the mill at high speed. This is done to generate a gas flow. The materials circulating in the mill collide with the mill wall and with each other and disintegrate into ultrafine particles. Contact with oxygen can result in a dangerous, flammable mixture in the mill. The use of nitrogen as a grinding and inert gas makes it possible to prevent explosions, ...
ByInmatec GaseTechnologie GmbH & Co. KG based in Herrsching, GERMANY
Air purification inside homes, offices, schools, hotels, restaurants, and cafés, in order to create a healthy living and working ...
ByEnvironmental Nano Solutions BV based in Cuijk, NETHERLANDS
To assess exposure at an industrial workplace UFP measurements were carried out. As part of a four-step approach starting with a paper risk-study in the second step NanoTracers were used to assess exposure from manufacturing processes vs. the local background levels. Using the mobile device specific spots in the manufacturing site could be identified that could be improved to reduce the exposure levels. As a next (third) step specific positions were identified to execute multi-day sampling of materials, to further ...
ByOxility BV based in Breda, NETHERLANDS
Exposure to UFP due to air traffic has a growing attention. In the Netherlands several studies have been carried out on the largest airport, Schiphol. For mobile measurements NanoTracers were used in combination with more stationary equipment (eg SMPS). For the full report (in Dutch) see: ...
ByOxility BV based in Breda, NETHERLANDS
UFP exposure in urban areas may be dependent on the selected mode of operation. In this study (carried out by Institute of Environmental Assessment and Water Research Barcelona Spain and DICeM�University of Cassino and Southern Lazio, Cassino Italy) 78 trips with walking, bus, tram and subway have been assessed. The particle concentration proved to be lowest in subway travel, and highest while travelling in diesel bus. City centre traffic crossings show particle transient peaks above ...
ByOxility BV based in Breda, NETHERLANDS
Various industrial processes create exposure to Ultra fine particles. In case of engineered nanomaterials this is explicit. However, some processes create high exposure rates without EMN being involved. In this study, carried out by ArboNet (Dutch EHS organisation) in cooperation with software partner PIMEX the production of LCD screens with coatings based on nano-size particles was investigated. NanoTracers were used for personal mobile measurement as well as background sensing. Reference sensor was a SMPS. It ...
ByOxility BV based in Breda, NETHERLANDS
In healthcare, Indoor Air Quality (IAQ) is mission critical. Medical equipment and facilities require increasingly higher levels of air quality. Further, patients, staff, and doctors all expect the air they breathe to be free of pathogens and contaminants. This has led to the use of more robust filtration systems that are able to address particle, biological, and gas phase contaminants. However, since over 90% of the cost of cleaning the air is the cost of the energy to move it through the system, providing ...
ByDynamic Air Quality Solutions based in Princeton, NEW JERSEY (USA)
Our system, originally designed for hospitals and cleanrooms, secures ultra pure indoor air in dental practices, laboratories and waiting rooms. Safeguarding staff and patients from small particles as small as 0.003 μm is an essential part of dental ...
ByGenano Industrial Air Purification Solutions - Genano Ltd. based in Espoo, FINLAND
Healthy Oil – No Problem: Generation 2™ elements remove water at 99.97% from oil, dramatically decreasing the formation of acids, diminishing the accelerated depletion of additives, keeping the Total Base Number (TBN) at a high level. By removing ultra-fine particles down to 1 micron, there is significantly less of a burden placed on the additives with less dirt to suspend, dramatically reducing mechanical wear while safely extending the oil change ...
ByL.B.S. Lubrication Units Inc. based in Ottawa, ONTARIO (CANADA)
Whether you are in the city, suburb or at a weekend getaway location, noise is an important factor in determining your quality of life or the success of your business. Many areas have local noise legislation that defines the noise limits that can be produced and experienced during the day or at night. This noise may be generated by vehicle traffic, aircraft, industrial sites, construction projects, entertainment events, or many other activities. ...
ByLarson Davis, a division of PCB Piezotronics based in Depew, NEW YORK (USA)
Monitoring exhaust gas from combustion engines, emitting a large number of different compounds and with rapidly changing concentrations due to variations in operating conditions, necessitates an instrument that measures in real-time and with high sensitivity – an IONICON PTR-TOFMS. ...
ByIonicon Analytik Ges.m.b.H. based in Innsbruck, AUSTRIA
Our SediMeter™ instruments are designed with sediment pollution monitoring in mind. They form part of a system with network and software components designed specifically for monitoring sediment spill sedimentation in sensitive biotopes. After all, sediment is natural in the environment, and it is only when it is in the wrong place at the wrong time that it becomes a pollutant. By measuring this in situ, and in real time, we enable companies to avoid causing environmental damage in the most cost-effective way ...
ByLindorm, Inc. based in Miami Springs, FLORIDA (USA)
Ormantine's air monitoring equipment is widely used to monitor both indoor and outdoor air quality. Continuous development allows us to provide equipment for a broad range of applications, covering short-term and long-term monitoring. Pollutants can be detected even at very low levels – limits of detection are typically in the low parts per billion (ppb) range. Ormantine USA's many solutions have applications from personal exposure monitoring to long term fence line monitoring ...
ByOrmantine USA Ltd., Inc. based in Palm Bay, FLORIDA (USA)