- Home
- Applications
- canada alberta
- exposure limit
Refine by
Exposure Limit Product Applications Available In Alberta
30 applications found
Depending on the type of solvents in case, the solvents have different long term exposure limits, which should be obeyed. Component specific measurements are necessary to protect the workers from exposure while avoiding unnecessary interruptions to the printing process from false ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Toluene Diisocyanate (TDI) and Methylenediphenyl diisocyanate (MDI) have exposure limits set by the Occupational Safety and Health Administration (OSHA) to ensure employee protection in polyurethane ...
ByDOD Technologies Inc based in Cary, ILLINOIS (USA)
Isocyanates are used as a raw material to produce a number of products . Personal exposure can occur while the products made with isocyanates are being applied, or when the materials are removed by grinding or thermal degradation. ...
ByMerck KGaA, Darmstadt, Germany based in Darmstadt, GERMANY
Isocyanates are used as a raw material to produce a number of products . Personal exposure can occur while the products made with isocyanates are being applied, or when the materials are removed by grinding or thermal degradation. ...
BySigma-Aldrich based in Bellefonte, PENNSYLVANIA (USA)
Premium
The risk can be evaluated by measuring worker exposure to various pollutants present in the air in work areas. The measured concentrations are then compared to the 8-hour time weighted averages for exposure (TWA) and to recommended exposure limits for shorter time periods (less than 15 ...
ByTeledyne Gas and Flame Detection based in Arras Cedex, FRANCE
H2S is extremely dangerous because, although people can smell it at low levels (about 5 ppb) it does not smell much worse at the exposure limit value of 10 ppm or at potentially fatal levels in excess of 100 ppm. ...
ByBoreal Laser Inc. based in Edmonton, ALBERTA (CANADA)
Anesthetic effect is being safer for patients and health care workers. However, occupational exposure to waste anesthetic gases (WAG) is far from being a problem solved. It is well agreed to keep the occupational exposure to a reasonable minimum by improved scavenging, ventilation and working habits alongside following national occupational exposure limits with waste gas exposure ...
ByGasera Ltd based in Turku, FINLAND
It is an undesired environmental component that may be damaging to workers and the surroundings. Exposure limits have thus been established by industries to make sure that the workers operate in a safe environment. ...
ByUnisearch Associates Inc. based in Concord, ONTARIO (CANADA)
In the effect, up to 20–30 percent of containers in major destination ports can contain air concentrations of chemicals on the level exceeding occupational exposure limits (OEL) and up to 70% of them can contain harmful chemicals. ...
ByGasera Ltd based in Turku, FINLAND
Premium
The almost closed environment means that high levels of air pollution often occur inside the tunnels. The limit values for the pollutants are often higher in tunnels than in open ambient air because the exposure time is normally limited, but it may still be necessary to monitor that the limit values are not exceeded. Traffic tunnels often have to be provided with ventilation to keep the levels of air pollutants below the applicable ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
In order to adequately face the challenges that a firefighter faces on a daily basis one should understand the importance of detecting the harmful gases present, in order to be alerted to danger and to ensure the correct precautions are taken to prevent exposure. Understanding the different types of gases and the dangers that they can pose to people is the first step in choosing the correct form of gas detection. Even the most common gases, such as oxygen and nitrogen, can have devastating effects if present at ...
ByTeledyne Gas and Flame Detection based in Arras Cedex, FRANCE
What if you had a portable clean air solution that integrated with your existing floor layout and limited worker exposure to harmful dust ...
ByDuroair Technologies Inc. based in Niagara Falls, ONTARIO (CANADA)
Base stations are required to enable mobile phone communication, including calls and data transfer. They consist of different electronic components and antennas and can be located on masts, on rooftops, or on the outside or inside of buildings. Base stations emit radiofrequency electromagnetic fields (RF EMF) in the range from several hundred MHz to several GHz. The exact frequency bands used differ between technologies (GSM, UMTS, CDMA2000, 4G, 5G) and between countries. RF EMF fields allow the transport of large ...
ByInternational Commission on Non-Ionizing Radiation Protection (ICNIRP) based in Oberschleissheim, GERMANY
Troy Acoustics, the worldwide leader in indoor, and outdoor shooting range noise control and acoustics, offers the world’s highest acoustic rating and the shooting range industry’s only guaranteed solution at a competitive per square foot ...
ByTroy Acoustics Corporation (TAC) based in Brunswick, GEORGIA (US) (USA)
Safe, natural MICROCAT microbial formulations from Bioscience, Inc., are specially formulated to maintain the health and stability of fish and shrimp aquaculture facilities. Made of a unique combination of specialized, naturally occurring microbes and other ingredients, MICROCAT products augment the existing beneficial microorganisms in shrimp and fish farming ...
ByMonera Technologies based in Allentown, PENNSYLVANIA (USA)
Magnetic resonance imaging (MRI) equipment uses a combination of strong static magnetic fields, and low and high frequency electromagnetic fields to provide an image of the scanned object. MRI devices for medical imaging are able to provide detailed images of different internal body structures within a relatively short timeframe. In comparison to alternative techniques such as X-rays and CT scans, MRI does not involve exposure to ionizing radiation, and thus avoids the associated carcinogenic risk. ...
ByInternational Commission on Non-Ionizing Radiation Protection (ICNIRP) based in Oberschleissheim, GERMANY
A variety of infrared lamps are used in industry e.g. for heating and drying; in medical settings e.g. treatment of sports and muscular injuries (mostly the more penetrating IR-A); and in office and home settings. Recently, infrared warming cabins, or ‘infrared saunas,’ have also become available for home or spa use. Their radiant heat is believed to have therapeutic benefits ranging from treatment of hypertension and congestive cardiac failure, to alleviating chronic pain and fatigue. Supportive ...
ByInternational Commission on Non-Ionizing Radiation Protection (ICNIRP) based in Oberschleissheim, GERMANY
Monitoring Hydrogen Peroxide, Peracetic Acid and Ethylene Oxide In Hospital Sterile Processing. Monitoring for chemicals (Hydrogen Peroxide, Peracetic Acid and/or Ethylene Oxide) released into the air during sterile processing is an essential part of your Quality Control (QC) program. Serving as an early warning to leaks and safety measure for your employees, ChemDAQ® monitors enable you to effectively manage the breathing environment. Just like equipment requires revalidation after a failed cycle, monitoring ...
ByChemDAQ, Inc. based in Pittsburgh, PENNSYLVANIA (USA)
LCD recycling, however, is facing the technology with new challenges. Mercury containing tubes are installed in the LCD monitors, requiring special care when recycling. Due to this reason URT has developed a special workbench on which the capillaries can be safely dismantled, subsequently shredded and the mercury is ...
ByURT Umwelt- und Recyclingtechnik GmbH based in Karlstadt, GERMANY
An integrated imaging solution for critical assessments and guided procedures that never leaves your side. Heart, lung and deep vein scans at the bedside. Support from diagnosis through PIV ...
ByButterfly Network, Inc based in Guilford, CONNECTICUT (USA)