- Home
- canada alberta
- Applications
Refine by
Industries served
- Chemical & Pharmaceuticals
- Manufacturing, Other
- Medical / Health Care
- Food and Beverage
- Water and Wastewater
- Agriculture
- Monitoring and Testing
- Oil, Gas & Refineries
- Energy
- Construction & Construction Materials
- Mining
- Environmental
- Waste and Recycling
- Air and Climate
- Metal
- Automobile & Ground Transport
- Commercial
- Pulp & Paper
- Aerospace & Air Transport
- Soil and Groundwater
- Electronics and Computers
- Health and Safety
- University / Academia / Research
- Defense
- Plastics & Resins
- Textile
- Paint
- Glassware
- Government
- Packaging
- Maritime/Shipbuild/Water Transport
- Communications / Telecom / Datacom
- Printing
- Travel & Leisure
- Logistics
- Forestry & Wood
- Retail
- Banking & Finance / Insurance / Legal
- Real Estate
- Dry Cleaning
- Household Appliances
- Leather & Tanning
- Furniture
- Publishing / Media / Marketing
- Domestic
Xprt Product Applications Available In Alberta
16,665 applications found
Disclose potential buried hazards and achieve higher detection rate, less construction costs and increase safety – while exceeding industry ...
ByKontur AS based in Trondheim, NORWAY
Sinus, Nasal, Maxillo-Facial, Mandibular, Aural, Brain, Trauma, Oncology, Neuro Angiography with SeeFactor ...
ByEpica Human Health based in Duncan, SOUTH DAKOTA (USA)
BK Corrosion provides a comprehensive range of cathodic protection and corrosion prevention equipment for companies in the utilities industry. Our cathodic protection instruments, including underground locators, reference electrodes, holiday detectors, and other test equipment, let you verify performance and troubleshoot issues quickly and efficiently. We also offer a complete line of exothermic welding supplies and equipment. ...
ByBK Corrosion, LLC based in Houston, TEXAS (USA)
High Efficiency odor, VOC and particle filtration without the high costs of energy and maintenance. Dynamic Air Cleaners have been used successfully around the world to remove VOCs, mold spores, and ultrafine particles from indoor air and outdoor ventilation air, and for mitigating odors from exhaust ...
ByDynamic Air Quality Solutions based in Princeton, NEW JERSEY (USA)
Dynamic Air Cleaners are used in clean manufacturing operations to remove dangerous airborne particles that other air cleaning systems miss…including ultrafine particles and gas phase contaminants...without producing any harmful ozone. Dynamic Air Cleaners also have a significant impact on removing odors from outside ventilation air. ...
ByDynamic Air Quality Solutions based in Princeton, NEW JERSEY (USA)
Of the almost 5 million commercial buildings in the U.S., retail buildings account for the largest energy bills and are responsible for the second largest percentage of greenhouse gas emissions, according to the EPA. There are a growing number of retail companies that are embracing the principles of sustainability, taking actions that are tangible, measurable and meaningful in reducing the use of scarce resources and improving the efficiency of their businesses. For a large company, this can add up to millions ...
ByDynamic Air Quality Solutions based in Princeton, NEW JERSEY (USA)
Nitrogen is used in many areas of the chemical and pharmaceutical industry. Blanketing, cleaning and explosion prevention are just some examples. For example, nitrogen is used in jet mills in which pharmaceutical products are crushed and ground. In this context, pressure is used to press a gas into the mill at high speed. The materials circulating in the mill collide with the mill wall and with each other. This process causes the materials to decompose into ultra-fine particles. The use of nitrogen as a grinding ...
ByInmatec GaseTechnologie GmbH & Co. KG based in Herrsching, GERMANY
Jet mills are used to grind and crush products in the pharmaceutical and food industries, for example. In this context, pressure is used to press a gas into the mill at high speed. This is done to generate a gas flow. The materials circulating in the mill collide with the mill wall and with each other and disintegrate into ultrafine particles. Contact with oxygen can result in a dangerous, flammable mixture in the mill. The use of nitrogen as a grinding and inert gas makes it possible to prevent explosions, ...
ByInmatec GaseTechnologie GmbH & Co. KG based in Herrsching, GERMANY
Air purification inside homes, offices, schools, hotels, restaurants, and cafés, in order to create a healthy living and working ...
ByEnvironmental Nano Solutions BV based in Cuijk, NETHERLANDS
To assess exposure at an industrial workplace UFP measurements were carried out. As part of a four-step approach starting with a paper risk-study in the second step NanoTracers were used to assess exposure from manufacturing processes vs. the local background levels. Using the mobile device specific spots in the manufacturing site could be identified that could be improved to reduce the exposure levels. As a next (third) step specific positions were identified to execute multi-day sampling of materials, to further ...
ByOxility BV based in Breda, NETHERLANDS
Exposure to UFP due to air traffic has a growing attention. In the Netherlands several studies have been carried out on the largest airport, Schiphol. For mobile measurements NanoTracers were used in combination with more stationary equipment (eg SMPS). For the full report (in Dutch) see: ...
ByOxility BV based in Breda, NETHERLANDS
UFP exposure in urban areas may be dependent on the selected mode of operation. In this study (carried out by Institute of Environmental Assessment and Water Research Barcelona Spain and DICeM�University of Cassino and Southern Lazio, Cassino Italy) 78 trips with walking, bus, tram and subway have been assessed. The particle concentration proved to be lowest in subway travel, and highest while travelling in diesel bus. City centre traffic crossings show particle transient peaks above ...
ByOxility BV based in Breda, NETHERLANDS
Various industrial processes create exposure to Ultra fine particles. In case of engineered nanomaterials this is explicit. However, some processes create high exposure rates without EMN being involved. In this study, carried out by ArboNet (Dutch EHS organisation) in cooperation with software partner PIMEX the production of LCD screens with coatings based on nano-size particles was investigated. NanoTracers were used for personal mobile measurement as well as background sensing. Reference sensor was a SMPS. It ...
ByOxility BV based in Breda, NETHERLANDS
In healthcare, Indoor Air Quality (IAQ) is mission critical. Medical equipment and facilities require increasingly higher levels of air quality. Further, patients, staff, and doctors all expect the air they breathe to be free of pathogens and contaminants. This has led to the use of more robust filtration systems that are able to address particle, biological, and gas phase contaminants. However, since over 90% of the cost of cleaning the air is the cost of the energy to move it through the system, providing ...
ByDynamic Air Quality Solutions based in Princeton, NEW JERSEY (USA)
Our system, originally designed for hospitals and cleanrooms, secures ultra pure indoor air in dental practices, laboratories and waiting rooms. Safeguarding staff and patients from small particles as small as 0.003 μm is an essential part of dental ...
ByGenano Industrial Air Purification Solutions - Genano Ltd. based in Espoo, FINLAND
Healthy Oil – No Problem: Generation 2™ elements remove water at 99.97% from oil, dramatically decreasing the formation of acids, diminishing the accelerated depletion of additives, keeping the Total Base Number (TBN) at a high level. By removing ultra-fine particles down to 1 micron, there is significantly less of a burden placed on the additives with less dirt to suspend, dramatically reducing mechanical wear while safely extending the oil change ...
ByL.B.S. Lubrication Units Inc. based in Ottawa, ONTARIO (CANADA)
The analysis of volatile organic compounds at low concentration levels is fundamental to pollution monitoring and control. Hiden’s Hydramass spectrometer is a multi-stream gas analysis system for analysis of volatile organic compounds to the sub ppm level. In sea water the analysis of volatile organic compounds is used for both pollution monitoring and ecological studies. Hiden’s HPR 40 dissolved species analyser provides ppb ...
ByHiden Analytical Ltd. based in Warrington, UNITED KINGDOM
Finding efficient ways to generate, deliver and consume energy resources while reducing pollution is an ongoing quest for the Energy & Utility Industries. HI-Q has developed instrumentation geared toward monitoring emissions and the dispersal of pollutants from power plants and industrial facilities. HI-Q base-line & stack sampling equipment has been used in studies to identify and track the spread of pollutants around the ...
ByHI-Q Environmental Products Company, Inc. based in San Diego, CALIFORNIA (USA)
Signal manufacture a wide range of Air Quality Monitoring equipment, from reference method integrated systems down to battery powered indicative ...
BySignal Group UK Ltd based in Camberley, UNITED KINGDOM
Oxygen (O2) is a colorless odorless gas, essential to all life on Earth but damaging in high concentrations. An O2 analyzer should thus be employed for safety management and air pollution prevention purposes. LasIR MP110 is perfect for continuous emission monitoring of O2. It is based on TDLAS technology and can be calibrated as an O2 analyzer, providing accurate and reliable measurements. It quickly responds to changes in compound concentration, thus providing continuous emission monitoring for the specified ...
ByUnisearch Associates Inc. based in Concord, ONTARIO (CANADA)