chile
Applications

Xprt Product Applications Available In Chile

15,383 applications found

Sensor-Based Sorting System for Blending Control

Real-time ore quality measurements allows our customers to blend seamlessly lower-grade ore with higher-grade ore from different locations at the mine site. With this capability, mining operations can maximize ore extraction without compromising the required final product quality. This not only reduces the waste pile but also increases revenue through higher ...

ByOreScanner based in Vilnius, LITHUANIA

Removal of Ferrous Metals in the Recycling Industry

Carbon steel metal can be separated from non-recyclables using Eriez magnetic separators. Eriez equipment, either as individual units or complete systems, is designed for efficient and economical processing of municipal solid waste, co-mingled recyclables, shredded automobiles, Electronic Scrap, Glass Cullet, Plastic (PET), foundry sand and many other resource recovery options. From permanent magnets to scrap drums and magnetic drums to metal detection for further material purity and feeding equipment, Eriez ...

ByEriez Magnetics Europe Ltd based in Caerphilly, UNITED KINGDOM

Magnets for the recycling industry

Master Magnets equipment is used in many recycling applications such as the recycling of automobiles, electrical goods, skip waste, domestic waste, in fact wherever there is a need to separate metals from other ...

ByBunting - Redditch based in Redditch, UNITED KINGDOM

Influent Phosphate Monitoring

Influent Phosphate Monitoring Continuous phosphate measurement at inlet of a wastewater treatment plant for feed-forward control. When water from a variety of sources enters the plant, continuous phosphate measurements are critical to ensure efficient process control and inform early chemical dosing during the primary treatment. In-Situ ChemScan mini analyzers with large, anti-clogging sample lines, a rugged manifold design and a self-cleaning pump to eliminate fouling provide a reliable, low-maintenance ...

ByIn-Situ Process based in Fort Collins, COLORADO (USA)

Wireless level radar for Chemicals industry

Offcourse safety is the number 1 priority when it comes to the distribution and handling of chemicals. To meet these high safety standards Staal Instruments introduces a non-invasive and non-contact level-measurement method for a broad spectrum of chemicals. For chemicals packed in plastic composite containers like PE drums or IBC’s, Staal Instruments provides a strap-on sensor solution; installed in seconds, always ...

ByStaal Instruments BV based in , NETHERLANDS

Application Note - Ultrasonic Steel Weld Testing

Ultrasonic testing is one of the two most popular methods for the non-destructive inspection of materials. The biggest advantage of this method compared to its main rival, radiography, is that it doesn‘t harm the human operator. Ultrasonic testing uses ...

BySONOTEC GmbH based in Halle (Saale), GERMANY

Environmental monitoring solutions for the landfill industry

Since 1982, QED has been the leading supplier of air-powered pumps for groundwater sampling, leachate and condensate management, providing expertise in groundwater monitoring, leachate level control and methane recovery systems and equipment to landfills ranging from small municipal facilities to large industrial and military sites, including the leading national and international solid waste management ...

ByQED Environmental Systems, Inc based in Dexter, MICHIGAN (USA)

Industrial monitoring solutions for the flow monitoring areas

Many large combustion plants are now required to monitor mass emissions of major pollutants and to do so requires an accurate measurement of stack gas velocity. The VCEM 5100 is certified to EN 15267 part 3 QAL 1 for all industrial processes including waste incineration. It has several key advantages, firstly the sensors optics are not in contact with the hot and dusty environment, the VCEM 5100 can monitor gases at temperatures exceeding 10000C and the analyser requires minimal maintenance. The VCEM 5100 can be ...

ByCodel - a Forbes Marshall company based in Bakewell, UNITED KINGDOM

Industrial monitoring solutions for the flow combustion efficiency areas

Combustion efficiency is of major importance on small boiler plants and the best way to monitor this is by monitoring CO2 emissions. CODEL offer the Model 1010 Cross-Duct CO monitor. Using Infra-red Gas Filter Correlation technology to filter out interferences such as dust and other gases. The Model 1010 has low maintenance requirements and meets the needs of most boiler applications. In addition to small boilers the Model 1010 is also used on Animal carcass incinerators and ...

ByCodel - a Forbes Marshall company based in Bakewell, UNITED KINGDOM

Monitoring solutions for the marine industry

While land-based industry has been subject to strenuous emissions regulations over the past decades, air emissions from sea-going ships’ machinery has so far been largely unregulated. As a result, according to EU statistics, ships have become the single biggest source of sulphur dioxide (SO2) within the EU. The US EPA (US Environmental Protection Agency) reports similar findings, i.e., that the proportion of air pollutants released which can be attributed to the shipping industry is increasing. MARPOL Annex ...

ByCodel - a Forbes Marshall company based in Bakewell, UNITED KINGDOM

Industrial monitoring solutions for the dust collectors areas

Most industrial processes have dust collectors of some form or other, the most popular being filter bag houses. Very few of these are covered by regulation other than to have a broken bag detector to prevent nuisance dusts escaping and creating a local nuisance. The CODEL StakGard is a low cost Tribo-electric monitor that directly measures mass particulate concentration by sensing the frictional charge created when particles collide with a conductor. The advanced electronics of the StakGard detect this signal and ...

ByCodel - a Forbes Marshall company based in Bakewell, UNITED KINGDOM

Industrial monitoring solutions for the flue gas desulphurisation areas

Most large coal fired plants have a flue gas desulphurisation (FGD) plant to lower SO2 levels to below emission limit levels. The CODEL GCEM 40 series is used to monitor SO2 levels after the FGD to ensure they are below required levels and to ensure that the process is not too efficient and using too much sorbent. In addition, many plants monitor pre and post the FGD to ascertain the efficiency of the ...

ByCodel - a Forbes Marshall company based in Bakewell, UNITED KINGDOM

Industrial monitoring solutions for the de-NOx plants areas

In recent years the number of Selective Catalytic Reduction (SCR) and Selective Non-Catalytic Reduction (SNCR) plants for De-NOx have increased significantly. Continuous analysis of NOx prior to the de-NOx plant is often required to measure the concentration generated by the combustion process. This may be required to provide feed-forward to the Ammonia/Urea injection system and also to allow the effectiveness of the reduction process to be assessed. Continuous analysis of NOx post-reduction is required to allow ...

ByCodel - a Forbes Marshall company based in Bakewell, UNITED KINGDOM

Data loggers and data acquisition monitoring solutions for the machine sector

Selection of machine monitoring data loggers for commercial, industrial, utility & construction equipment. Monitor and record runtime/uptime, preventative maintenance, condition, performance, energy, fault isolation, QC, and ...