Refine by
Industries served
- Chemical & Pharmaceuticals
- Manufacturing, Other
- Medical / Health Care
- Water and Wastewater
- Agriculture
- Monitoring and Testing
- Energy
- Oil, Gas & Refineries
- Construction & Construction Materials
- Food and Beverage
- Environmental
- Mining
- Waste and Recycling
- Metal
- Air and Climate
- Automobile & Ground Transport
- Pulp & Paper
- Aerospace & Air Transport
- Electronics and Computers
- Commercial
- Health and Safety
- Soil and Groundwater
- University / Academia / Research
- Defense
- Plastics & Resins
- Textile
- Packaging
- Paint
- Maritime/Shipbuild/Water Transport
- Communications / Telecom / Datacom
- Glassware
- Government
- Travel & Leisure
- Printing
- Forestry & Wood
- Retail
- Logistics
- Banking & Finance / Insurance / Legal
- Real Estate
- Dry Cleaning
- Publishing / Media / Marketing
- Furniture
- Household Appliances
- Leather & Tanning
- Domestic
Xprt Product Applications Available In Cuba
10,702 applications found
The high pressure pump used at the yard or on the road is absolutely necessary to: Clean the vehicle in all its parts, wheels, internal and external surfaces. Clean and cool the working parts during rebuilding of the new road asphalt. Plaster scarification. Rapid cleaning of hard asphalt or cement at ended ...
ByNeron Pumps based in  Ranica, ITALY
Hydraulic being available in all the trenchers working in the most impervious and remote areas of the planet, whilst electricity is unavailable in any cases or unacceptable for safety reasons and compressed air presents problems at higher ...
ByNeron Pumps based in  Ranica, ITALY
At Pollution Control Products, our burn off ovens are used for the safe removal of polymer buildup from expensive dies, molds, extrusion screws, breaker plates and other metal parts, eliminating the need for abrasives, toxic chemicals and their health and environmental risks. Below is a common application scenario for our ...
ByPollution Control Products Co. based in  Dallas, TEXAS (USA)
Coil coating makes use of a simple, but effective principle, to clean, pretreat and coat flat coils or sheets of steel or aluminium in a continuous operation, before other stages of industrial manufacture. Pickling is the cleaning part of this operation where acids are used to remove oxide layer and other ...
ByMST Chemicals based in  San Zenone al Lambro, ITALY
Applications of Coulson Ice Blast in the Petro Chemical sector: Ice Cleans hydrocarbons deposits Cleans convection section from combustion ashes Cleans Convection Section from Combustion Ashes Removes asphalt from steel panels Removes bitumen OCTG de-greasing Cleans polymer Tanks Cleans hose connectors and manifolds Cleans insulation jacketing Cleans post spill antioxidants Cleans turbine wheels and rotating parts Cleans stationary & mobile equipment Asbestos removal ...
ByCoulson Ice Blast based in  , IRELAND
NEXT CF (Carrier Fluid) is a nonflammable carrier fluid used alongside various silicones, lubricants and other coatings during device assemblies that require a uniform coat to be applied. ...
ByEnviro Tech International, Inc. based in  Melrose Park, ILLINOIS (USA)
Enviro Tech has been working with customers in the aerospace industry for more than 20 years. Our specialists are more than just familiar with aerospace chemicals and aerospace cleaning products, we are experts in their chemical makeup and manufacture. In addition to our high-quality aerospace cleaners, we offer a full suite of services and amenities that our clients have come to know, trust and depend on. For a convenient, comprehensive solution that meets your unique needs and specifications, count on the ...
ByEnviro Tech International, Inc. based in  Melrose Park, ILLINOIS (USA)
Enviro Tech manufactures EnSolv-Ionic, the leading nPB electronic cleaning solution. We’ve been perfecting this highly effective, patented formula since 1994, when Enviro Tech first opened its doors. Companies around the globe use and trust this stabilized n-Propyl Bromide (nPB) solvent as a cleaning solution for ...
ByEnviro Tech International, Inc. based in  Melrose Park, ILLINOIS (USA)
During stamping and mechanical machining operations the parts are greased or oiled Subsequently, these parts must be degreased, usually cleaned with solvents Manufacturers of cleaning machines offer different models of tubs and fountains that are suitable for different cleaning processes including solvent spraying. During mechanical maintenance, the various parts are usually also cleaned using solvents. Degreasing your mechanical parts with the same solvent is possible with Eco-Dec ...
Byeco-dec based in  Battice - Belgique, BELGIUM
In industry, a lot of water is needed and is contaminated by a wide range of pollutants in the most diverse production processes. Unfortunately, most of the industrial waste water is wasted. In order to avoid this, we are developing high-performance waste water treatment plants with the vacuum evaporator as the core element. ...
ByKMU LOFT Cleanwater GmbH based in  Hausen, GERMANY
Lingering pathogens are prevalent while traveling and it is crucial that all transportation means remain uninterrupted. Disinfection has become a significant part of the cleaning process for vehicles, vessels, aircraft, and other transportation ...
BySteraMist Disinfection based in  Frederick, MARYLAND (USA)
Polyurethanes bind, encapsulate, seal and insulate millions of parts and products throughout major industries such as Apparel, Appliances, Automotive, Furnishings, Electronics, Marine, Medical, Building and Construction. They are used in microcellular foam seals and gaskets, spray foam, durable elastomeric wheels and tires (such as roller coaster, escalator, shopping cart, elevator, and skateboard wheels), automotive suspension bushings, electrical potting compounds, high-performance adhesives, surface coatings ...
ByPollution Control Products Co. based in  Dallas, TEXAS (USA)
Niagara Systems has served the food processing industry for over 85 years, and our food processing parts washers are the best on the market. Whether it be pallets, bins, and totes used to transport products, the tooling used in the process, food products themselves or container cleaning in food processing operations — Niagara Systems has provided effective solutions for it ...
ByNiagara Systems based in  Mentor, OHIO (USA)
The Aireas metrology network in and around Eindhoven, the Netherlands has been operational since 2013. The network is consisting of 30 stations, 6 of which are equipped with the stationary NanoMonitor (successor device of the NanoTracer RM). The Network is used to drive public awareness of the impact of environmental parameters. Actual values are available via a life map open to the public, and awareness is further driven by social media activities (eg YouTube). See website (in Dutch): www. ...
ByOxility BV based in  Breda, NETHERLANDS
Queensland University has been using NanoTracers for studies on personal exposure measurement. Significant studies have been carried out on school traffic using both long-term reference studies and mobile NanoTracers that were carried by children on there daily school traffic routes. See: http://eprints.qut.edu.au/65099/1/MAZAHERI_School_children%E2%80%99s_personal_exposure_EST.pdf for more ...
ByOxility BV based in  Breda, NETHERLANDS
Exposure to UFP due to air traffic has a growing attention. In the Netherlands several studies have been carried out on the largest airport, Schiphol. For mobile measurements NanoTracers were used in combination with more stationary equipment (eg SMPS). For the full report (in Dutch) see: ...
ByOxility BV based in  Breda, NETHERLANDS
To determine the exposure to UFP of airport employees in 30 members of Kopenhagen Airport ground crew were followed during 8 days with NanoTracer personal exposure sensors. The setup of this study (performed by the Section of Environmental Health, Department of Public Health, University of Copenhagen), as well as first conclusions can be found here : ...
ByOxility BV based in  Breda, NETHERLANDS
UFP exposure in urban areas may be dependent on the selected mode of operation. In this study (carried out by Institute of Environmental Assessment and Water Research Barcelona Spain and DICeM�University of Cassino and Southern Lazio, Cassino Italy) 78 trips with walking, bus, tram and subway have been assessed. The particle concentration proved to be lowest in subway travel, and highest while travelling in diesel bus. City centre traffic crossings show particle transient peaks above ...
ByOxility BV based in  Breda, NETHERLANDS
Various industrial processes create exposure to Ultra fine particles. In case of engineered nanomaterials this is explicit. However, some processes create high exposure rates without EMN being involved. In this study, carried out by ArboNet (Dutch EHS organisation) in cooperation with software partner PIMEX the production of LCD screens with coatings based on nano-size particles was investigated. NanoTracers were used for personal mobile measurement as well as background sensing. Reference sensor was a SMPS. It ...
ByOxility BV based in  Breda, NETHERLANDS
Traditionally exposure assessment studies in developing countries have been bases on fixed-site monitoring. This study followed school children in three sites and quatified daily personal exposure to UFP with real time monitoring NanoTracer devices. Diaries were kept to correlate exposure levels to activity and the relevant micro-environment. The highest UFP exposures resulted from cooking and eating (64% of daily exposure, due to cooking on traditional wood-fired mud cookstoves). The lowest UFP exposures were ...
ByOxility BV based in  Breda, NETHERLANDS