cyprus
Applications

Xprt Product Applications Available In Cyprus

16,589 applications found

Water Treatment System for Mercury Coalescer

Specialists in advanced mercury removal systems delivering ultra-high performance and proven results. Mercury, though naturally occurring, poses a serious challenge in the oil and gas industry — demanding advanced hydrocarbon removal product government and hydrocarbon removal solution mining strategies for safe ...

ByOleology based in Henderson, AUSTRALIA

Water Measurement Monitors for Raw Water Intake Monitoring

The Situation: Hydrocarbons in municipal water supplies, including fresh water and desalination systems, are commonly limited to less than 1 part per million. Surface water from rivers, lakes, or the sea with marine traffic, nearby pipelines, or regular flooding can be contaminated by hydrocarbons. Freshwater treatment systems can be damaged by hydrocarbons or allow them to pass through undetected. Desalination systems using reverse osmosis (RO) membranes can be irreversibly damaged by the presence of ...

ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in Edmonton, ALBERTA (CANADA)

Water Recycling / Water Reuse

QUA is a leading-edge developer and manufacturer of advanced membrane products. These are engineered with innovative technologies, which are used to treat challenging waters. QUA is leveraging its deep roots in the expertise of staff that is highly experienced in water treatment technologies to become a global technology leader in the development of products for water and wastewater treatment ...

ByQUA Group LLC based in Canonsburg, PENNSYLVANIA (USA)

Measurement solution for high NH3 monitoring from wastewater

Protea was asked to supply a high level ammonia (NH3) measurement system for a waste water treatment plant. The reflux drums at the inlet to two ammonia stripping towers needed to be measured continuously. Protea designed a solution based around our Solus TDLAS analyser platform and a high level dilution system. The Solus analyser was configured for NH3 measurements in the range 0-500ppm. A dilution system incorporating special dilution probe and 19' control panel was installed before the analyser. This gave a ...

ByProtea Limited based in Middlewich, UNITED KINGDOM

Aquatech Oil Sands-Produced Water Treatment

For most oil sand recovery is accomplished with in-situ thermal processes like Steam Assisted Gravity Drainage (SAGD) and Cyclic Steam Stimulation (CSS), where steam and chemicals are injected to the liquefy the bitumen. The treatment and recycling of the produced water used in this process has a direct impact on the cost of oil production. Aquatech provides water treatment technologies that includes the recycling of the produced water used the process which has a direct impact on their the cost of oil ...

ByAquatech International Corporation based in Canonsburg, PENNSYLVANIA (USA)

Wastewater treatment for the sea- and inland ports/terminals

Facing the increasing oversea trade, the environmental protection of the oceans is becoming increasingly important. The motto of the International Maritime Organization of the United Nations in London (IMO), “Safe, secure and efficient shipping on clean oceans” confronts the shipping industry and in particular the terminal ports with growing challenges. The stored fuels, raw materials and resources of a country must not pollute the harbor water with their emissions in case of rain. Produced liquid ship ...

ByAWAS International GmbH based in Wilnsdorf, GERMANY

Wastewater treatment for the other industries

Water is the most widely used consumer good in the world. Save on water consumption and expensive canal dues with AWAS wastewater treatment and process water circulation technology. ...

ByAWAS International GmbH based in Wilnsdorf, GERMANY

Solutions for the oil & gas industry

The Oil and Gas industry represents an important market segment where DMT enhances value. Especially the use of Flash gas is increasing. These type of gases needs to be cleaned in order to protect the environment as well as the utilities where it is used. Easy to use desulphurisation techniques are more and more demanded, next to re-use of water and water treatment techniques. DMT designed a range of desulphurisation techniques especially for these purposes and has dedicated water treatment solutions. The variety ...

ByDMT Environmental Technology BV based in Joure, NETHERLANDS

Wastewater treatment for the metallurgic industry

Waste water in this sector has a high concentration of heavy metals, oils and products in decomposition. The oils and emulgents lead to foam production at the water treatment plants. The treatment of these oils is very ...

ByAguambiente based in La Cistérniga, SPAIN

Drinking water solutions for the TOC removal efficiency

Problem: Organic matter (UV254/TOC) in drinking water can react with chlorine to form harmful disinfection by-products (DBPs). Some removal of TOC is achieved through the conventional drinking water treatment processes, while carbon absorption may be used to further enhance the removal of TOC prior to chlorine ...

ByUviTec, part of ABB (Formerly Real Tech Inc.) based in Whitby, ONTARIO (CANADA)

Water treatment solutions for the food, beverage & tobacco industry

Food and beverage producers are constantly looking for production optimization while achieving the highest levels of quality and compliance. Lenntech provides sustainable complete solutions for ingredient, water and waste water treatment in food and beverage industry considering a wide range of technologies and ...

ByLenntech Water Treatment based in Delfgauw, NETHERLANDS

Water treatment solutions for the micro-electronics industry

Micro-electronics industry is probably the fastest growing industry driven mainly by the expansion of the computer and telecommunications markets, as well as the growing automotive, military and industrial electronic markets. The production of smaller and smaller microelectronic components is contributing for a great pressure for the purification of process waters, given the extreme high quality water demanded by the manufacturers Lenntech provides complete solutions for ultra pure water production for ...

ByLenntech Water Treatment based in Delfgauw, NETHERLANDS

Water treatment solutions for the mining & metallurgy industry

Contaminated mine water is generated when rock containing sulphidic minerals is exposed to water and oxygen, resulting in the production of acidity and high concentrations of metals and sulphate in the water. Mine drainage, process water and storm water associated with industrial activities are the main types of water produced in mining operation. The two primary aims of the treatment of contaminated mine water are to neutralize acidity and removal metals. Lenntech provides sustainable complete water treatment ...

ByLenntech Water Treatment based in Delfgauw, NETHERLANDS

Industrial wastewater solutions for electroplating wastewater

Reliably distilling complex and heavy metals: VACUDEST in electroplating applications. No company applying electroplating likes having to deal with the issue of “wastewater”. But what happens when authorities take samples of the wastewater unannounced, and finds the nickel limit has been well exceeded? A horror scenario resulting in a lot of stress, work and ...

ByH2O GmbH based in Steinen, GERMANY

Industrial Wastewater For Poultry

AQUA Industrial Watertreatment is an experienced supplier of wastewater treatment systems for the poultry industry. Many AQUA systems have been installed worldwide at satisfied customers. The waste water produced during the processing of poultry is highly polluted with proteins, fats, carbohydrates, blood, feathers and meat particles. Extensive knowledge of the poultry slaughtering process is essential in the design of an adequate water treatment installation. The method used for the internal transportation of ...

ByMarel Water Treatment B.V. based in Boxmeer, NETHERLANDS

Unearthing solutions for utilities industry

With federal regulations requiring the closing of power plants’ coal ash impoundments, PowerCap™ provides an ideal opportunity for utilities to deploy solar generation alongside active or retired coal-fired plants. One of the biggest hurdles to utility-scale solar is finding suitable sites with suitable grid infrastructure for interconnection. By nature, this problem is alleviated when solar is sited at an existing or retired power plant and the impoundments have been capped with ClosureTurf®. ...