- Home
- Applications
- denmark
- fuel testing
Refine by
Fuel Testing Product Applications Available In Denmark
14 applications found
Premium
Emissions from vehicles powered by fossil fuels have traditionally been tested in laboratories, but the results rarely reflect reality. ...
ByOPSIS AB based in Furulund, SWEDEN
Within the electronics industry manufacturers of ICs (integrated circuits), PCB and semiconductor devices use Carbolite bench top and floor standing ovens for a number of tests to prove their components. The Carbolite Peak series (PN Natural Convection Oven & PF Fan Convection Oven) as well as the GP General Purpose ranges of ovens are used at elevated temperatures over an extended period for burn-in and stress testing of components to detect faults. ...
ByCarbolite Gero Ltd - part of Verder Scientific based in Hope, UNITED KINGDOM
As the alternatives to fossil fuels for power generation and automotive power become more widespread and preferred, so has increased the research and testing of hydrogen gas in fuel cells. The hydrogen (H2) gas used in fuel cell has to be free of impurities in order to make the fuel cell as efficient as possible and so quality thresholds have been set in legislation. Such legislation as SAE J2719 provides hydrogen ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
Laboratories within the Petrochemical industry run the gamut from high throughput QC testing of fuels and lubricants within manufacturing facilities, to product formulation development in R&D labs, to used engine oil testing for fleets and equipment. ...
ByConfience based in Raleigh, NORTH CAROLINA (USA)
Premium
The manufacture and use of motor vehicles is always associated with gas and fire hazards and other risks. This applies to the production facilities in which individual components are manufactured or the vehicles are assembled, as well as tunnels and parking garages in which exhaust gases can accumulate. The type of gas hazard differs in the areas of application, but the goal to be achieved remains the same everywhere - the safety of people and the infrastructure. With its wide range of gas monitoring products, ...
ByTeledyne Gas and Flame Detection based in Arras Cedex, FRANCE
Premium
The use of ethanol as a gasoline additive has increased dramatically over the past few years and will likely continue to increase. For fuel blenders, this means an added challenge to avoid an incorrect blend that could lead to regulatory fines, loss of customer confidence and damage to equipment. A quick on-site analysis with a portable mid-infrared based analyzer, such as the InfraCal 2 Ethanol Blend Analyzer shown in the photo, can help fuel blenders quickly flag out-of-spec product and ensure the final blend ...
ByAMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA)
In its 2017 Infrastructure Report Card, the American Society of Civil Engineers assigned a “D+” to the US' aging energy infrastructure. Just a few weeks after the report was released, Los Angeles, New York and San Francisco were hit by major power outages on the same day. Mass transit was in chaos as the electrical outages caused the failure of signals and station lights. Office workers were stranded in elevators and hospital operating rooms were shut down. And businesses, factories, and homes went ...
ByGenCell Ltd based in Petah Tikva, ISRAEL
Selerity SFC Custom Applications: Selerity SFC Custom Applications offer distinct advantages over gas chromatography (GC) and liquid chromatography (HPLC) when: Compounds are not volatile enough for GC without derivatization. Compounds do not have chromophores suitable for UV detection under HPLC conditions. Compounds are unstable at typical GC temperatures. Universal detectors such as the flame ionization detector (FID) are desired that are not available for ...
BySelerity Technologies Inc. based in Salt Lake City, UTAH (USA)
The automotive industry is a major air pollution contributor and thus one of the most regulated industries in the world. Several gas monitoring techniques are widely used in the automotive industry for measuring vehicle emissions. Typical applications include live on-board exhaust monitoring (CO, CO2, N2O, NOx, formaldehyde, acetaldehyde, oxygen and moisture), analysis of raw and dilute exhaust gas from the engine and tailpipe with gas-bags (CO2, N2O, NOx, CH4, EtOH, THC, H2S, SO2, NH3, formaldehyde and ...
ByGasera Ltd based in Turku, FINLAND
Comprehensive development and test facilities for a range of thermal power and heat transfer systems are available at Energy Technology ...
ByEnergy Technology Centre Ltd based in East Kilbride, UNITED KINGDOM
Refuse derived fuel (RDF) are fuels that are mainly obtained from industrial, bulky and commercial waste or sorting residues from recyclable material sorting systems. In this way, the energy contained in the waste can be used, primary resources such as coal and gas can be saved and CO2 emissions ...
ByREDWAVE - Competence Center of BT-Systems GmbH based in Eggersdorf bei Graz, AUSTRIA
Premium
When it comes to combustion control, your air/fuel ratio (AFR) is vitally important. If you have too much fuel, you get incomplete combustion which costs money and reduces productivity. Too little fuel can cause wear and premature damage to your engines. Mass flow meters and controllers from Sierra Instruments are designed for precise fuel flow measurement, so you can optimize your AFR for ideal ...
BySierra Instruments, Inc. based in Monterey, CALIFORNIA (USA)
R&D tests using HNG in a fuel injection mixture is showing how effective HNG can be in making diesel and other fuels burns cleaner and more efficiently. Developments for a full scale implementation of the HNG Fuel Activator are in process with an initial focus on diesel fuels. ...
ByHydroInfra Technologies (HIT) based in Stockholm, SWEDEN
On-the-spot measurement of total microorganisms! fuel1Microbial growth in liquid hydrocarbon fuels and lubricants presents a major problem. Storage tanks, delivery systems, and filters can become fouled through microbial proliferation and metabolic activity, which results in a myriad of problems, including reduced product quality, storage system corrosion, and filter plugging. The best solution to this problem is early detection and ...
ByLuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA)