- Home
- Applications
- egypt
- process analysis
Refine by
Industries served
- Monitoring and Testing
- Metal
- Manufacturing, Other
- Food and Beverage
- Air and Climate
- Environmental
- Medical / Health Care
- Chemical & Pharmaceuticals
- Automobile & Ground Transport
- Water and Wastewater
- Energy
- Mining
- Oil, Gas & Refineries
- Construction & Construction Materials
- Defense
- Paint
- Pulp & Paper
- Waste and Recycling
- Soil and Groundwater
- University / Academia / Research
Process Analysis Product Applications Available In Egypt
117 applications found
Food Safety and sanitation plays a critical role in the food processing industry. The Hazard Analysis and Critical Control Point (HACCP) certification requires stable, safe and fast-working professional disinfection equipment to maintain food safety and microbial ...
ByBiotek Environmental Science Ltd.  based in  , TAIWAN
The halogen analyzer EDX8000B is used for the rapid determination of the components of chlorine, bromine, sulfur and metallic elements in plastic ...
ByEfficiency Scientific Instrument Co., Ltd (ESI) based in  SuZhou City, CHINA
In response to the complexity of the causes of air pollution, the combination of wind lidar, Raman and Mie scattering aerosol lidar, particulate flux lidar, ozone lidar and other equipment can not only monitor the distribution characteristics of particulate matter, spatial changes in ozone concentration, and dynamic evolution of the wind field in real time, but also deeply analyze the complete process of various pollutants, including sand and dust, from the source to the transmission path, until the final ...
ByQingdao Leice Transient Technology Co., Ltd. based in  Qingdao, CHINA
Quality control of the various metal industry processes. Metal forms an essential material in modern manufacturing, metal products being used everywhere. Using ED-XRF allows to measure a wide range of elements and concentrations - C(6)-Fm(100) - without the need for sample preparations (heating or destroying the sample). Samples can be measured in the form of loose powders or pressed into pellets and ready for measurement within ...
ByXenemetrix Ltd. based in  Migdal Haemek, ISRAEL
In the traditional mining & recycling analytical laboratory, all processes – from logging-in samples to executing the sample preparation – are performed manually. This results in a very labour-intensive and time-consuming process. On the other hand, automation can significantly speed up the analytical processes, reducing the processing time and improving the quality of analysis. Nucomat has developed several ...
ByNucomat based in  Lokeren, BELGIUM
The Meteorological Comprehensive Observation and Service Platform is an innovative comprehensive meteorological solution that is based on the networking technology of multiple lidars. It deeply integrates diversified observation technologies such as wind profile lidar, sounding instruments, satellites, and ground meteorological stations, and constructs a widely covered, richly layered, and highly accurate meteorological observation ...
ByQingdao Leice Transient Technology Co., Ltd. based in  Qingdao, CHINA
Procal supplies the oil refining industry with both process and emission monitoring analysers to meet a wide range of ...
ByProcal - Parker Hannifin Corp based in  Peterborough, UNITED KINGDOM
Copper alloys possess excellent electrical conductivity and are essential metallic materials in industry. In recent years, the substantial increase in global copper prices has further driven up the cost of copper alloy components. With the rapid advancement of science and technology, improving the performance of copper alloy materials has become of vital importance. Under high thermal conductivity or high heat conduction conditions, it is necessary to enhance their hardness, wear resistance, and anti-arc erosion ...
ByEfficiency Scientific Instrument Co., Ltd (ESI) based in  SuZhou City, CHINA
ChemTreat offers a complete line of utility, process, and functional chemistries for the pulp and paper industry. We have dedicated field personnel with over 20 years in the industry and experience working with unique specifications, as well as the full range of grade-based and finished product performance ...
ByChemTreat - Veralto based in  Glen Allen, VIRGINIA (USA)
Test Setup: 40 and 60 mL of wastewater were added to individual respirometer flasks each containing nutrient/mineral/buffer medium to form two different dilutions. TCMP was added to inhibit nitrification. 25 mL of seed from a laboratory scale reactor was added to each test reactor. Oxygen uptake was monitored using a CHALLENGE AER-200 respirometer for five days. A second dose of 40 and 60 mL of leachate sample was then added to each reactor and oxygen uptake was measured for another 5 ...
ByChallenge Technology based in  Springdale, ARKANSAS (USA)
Alloy analysis is the process of identification of the chemical composition of the sample. Opposite to PMI (Positive Material Identification), where the alloy grade is determined, it shows the material's whole element composition. The analysis can be carried out by an x-ray fluorescence (XRF) alloy tester, and it is widely used in a variety of industries: from aero-space testing to welding and scrap ...
ByElvatech Ltd. based in  Kyiv, UKRAINE
Compliance with the ASTM method at low concentrations sulfur. Sulfur is a major element of importance because it forms sulfuric acid in the atmosphere when burned and has harmful impact on the human health and on the environment. In the mid-2000's, the Environmental Protection Agency (EPA) began a program to greatly reduce the amount of Sulfur in petroleum products. The current allowable sulfur limit in vehicle fuel is 15 ppm (parts per million). To reduce the pollution coming from vessels the international ...
ByXenemetrix Ltd. based in  Migdal Haemek, ISRAEL
In the medical industry, the pursuit of safety, accuracy, and efficiency is paramount. Advanced technologies play a crucial role in enabling healthcare professionals to provide optimal care and make informed decisions. One such groundbreaking innovation is the Rapidox SF6 gas analyser, developed and manufactured by Cambridge Sensotec. Combining state-of-the-art capabilities with exceptional reliability, this cutting-edge device has revolutionised gas analysis in the medical sector, offering valuable insights ...
ByCambridge Sensotec Limited based in  St. Ives, UNITED KINGDOM
The development and production of drug delivery systems requires efficient and reliable control mechanisms to ensure the quality of the final products. These products can vary widely in composition and application. Therefore analytical tools such as the WITec imaging systems that provide both comprehensive chemical characterization and the flexibility to adjust the method to the investigated specimen are preferred in pharmaceutical ...
ByWITec GmbH based in  Ulm, GERMANY
Power generation is the process of converting / transforming primary energy sources (e.g. oil, natural gas, and hydro) into easy-to-use and easy-to-transport energy (secondary energy), e.g. electricity. For that purpose, there are several methods of generating electricity ...
ByLAR Process Analysers - a brand by Process Insights, Inc. based in  Berlin, GERMANY
On-line Monitoring of Bioprocesses. PTR-MS systems can be used to gather highly relevant process related information in biopharmaceutical fermentations from analyzing volatile metabolites in the fermenters ...
ByIonicon Analytik Ges.m.b.H. based in  Innsbruck, AUSTRIA
Composition of Natural Gas, Syngas via VOC Speciation The composition of fuel gas is important in order to determine calorific value and also to detect any unwanted contaminants in the gas. Online analysis is important in order to give real-time and direct action on ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
To address the synergistic pollution of ozone (O3), volatile organic compounds (VOCs) and fine particulate matter (PM2.5) in key regions of China. By assembling a team of experts from top institutions such as Ocean University of China (OUC), Anguang Institute of Chinese Academy of Sciences (AIAS), and Xi'an University of Technology (XUT), the team will analyze in depth the causes of air pollution, including local emission sources, regional transmission contributions, and meteorological conditions, and will provide ...
ByQingdao Leice Transient Technology Co., Ltd. based in  Qingdao, CHINA
Servomex has set the standard for gas analysis in the Industrial Gas (IG) market for the last 60 years. From air separation to gas bottling and transportation, we've pioneered monitoring technologies and ground-breaking systems solutions that deliver accurate sensitivity, unparalleled performance and reduced cost of ...
ByServomex - a Spectris Company based in  Sugar Land, TEXAS (USA)
IONICON PTR-MS systems can analyze trace gas concentrations of volatile metabolites in the off-gas of bio-pharmaceutical fermentations in real-time. This highly relevant process related information can be used for on-line process monitoring and process ...
ByIonicon Analytik Ges.m.b.H. based in  Innsbruck, AUSTRIA