Refine by
Industries served
- Chemical & Pharmaceuticals
- Manufacturing, Other
- Medical / Health Care
- Water and Wastewater
- Agriculture
- Monitoring and Testing
- Oil, Gas & Refineries
- Food and Beverage
- Energy
- Construction & Construction Materials
- Mining
- Environmental
- Waste and Recycling
- Air and Climate
- Metal
- Automobile & Ground Transport
- Commercial
- Pulp & Paper
- Aerospace & Air Transport
- Electronics and Computers
- Soil and Groundwater
- Health and Safety
- University / Academia / Research
- Defense
- Plastics & Resins
- Textile
- Paint
- Government
- Glassware
- Packaging
- Communications / Telecom / Datacom
- Maritime/Shipbuild/Water Transport
- Printing
- Travel & Leisure
- Logistics
- Forestry & Wood
- Retail
- Banking & Finance / Insurance / Legal
- Real Estate
- Dry Cleaning
- Household Appliances
- Furniture
- Leather & Tanning
- Publishing / Media / Marketing
- Domestic
Xprt Product Applications Available In Egypt
15,310 applications found
Air quality monitoring may involve measuring particle mass (PM), particle number concentrations (PN), particle size, or collecting particles for later chemical analysis. Air quality monitoring efforts are usually driven by governmental regulation, but may also be motivated by a neighborhood concern or scientific interest. These measurements are performed by researchers in industries or institutions, but they may also be performed by local advocacy groups. When combined with other information (such as weather data, ...
ByTSI Incorporated based in Shoreview, MINNESOTA (USA)
To reduce the introduction, generation and retention of particles in cleanrooms, particle concentration controls are set ...
ByEcomesure based in Saclay, FRANCE
It is well known that Particulate Matter (PM), harmful gases/aerosols or other pollutants due to natural or anthropogenic sources can have adverse effects on humans and the ecosystem. Therefore, in the last years, surveying large regions of the atmosphere in an automatic way has become a strategic objective of various public health organizations for early detection of pollutant sources in urban and industrial areas. The AAMS solutions have become a well-established method based on the combination of a photometer ...
ByCimel Electronique based in Paris, FRANCE
The chemical industry involves many substances, also dangerous ones. For this reason, the correct handling of such chemicals is extremely important. Chemical laboratories deal every day with a lot of data deriving from many measurement methods. For this reason, the right laboratory software solution makes a big difference in quality. LIMS software is a good solution to manage both your lab and your workflows. ...
ByFink & Partner GmbH based in , GERMANY
Providing you with a complete environmental monitoring solution. In this new era of smarter food safety, regional and local food and beverage manufacturing GMP regulations can be an asset to your business and products. Trust your contamination control monitoring and prevention to Particle Measuring Systems. We have been successfully controlling microbial and particulate contamination in critical regulated manufacturing environments worldwide for over 45 ...
ByParticle Measuring Systems (PMS) based in Niwot, COLORADO (USA)
Slurry Flow and Potash Flurry Flow can sometimes contain lots of particles that make this measurement application quite abrasive and damaging to contacting equipment. A non-contacting solution is ideal for this sort of application, no moving parts and no contact with the measurement susbtance means the life expectancy of the product is extended. In addition, the non-contact nature of Pulsar Measurement products means that operators do not come into contact with the process and there is zero downtime of the ...
ByPulsar Measurement based in Birmingham, UNITED KINGDOM
When manufacturing powders, for example dried drinking chocolate, it is common practice to concentrate a liquid before spray drying and this is typically done in an evaporator. The material is then processed through a spray drier where the remaining moisture is evaporated leaving fine particles of powder. Measuring the precise level of concentration of the liquid to identify the point at which it can be discharged can achieve considerable savings in the reduction of wasted materials and also provides increased ...
ByHydronix based in Normandy, UNITED KINGDOM
A sensor can be used in a calandria before the pasturisation point when reducing a liquid. See also Calandria and Spray Drying. ...
ByHydronix based in Normandy, UNITED KINGDOM
To ensure consistent results from a spray drying process it is important to know the maximum solids content of a concentrate before it enters the spray dryer. Hydronix sensors may be used to measure in the concentrate within a Calandria to ensure a consistently viscous material is fed to the spray dryer. ...
ByHydronix based in Normandy, UNITED KINGDOM
The moisture content of coal may be measured. Pulverised Coal Injection is a common method of burning low grade or low carbon coal to create electricity. Small particle size low grade coal is measured as it is injected into the burners. The rate of injection is a direct function of the moisture content of the coal. As the material becomes drier the throughput is reduced to avoid serious overheating which can result in very significant financial loss and plant ...
ByHydronix based in Normandy, UNITED KINGDOM
Aerosol particles are ubiquitous in ambient air and are of great importance to human and environmental health, climate change, and many industrial processes. The ability to measure their chemical composition is essential to understand the sources of aerosols, their chemical properties, and their potential ...
ByTofwerk AG based in Thun, SWITZERLAND
Whether you are studying ambient aerosol particles or synthetic nano particles, the scientific measurement devices of Airmodus will help you reach your research ...
ByAirmodus Oy based in Helsinki, FINLAND
In urban environment the number of aerosol particles changes fast. The mass based measurements do not provide information about these fast temporal variations. Especially since most of the particles are ultrafine ones. Ultrafine particles might not contribute remarkably to the mass, but are important with respect to health ...
ByAirmodus Oy based in Helsinki, FINLAND
Materials science and engineering refers to the two-pronged method of studying the different mechanical properties of advanced materials and applying that knowledge to address global challenges in manufacturing and technology. It represents a tandem effort between various interconnected schools of thought – biology, chemistry, physics, advanced mathematics, and much more. At MIPAR Image Analysis, we have brought algorithmic image analysis into the materials science fold. With unmatched expertise in the ...
ByMIPAR Image Analysis based in Worthington, OHIO (USA)
Speed up your mechanobiology study by performing single-cell adhesion measurements with the FluidFM technology! Traditionally, in Single-Cell Force Spectroscopy (SCFS) assays, the object of interest is glued to an AFM cantilever resulting in complex handling and low throughput. The FluidFM systems solve this issue by reversibly immobilizing a cell to a FluidFM Probe via suction, and subsequent release with a pressure pulse or brief washing. This gentle exchange of the cell allows the cantilever to be re-used for ...
ByCytosurge AG based in Glattbrugg, SWITZERLAND
Several industries face problems from dust released during product transportation or processing. This is the case of the Textile, Wood Processing, Mining, Ink Manufacturing and other industries. Frequently, in order to maintain an appropriate level of particles suspended in the air (usually measured in Parts per Million by Volume), dust is extracted with air in strategically positioned caption points and typically recovered in cyclones or in bag filters. When filters have to be used to increase capture efficiency, ...
ByAdvanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL
As part of the construction of a new hospital complex on the site of the Princess Grace Hospital (CHPG) in Monaco, more than a hundred Ecomesure stations have been deployed to monitor fine particles inside and outside CHPG. The challenge is to ...
ByEcomesure based in Saclay, FRANCE
Hydrochloride Acid chimney sampling according to norm UNI-EN 1911 DLgs.152-2006. The system concerns a heated sonde including a set of glass tools to sample hydrochloride acid sampling gas getting in touch without affecting any metal part. A special impinger’s support deviceis placed outside the sonde, next to the heated recipient holding the filter holder. This process avoid forming condense in the sampling chain with the loss of the specimen. Normative allows two different kinds of sampling, the first one ...
ByAMS Analitica based in Pesaro, ITALY
Whether you work in heavy industry, transport and logistics or construction, ground vibration monitoring is a key activity. To control the environmental impact of ground-bourne vibration, such as nuisance vibration or building damage, it’s vital to ...
ByCirrus Research plc based in Hunmanby, UNITED KINGDOM
To protect humans and the environment from damage by air pollution, it is of the utmost importance to measure the levels of pollutants in the air. Real time monitoring of dangerous gases is particularly interesting in hazardous areas, as the conditions can change dramatically very quickly, with serious consequences. ADVANTICSYS employs its knowledge in wireless sensor networks to develop customized solutions for our ...
ByAdvantic Sistemas y Servicios S.L based in Madrid, SPAIN