- Home
- Applications
- faroe islands
- reference method
Refine by
Reference Method Product Applications Available In Faroe Islands
21 applications found
Premium
Effective measures against food fraud, efficient and healthy food processing and the development of functional food and neutraceuticals are just few of many challenges in modern Food and Beverage production and analysis. BUCHI offers classical reference methods and near infrared spectroscopy for food analysis, but also visualization of production processes using spray drying and ...
ByBUCHI based in Flawil, SWITZERLAND
Signal manufacture a wide range of Air Quality Monitoring equipment, from reference method integrated systems down to battery powered indicative ...
BySignal Group UK Ltd based in Camberley, UNITED KINGDOM
Premium
The US EPA’s method 30B is designed as a reference method for determination of mercury emissions with stack gases. The method uses sorbent traps to capture total mercury from stack gas. Use of different sorbent traps also enables mercury speciation measurement. Method 30B is widely used for regulatory CEMM verification and for national and international research programs. ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
It offers outputs in Transmission, Opacity and mg/m3 (when calibrated against a Standard Reference Method). The DCEM 2100 offers real-time zero and span calibration and an efficient air purge system to prevent optical ...
ByCodel - a Forbes Marshall company based in Bakewell, UNITED KINGDOM
Iron deficiency affects up to one third of the world’s population and is one of the leading risk factors for disability and death worldwide 1. Yet, it is still underdiagnosed and undertreated 2. Iron is essential for the body’s proper functioning and is needed to maintain energy levels and concentration, thus, an iron deficiency can leave patients feeling fatigued, unable to concentrate and cold. It is therefore essential to assess the body’s iron reserves. Ferritin has been scientifically and ...
ByAbionic SA based in Epalinges, SWITZERLAND
Gene synthesis refers to the artificial synthesis of double-stranded DNA molecules in vitro. At present, the required target DNA fragments are mainly obtained and amplified through gene cloning. Gene cloning is a revolutionary research technology, which can be summarized as: dividing, cutting, connecting, transferring, and selecting. The ultimate goal is to introduce the target gene into the host cell through corresponding technical means, and the target gene is replicated in large numbers in the host cell. ...
ByCD Biosciences - htDNA-chip® based in Shirley, NEW YORK (USA)
SCION Instruments offers the solution for detailed hydrocarbon analysis (DHA) of stabilized crudes. This application note details how SCION Instruments 4X6 and the new 8X00 GC-platform equipped with the 8400PRO autosampler can be used in the ...
BySCION Instruments BV - Techcomp Group based in GP Goes, NETHERLANDS
SCION Instruments offers the solution for a simulated distillation of middle distillates and lubricating base oils. In our latest Application Note, discover how the 8500 and 8300 GC platforms can be used for safer and more efficient simulated ...
BySCION Instruments BV - Techcomp Group based in GP Goes, NETHERLANDS
If you work with gypsum, you know how crucial moisture measurement is to making a high-quality product. Computrac® understands; that’s why Computrac has been the de facto industry standard for moisture measurement in gypsum for decades. The Computrac MAX® 4000XL will provide accurate results quickly for free moisture, bound moisture, and gypsum purity. If you need even more information about your gypsum, the Computrac MAX® 5000XL can even determine the residual paper content of recycled ...
ByAMETEK Brookfield based in Middleboro, MASSACHUSETTS (USA)
Optimize processes and deliver consistent quality. Maybe you’re serious about snacks. Or nuts about nuts. Maybe you’re all about oils. Or perhaps baked goods are your bread and butter. Whatever the case, you know that accurate moisture control is critical to the success of your food products. The Computrac® family of moisture analyzers will enable you to quickly obtain reliable, repeatable moisture content results, independent of operator ...
ByAMETEK Brookfield based in Middleboro, MASSACHUSETTS (USA)
The SCION Instruments 8X00 GC-platform provides a robust and complete solution for the simulated distillation of distillates and lubricating base oils, following standardized method EN15199-1. This Application Note demonstrate that this method and the ...
BySCION Instruments BV - Techcomp Group based in GP Goes, NETHERLANDS
Quickly test cathode powders and other advanced materials: In batteries, it has never been more critical to get the best quality product to market. Whether intended for an electric car, a smartphone, or a smoke detector, the quality of any battery will depend on how accurately its moisture content is controlled. Computrac can help. Computrac can quickly provide moisture-specific and total solids content results in a manner that does not depend on operator technique. In addition to instruments based on the ...
ByAMETEK Brookfield based in Middleboro, MASSACHUSETTS (USA)
Safely analyze solvent- and non-solvent-based coatings. Your customers rely on your paints and coatings to keep their assets safe from their environments. You can rely on Computrac® to provide accurate, reliable readings in minutes on solids and ash content for your products. Computrac Moisture, Solids and Ash analyzers can be used in ASTM method D7323-06, and can be correlated to other test methods, including D2369, and D5095. Further, Computrac® is the ONLY rapid loss-on-drying analyzer with Nitrogen ...
ByAMETEK Brookfield based in Middleboro, MASSACHUSETTS (USA)
There is a requirement for many small boiler operators to monitor Opacity to determine the smoke density emitted from the boiler. On small boilers we recommend the DCEM 1001 Opacity monitor; this simple, low cost monitor has high efficiency air purges use compressed air to ensure that optical surfaces are virtually free of dust or debris contamination. This ensures minimal maintenance is required on the ...
ByCodel - a Forbes Marshall company based in Bakewell, UNITED KINGDOM
Nearly 35% of respiratory allergy sufferers experience both allergic rhinitis and asthma, which impact their quality of life 1,2. Standard diagnostic methods such as skin tests are at times impossible or difficult to perform, have limited reliability and must be performed by trained Allergy and Asthma Specialists. Similarly, laboratory blood tests for specific immunoglobulin E (sIgE) levels have a long turnaround time until results, thus delaying treatment up to several days and requiring multiple visits. Fast and ...
ByAbionic SA based in Epalinges, SWITZERLAND
If you make a living on chemical reactions, you know that accurate moisture, solids and ash content control is critical to a successful reaction. Whether your product is organic or inorganic, flammable or flame-retardant, exotic or commoditized, Computrac has an instrument that will help you make your process more productive, more reliable, and more profitable. The Computrac line of instruments can provide primary measurements for solids content, ash content, total volatile content, and water-specific moisture ...
ByAMETEK Brookfield based in Middleboro, MASSACHUSETTS (USA)
Computrac moisture, solids and ash analyzers are able to quickly and easily determine solids content of cakes, slurries and sludge samples for the wastewater, hazardous waste and landfill industries. Identifying the optimal solids content of these byproducts of the treatment process can provide significant cost savings on chemical additives, haulage and incineration. Computrac analyzers are easy to use and their rugged and reliable design means that you’ll get accurate results whether they’re in the ...
ByAMETEK Brookfield based in Middleboro, MASSACHUSETTS (USA)
Accurate CO monitoring is essential for effective, proactive hemodynamic management, especially for patients in whom CO is low or changing. An independent study at New York-Presbyterian/Columbia University Medical Center conducted in 40 liver transplant and cardiac surgery patients in the OR or ICU using continuous PA catheter as the reference showed that the Argos Monitor was 50% more accurate than the market leader’s monitor, and that it was 45-50% better in patients with CO < 5 L/min or with changing ...
ByRetia Medical, LLC based in Valhalla, NEW YORK (USA)
Several EU directives and national laws in European countries set requirements for continuous monitoring of flue gas emissions at power plants. The demand for emission measurements has only increased in recent years and the trend will undoubtedly continue. It is therefore increasingly important for power plants to have reliable information available on emission of air pollutants. A power plant’s license to operate can even depend on it. Because the reduction of emissions to desired levels requires ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
The reference EN 13284-1 provide two different way about stack sampling, depending on emission conditions. The first option provide sampling with a standard probe with inserted perpendicularly into the duct filter holder to the emission flow. This option is recommended for emissions not involving humidity and with low temperature. It allows using non-perpendicular filter holders to sampling flow, reminding to consider also as part of the sampling all the collected parts ahead of the ...
ByAMS Analitica based in Pesaro, ITALY