Refine by
Industries served
- Chemical & Pharmaceuticals
- Manufacturing, Other
- Medical / Health Care
- Food and Beverage
- Water and Wastewater
- Agriculture
- Monitoring and Testing
- Oil, Gas & Refineries
- Energy
- Construction & Construction Materials
- Environmental
- Mining
- Waste and Recycling
- Metal
- Air and Climate
- Automobile & Ground Transport
- Commercial
- Pulp & Paper
- Aerospace & Air Transport
- Electronics and Computers
- Soil and Groundwater
- Health and Safety
- University / Academia / Research
- Defense
- Plastics & Resins
- Textile
- Paint
- Packaging
- Glassware
- Government
- Maritime/Shipbuild/Water Transport
- Communications / Telecom / Datacom
- Printing
- Travel & Leisure
- Logistics
- Forestry & Wood
- Retail
- Banking & Finance / Insurance / Legal
- Real Estate
- Dry Cleaning
- Household Appliances
- Furniture
- Leather & Tanning
- Publishing / Media / Marketing
- Domestic
Xprt Product Applications Available In Germany
16,659 applications found
How to convert waste tyres to useful resources? Now, it is no longer a problem. With 18 years' experience in the field of tyre pyrolysis, and continuous research, development and improvement, Doing group provides the latest waste tyre pyrolysis plant which has reached a high level in technology. The Waste tyre pyrolysis plant adopts the new green pyrolysis technology. Through the use of the tire pyrolysis oil plant, waste tyres can be effectively converted to fuel oil, carbon black and steel wire. The oil from ...
ByHenan Doing Machinery Equipment Co., Ltd. based in  Zhengzhou, CHINA
With a staggering 1.5 billion tyres reaching their end-of-life, globally, every year, these complex rubber products have long been a tricky problem for the waste industry to solve. However, tyre shredding innovation has continued at pace, which means everything from standard car/passenger tyres, through to more rugged truck and off the road (OTR) tyres, can now be efficiently processed for a variety of recycling and energy recovery applications with our tyre shredding ...
ByUntha Shredding Technology Gmbh based in  Kuchl, AUSTRIA
In the realm of waste management, we specialize in transforming what was once considered waste, including used tires and much of the material destined for landfills, into valuable sources of usable energy. The potential inherent in these discarded materials is vast, and our expertise lies in providing sustainable and innovative solutions that not only address waste-related challenges but also create new revenue ...
ByClean Energy Technologies, Inc. based in  Irvine, CALIFORNIA (USA)
GEP ECOTECH has been working with waste tires for many years and offers a wide range of options for recycling waste tires: shredding and grinding, cracking pre-treatment, making TDF. We can supply abundant tire recycling equipment such as tire shredder, tire wire separator, tire wire drawing machine, rubber block breaker, ...
ByZhengzhou GEP Ecotech Co Ltd. based in  Zhengzhou, CHINA
The main components of waste materials produced in paper mills are plastics, steel wire and residual pulp. Several of these materials are mixed to form large objects which are difficult to separate. Every year, the amount of waste discharged by paper ...
ByAIShred - GEP ECOTECH Co., Ltd based in  Zhengzhou, CHINA
RESEARCH: Compound management systems. Next gen sequencing equipment. High throughput screening automation. HTS automation Drug discovery / Research / Innovation / Science. Sample ...
ByBioNex Solutions, Inc. based in  San Jose, CALIFORNIA (USA)
Online analyzers are used throughout the natural gas value chain. The well site is monitored to understand the treatment requirements in the processing plant. During processing, H2S must be reduced to low ppm levels before LNG pre-liquefaction or the sales pipeline. During long stretches of pipeline, natural gas and natural gas liquids (NGL) must be monitored to ensure contractual compliance. Finally, at the custody transfer and distribution stage, natural gas must be corrected for ...
ByGalvanic Applied Sciences Inc. based in  Calgary, ALBERTA (CANADA)
The food & beverage industry relies on process analyzers to help them optimize product quality. Various physical and chemical properties must be continuously monitored in order to achieve consistency in quality, assure health and safety compliance, and maximize yields. If the final products do not meet the customer’s requirements, profits are negatively impacted. Large quantities of water must be treated in order to meet the raw material specifications. Achieving ...
ByGalvanic Applied Sciences Inc. based in  Calgary, ALBERTA (CANADA)
Nearly 100 test rigs for the quality assurance and the development of filters are being used worldwide with great ...
ByPalas GmbH based in  Karlsruhe, GERMANY
Engine emission measurements are typically made in very different environments and conditions depending on the purpose of the measurement. Standardized and regulated particle emission measurements are made in test cell environments, PTI stations and on board a moving vehicles according the details described in the regulations and standards. For various research purposes, engine emissions can be measured in different conditions and even pre-DPF conditions. The requirements for the measurement instrument in these ...
ByDekati Ltd. based in  Kangasala, FINLAND
Advanced optics manufacturing is now requiring much cleaner processing environments than were necessary in the past. Smaller device structures, use of shorter wavelengths, and higher laser power densities are all factors that make advanced components more susceptible to damage from contamination. Particle Measuring Systems can provide you with the tools to determine how clean your environment ...
ByParticle Measuring Systems (PMS) based in  Niwot, COLORADO (USA)
As part of the construction of a new hospital complex on the site of the Princess Grace Hospital (CHPG) in Monaco, more than a hundred Ecomesure stations have been deployed to monitor fine particles inside and outside CHPG. The challenge is to ...
ByEcomesure based in  Saclay, FRANCE
ByPostnova Analytics GmbH based in  Landsberg am Lech, GERMANY
Especially in the field of automotive industry the application of modern particle measuring technology is essential in the domains of quality control and ...
ByPalas GmbH based in  Karlsruhe, GERMANY
Different types of filters such as fiber filters, membrane filters and fabric filters can be used to remove particles from air flow. The removal of the particles by the filter happens via different mechanism including interception, impaction, diffusion and electrostatic attraction. Typically, the effectiveness of the filter is described with a filtration efficiency value, which is the efficiency of the filter to remove particles from the air flow in percentage (0–100 %). The amount of removed particles by ...
ByDekati Ltd. based in  Kangasala, FINLAND
Dekati measurement solutions for determination of particulate emissions from engines include both particle detection and sample conditioning solutions. For non-road and off-road emission measurements, we have complete measurement solutions both upstream and downstream exhaust after-treatment devices. The exhaust sample conditions in marine and aircraft engine emission measurements may vary a lot depending on the type of engine, type of fuel and also measurement ...
ByDekati Ltd. based in  Kangasala, FINLAND
Particle Measuring Systems has put together a team of industry experts and solutions to help you better understand and meet 21 CFR Part 11. Start here by watching an on-demand webinar, reading a paper, viewing our particle counter and data management solutions, or submitting a question to our ...
ByParticle Measuring Systems (PMS) based in  Niwot, COLORADO (USA)
Particle size is a geometric characteristic that is usually assigned to material objects with sizes ranging from nanometers to millimeters. There is a wide variety of real systems that contain particles within this size range. These systems are generally polydisperse, meaning that the particles in a particular sample vary in size. Therefore, in order to adequately characterize such systems, it is not sufficient to simply determine a single particle size. We must instead determine the system’s particle size ...
ByDispersion Technology, Inc. (DTI) based in  Bedford Hills, NEW YORK (USA)
There are two papers published on subject of applicability of ultrasound for characterizing CMP slurries, see below. There are also 2 newsletters, # 1 and # 13 on the same subject. Acoustics provides accurate particle size that agrees well with independent data. It can monitor presence of 1% large particles on the background of small nano-particles. Electroacoustics yields very precise value of zeta potential. These measurements can be done with no dilution, which opens possibility for continuous on-line control ...
ByDispersion Technology, Inc. (DTI) based in  Bedford Hills, NEW YORK (USA)
Whether you are studying ambient aerosol particles or synthetic nano particles, the scientific measurement devices of Airmodus will help you reach your research ...
ByAirmodus Oy based in  Helsinki, FINLAND