Refine by
Industries served
- Chemical & Pharmaceuticals
- Manufacturing, Other
- Medical / Health Care
- Food and Beverage
- Water and Wastewater
- Agriculture
- Monitoring and Testing
- Oil, Gas & Refineries
- Energy
- Construction & Construction Materials
- Environmental
- Mining
- Waste and Recycling
- Air and Climate
- Metal
- Automobile & Ground Transport
- Commercial
- Pulp & Paper
- Aerospace & Air Transport
- Electronics and Computers
- Soil and Groundwater
- Health and Safety
- University / Academia / Research
- Defense
- Plastics & Resins
- Textile
- Paint
- Packaging
- Glassware
- Government
- Maritime/Shipbuild/Water Transport
- Communications / Telecom / Datacom
- Printing
- Travel & Leisure
- Logistics
- Forestry & Wood
- Retail
- Banking & Finance / Insurance / Legal
- Real Estate
- Dry Cleaning
- Household Appliances
- Furniture
- Leather & Tanning
- Publishing / Media / Marketing
- Domestic
Xprt Product Applications Available In Iceland
16,610 applications found
The WITec confocal Raman imaging systems are excellent analytical tools for the comprehensive investigation of geological samples, such as the identification and characterization of minerals, or in the observation of mineral phase transitions in high and ultra-high pressure/temperature experiments. With confocal Raman imaging the spatial distribution and association of components or mineral phases, or chemical variation can be observed and this information may contribute significantly to the understanding of a ...
ByWITec GmbH based in  Ulm, GERMANY
In geoenvironmental engineering, geosynthetics are widely used to contain fluids and protect the environment. Applications include lagoons for contaminated fluid, valuable process solutions, and drinking water; dams; and mining applications such as heap leach pads, tailings storage facilities where loss of fluid to surface water or groundwater must be minimized, and in capping waste rock where the ingress of water and oxygen need to be minimized to reduce generation of acid rock drainage ...
ByJinseed Geosynthetics Solution based in  Singapore, SINGAPORE
High quality, reliable observation and monitoring of remote and inhospitable environments via our ATEX and IECEx certified digital IP cameras. Within the oil and gas industries there are many hazardous processes, often in very remote locations and inhospitable environments. This is where our explosion-proof ATEX and IECEx-certified cameras come into their own as they facilitate observation and monitoring, removing the need for personnel to be on-site. Our ATEX and IECEx cameras are compliant with international ...
BySeSys Limited based in  Petersfield, UNITED KINGDOM
No matter if it’s during exploration or processing, the safe operation of oil and gas equipment depends on reliable, high-performance heating and cooling equipment. Our heat exchangers are up to the task. The biggest names in the industry depend on API Schmidt-Bretten products to perform in any and all ...
ByAPI Schmidt-Bretten GmbH & Co. KG based in  Bretten, GERMANY
Geothermal heat is an inexhaustible, constant form of energy coming from the Earth’s own molten core, and its temperature grows in direct proportion to the depth one drills below the earth’s ...
ByZuccato Energia Srl based in  Verona, ITALY
Drill Cool Systems is an integral member of the well design team. We share our extensive experience earned while operating on High Pressure High Temperature (HPHT) wells all over the ...
ByDrill Cool Systems, Inc. based in  Bakersfield, CALIFORNIA (USA)
Geothermal energy began in the United States in the early 1800’s. By the late 1920's electrical power was produced by John D. Grant at the Geysers. Fifty years later, during the oil crisis of 1979, Kern Steel Fabrication invented the Geo-Cooler to support the geothermal industry’s efforts to perform closed-loop drilling, which reduced the environmental impact of drilling. Well temperature control was needed to dissipate heat from the drilling fluid, otherwise it would accumulate heat and turn to ...
ByDrill Cool Systems, Inc. based in  Bakersfield, CALIFORNIA (USA)
The environmental benefits of geothermal installations include the use of an existing, fully sustainable resource—natural heat within the earth. A geoloop system, installed beneath the ground, is required to move the heat to and from a structure. Traditional drilling methods that require long drilling times can offset the environmental advantages of geothermal systems. The speed and efficiency of TSi Sonic Drill Rigs reduce the environmental impact of geothermal installations by using far less fuel and ...
ByTerra Sonic International, LLC based in  Marietta, OHIO (USA)
Karst structures: Solution processes are a common phenomenon in limestones and dolomites which can lead to karstification causing in many cases cavities. They can be air-filled or filled with fine-grained material, which decrease the soil stiffness and thus the load capacity. Exploratory drillings, which are generally used for soil investigations, provide only local information about the subsoil conditions and are not suitable to detect small-scaled structures in a geologically heterogeneous environment. ...
ByGeotomographie GmbH based in  Neuwied, GERMANY
At HARDAB, we are dedicated to providing the highest quality geothermal and water well-drilling rigs to meet the needs of our customers. Our drilling rigs are designed with a focus on safety, reliability, and ...
ByHardab AB based in  Forshaga, SWEDEN
All our drilling rigs are available with a wide variety of methods including for geothermal energy, water well, down-the-hole surface drilling, reverse circulation, or for surface drilling with the top hammer of choice. HARDAB offers a range of Reverse circulation (RC) drilling ...
ByHardab AB based in  Forshaga, SWEDEN
GasClam enables continuous monitoring of active and non-active coal seam gas (coal bed methane) and shale gas ...
BySalamander Group based in  Ulverston, UNITED KINGDOM
Located miles off the coastline, offshore platforms are huge steel structures equipped with the resources to drill wells and extract oil and natural gas from the ocean floor. Offshore platforms may be floating or fixed, and they contain facilities to store and process oil and gas, as well as pipeline systems that connect the wells to these storage and processing components. Offshore platforms are continuously threatened by corrosive forces. The rate of corrosion in marine environments can be accelerated by ...
ByMobiltex Data Ltd. based in  Calgary, ALBERTA (CANADA)
Trimax can help your operation meet the challenges of new technology implementation, process efficiency, and cost-reducing automation. Our team has certifications and training to upgrade mission-critical processes in hazardous conditions We understand the need for minimized downtime, redundant systems, and exacting safety and quality control ...
ByTrimax Systems Inc (TSI) based in  Brea, CALIFORNIA (USA)
Mining is a high-impact industry that has effects on the environment, local communities, workers and the economy. That is why it is important mine sites are well researched and decisions about drilling are data-driven. GPR can be the enabling factor in sustainable mining ...
ByOerad Tech Ltd based in  Plovdiv, BULGARIA
On-the-spot measurement of total microorganisms! Microbial growth can be a significant nuisance in the upstream oil and gas sector. Well drilling, completion and stimulation activities can introduce microbes into a producing formation. Microbes found in the near well bore of producing wells can impede inflow, corrode tubulars and pumps and sour the formation. At the surface, production problems associated with microbial infection include corrosion and fouling of wellheads, pipelines, heater treaters, separators ...
ByLuminUltra Technologies Ltd. based in  Fredericton, NEW BRUNSWICK (CANADA)
For years, petroleum companies have used Esri's GIS to decide where to drill a well, route a pipeline, build a refinery, and reclaim a site. Today's GIS provides oil and gas industry solutions throughout the petroleum life cycle. All major oil companies in the world use Esri's GIS technology to manage their location-based information, from leases, wells, and pipelines to environmental sites, facilities, and retail ...
ByEsri based in  Redlands, CALIFORNIA (USA)
PROJECT OVERVIEW: The re-lining of 12 seawater supply wells to a depth of 45 metres with Boode Select PVC screen and casing. The supply wells support an offshore oil drilling and production platform and were re-lined following the failure of existing stainless steel screen and casing due to sand ingress and corrosion. ...
ByBoode Waterwell Systems based in  Zevenhuizen, NETHERLANDS
PROJECT OVERVIEW: The iconic Markthal in Rotterdam. Supply of unique 0.4mm vertical slot PVC screen for the Aquifer Thermal Storage Energy system at Markthal, a 95,000m2 residential and commercial building with an indoor market hall. ...
ByBoode Waterwell Systems based in  Zevenhuizen, NETHERLANDS
AMS, Inc. has been a leading provider of high quality sampling equipment since 1942. AMS sampling equipment is primarily used for environmental, geotechnical, and remediation uses as well as soil, soil gas, and groundwater monitoring. In addition, AMS makes PowerProbe direct push/hollowstem auger drill rigs for environmental and geotechnical drilling activities. AMS also manufactures and offers direct push tooling, drilling equipment, accessories, and expendables for soil sampling, groundwater sampling and ...
ByAMS, Inc. based in  American Falls, IDAHO (USA)