Refine by
Industries served
- Chemical & Pharmaceuticals
- Manufacturing, Other
- Medical / Health Care
- Food and Beverage
- Water and Wastewater
- Agriculture
- Monitoring and Testing
- Oil, Gas & Refineries
- Energy
- Construction & Construction Materials
- Environmental
- Mining
- Waste and Recycling
- Air and Climate
- Metal
- Automobile & Ground Transport
- Commercial
- Pulp & Paper
- Aerospace & Air Transport
- Electronics and Computers
- Soil and Groundwater
- Health and Safety
- University / Academia / Research
- Defense
- Plastics & Resins
- Textile
- Paint
- Packaging
- Glassware
- Government
- Maritime/Shipbuild/Water Transport
- Communications / Telecom / Datacom
- Printing
- Travel & Leisure
- Logistics
- Forestry & Wood
- Retail
- Banking & Finance / Insurance / Legal
- Real Estate
- Dry Cleaning
- Household Appliances
- Furniture
- Leather & Tanning
- Publishing / Media / Marketing
- Domestic
Xprt Product Applications Available In Malta
16,579 applications found
In pilot plant and production scale fermentors, information relating to yield of product is of high importance. Hiden's gas analysers are configured with a multiport Off-Gas analysis manifold enabling simultaneous sampling from multiple fermentors. Data is used for the calculation of the respiratory quotient, carbon production rate and oxygen uptake rate. The Off-Gas measurement provides the respiratory quotient in a time and space averaged form and with good response time. By comparison data from multiple ...
ByHiden Analytical Ltd. based in Warrington, UNITED KINGDOM
In pilot plant and production scale fermentors, information relating to yield of product is of high importance. Hiden's gas analysers are configured with a multiport Off-Gas analysis manifold enabling simultaneous sampling from multiple fermentors. Data is used for the calculation of the respiratory quotient, carbon production rate and oxygen uptake rate. The Off-Gas measurement provides the respiratory quotient in a time and space averaged form and with good response time. By comparison data from multiple ...
ByHiden Analytical Ltd. based in Warrington, UNITED KINGDOM
There are a number of factors that affect the capacity and operation of a typical amine system. Solid or liquid contaminants in the system may cause foaming. The presence of foaming is typically addressed by the addition of expensive antifoam chemicals and/or by reducing the operating capacity of the amine system. In addition to this, the presence of contaminants in the system can foul heat exchangers and column packing or trays. These solid and liquid contaminants are either ingressed into the system with the ...
ByPentair Filtration Solutions, LLC based in Conroe, TEXAS (USA)
Proper fluid and proppant placement are critical to a successful propped fracture stimulation treatment. Despite effective placement of the treatment, well performance is often detrimentally affected by incomplete gel breaking and fluid ...
ByPentair Filtration Solutions, LLC based in Conroe, TEXAS (USA)
Chlorine dioxide is a well-known disinfectant for drinking water with many advantages over chlorination. Today there are estimated to be over 900 public water systems using chlorine dioxide for water disinfection world-wide. Also in Australia it is approved for a wide range of uses. However, the acceptance of chlorine dioxide in Australia as a disinfecting agent for drinking water has been hampered by the crude methods available for generating chlorine dioxide – methods that require relatively complex ...
ByNatural Water Solutions based in Perth, AUSTRALIA
Dissolved Gas Analysis is a method of monitoring the condition of electrical transformers and related oil filled equipment. The oil used in transformers as coolant and insulator has gases dissolved in it due to aging and faults inside the transformer. Different faults in transformers create fault gases of different kind, for example CO, CO2, CH4, C2H6, C2H4, and C2H2. The extraction and analysis of these gases gives highly reliable early indication of transformer ...
ByGasera Ltd based in Turku, FINLAND
Glycol dehydration is a liquid desiccant system for the removal of water from natural gas and natural gas liquids (NGL). It is the most common and economic means of water removal from these streams.Glycols typically seen in industry include triethylene glycol (TEG), diethylene glycol (DEG), ethylene glycol (MEG), and tetraethylene glycol (TREG). TEG is the most commonly used glycol in ...
ByPentair Filtration Solutions, LLC based in Conroe, TEXAS (USA)
Hydrocarbons in the sour water system are typically present on a continuous basis at up to 10,000 ppm and during upsets to levels greater than 50,000 ppm. As little as 5,000 ppm Cat Naphtha lost to the sour water system from an FCC main fractionator overhead accumulator operating at 100 gpm water represents 262,800 gallons of potential product gasoline lost per year, with a recoverable product value greater than ...
ByPentair Filtration Solutions, LLC based in Conroe, TEXAS (USA)
In the semiconductor manufacture and in pharmaceutical, contamination is the enemy. Even minute (ppm or ppb) levels of contamination can cause failure or malfunction in sensitive equipment. That is why GCARBON is known for the best-in-the-industry activated carbon for producing ultra pure water. Our products are used in a chain of applications designed to produce ‘Ultra Pure’ water, by removing NOC’s, organic compounds, dissolved ions and dissolved gases from water, required in the production of ...
ByGowrishankar Chemicals Pvt Ltd based in Tumkur, INDIA
Dissolved gas analysis has been performed using a simplified headspace method following US EPA method RSKSOP-175. This method describes the preparation and analysis of dissolved gases in water. Recent developments in natural gas drilling from deep ...
BySCION Instruments BV - Techcomp Group based in GP Goes, NETHERLANDS
Samoa Pivot Series double diaphragm pumps decreased production costs by improving time between services in a sludge transfer application. ...
BySamoa Industrial based in Gijón, SPAIN
Largest roof tile manufacturer in Sweden switches to Samoa Pivot Series 2” diaphragm pumps for feeding coloring ...
BySamoa Industrial based in Gijón, SPAIN
Pressure systems are water supply units that allow public and private water facilities to meet their daily water requirements, maintaining constant pressure in every situation. Pressure systems consist of one or more pumps and are generally applied to all automatic water-supply voltages. Depending on the specific situation, Soggia Water Pumps will be able to recommend the best products to create efficient and flexible pressurisation systems, using fixed or variable speed sets. A true point of reference for pumps ...
BySoggia Srl based in Montegrotto Terme, ITALY
One of the greatest problems facing the planet is the management, conservation and equitable distribution of fresh water supplies. The fresh water sources may be lakes, rivers or ground water aquifers, most of which are now under ...
ByHeron Instruments Inc. based in Dundas, ONTARIO (CANADA)
Agriculture is by far the largest water use at global level. Irrigation of agricultural lands accounted for 70% of the water used worldwide. In several developing countries, irrigation represents up to 95% of all water uses, and plays a major role in food production and food security. Future agricultural development strategies of most of these countries depend on the possibility to maintain, improve and expand irrigated ...
ByLenntech Water Treatment based in Delfgauw, NETHERLANDS
ByZZ Resistivity Imaging Pty. Ltd. based in Maylands, AUSTRALIA
Municipalities are required to treat the accrued wastewaters according to resource conservation guidelines. DAS Environmental Expert supports you by developing optimum solutions for wastewater treatment that are based on holistic ...
ByDAS Environmental Expert GmbH based in Dresden, GERMANY
Water agencies and private water companies are tasked with the challenge of developing and maintaining sustainable water supplies, often centered on groundwater. Since 1987, the Westbay System has provided water managers with the flexibility to characterize groundwater in four-dimensions, leading to the optimization of management activities and the development of sustainable management ...
ByWestbay Instruments - part of Nova Metrix LLC based in Burnaby, BRITISH COLUMBIA (CANADA)
Water is one of the most important raw materials for industrial production. For this reason, processes are now used in water treatment that not only produce the required water quality, but also allow for recycling. The treated water can either be fed back into the process, or reused for other purposes. Water recycling plants lead to a significant reduction in operational costs for ...
ByEnviroChemie GmbH - part of the EnviroWater Group based in Rossdorf bei Darmstadt, GERMANY
Tracking the tiniest cracks – with H2O wastewater treatment. Heavy use, material fatigue and material faults can cause tiny cracks in plastic and metal parts. These are so small that they are invisible to the naked eye. But they can still be relevant to safety, e.g. on the wings of passenger jets. That’s why these parts are regularly checked for micro cracks. One way of doing this is the dye penetration process, where the part to be checked is first thoroughly cleaned. Applying a special dye and using ...
ByH2O GmbH based in Steinen, GERMANY