Refine by
Industries served
- Chemical & Pharmaceuticals
- Manufacturing, Other
- Medical / Health Care
- Water and Wastewater
- Agriculture
- Monitoring and Testing
- Oil, Gas & Refineries
- Food and Beverage
- Energy
- Construction & Construction Materials
- Mining
- Environmental
- Waste and Recycling
- Air and Climate
- Metal
- Automobile & Ground Transport
- Commercial
- Pulp & Paper
- Aerospace & Air Transport
- Electronics and Computers
- Soil and Groundwater
- Health and Safety
- University / Academia / Research
- Defense
- Plastics & Resins
- Textile
- Paint
- Government
- Glassware
- Packaging
- Maritime/Shipbuild/Water Transport
- Communications / Telecom / Datacom
- Printing
- Travel & Leisure
- Logistics
- Forestry & Wood
- Retail
- Banking & Finance / Insurance / Legal
- Dry Cleaning
- Real Estate
- Household Appliances
- Leather & Tanning
- Furniture
- Publishing / Media / Marketing
- Domestic
Xprt Product Applications Available In Mongolia
15,581 applications found
P-80 Lubricants are used in the manufacturing and repair and maintenance of heavy-duty construction vehicles. Rubber assembly applications include bushings, leaf springs, chassis, and suspension components. P-80 Lubricants provide temporary lubrication to rubber or soft plastic ...
ByInternational Products Corporation based in  Burlington, NEW JERSEY (USA)
The boat, marine engine and accessory industry relies heavily on natural and synthetic rubber for various purposes including engines, propeller hubs, pumps, hoses, seals, O-rings and grommets. Due to the slip resistant nature of rubber, it is relatively difficult to install, remove or manipulate. P-80® Lubricants provide a safe and easy way to improve assembly operations of rubber and soft plastic ...
ByInternational Products Corporation based in  Burlington, NEW JERSEY (USA)
The transportation industry relies heavily on natural and synthetic rubber for various purposes including chassis, engine and suspension components. Additional rubber assembly applications include mounts, seals, belts, bushings, O-rings, grommets, grips, insulators, tires, wire harnesses, hoses, and other powertrain components and subsystem assemblies. Due to the slip resistant nature of rubber, it is relatively difficult to install, remove or manipulate. P-80® Lubricants provide a safe and easy way to improve ...
ByInternational Products Corporation based in  Burlington, NEW JERSEY (USA)
P-80 Lubricants are the perfect solution for pump and seal repairs. They have been used for years by pump manufacturers, HVAC companies, pool & spa manufacturers, treatment plant operators and maintenance professionals to maintain equipment and replace parts such as seals, O-rings, hoses, grommets, and ...
ByInternational Products Corporation based in  Burlington, NEW JERSEY (USA)
Biochar is formed through the carbonisation of organic matter. Biochar can be used in many different ways. The decisive factor is always which quality criteria have to be met. Carbonisation – the conversion of organic material to biochar – is a process that has been known and practised for many centuries. However, only the state-of-the-art PYREG process can control the process parameters in such a way that biochar can be produced in different quality levels and nutrients can be gently recovered. ...
ByPyreg GmbH based in  Dörth, GERMANY
We believe in the use and responsible waste management of glass, and therefore we are keen to see glass products recycled. Recycling glass reduces the need for raw materials, cuts greenhouse gas emissions and saves energy associated with producing comparative new ...
ByGGR Technologies P/L based in  Osborne Park, AUSTRALIA
PRP (Petroleum Remediation Product) can help absorb and remediate oil, fuel and other liquid petroleum hydrocarbons which may be carried along with water, potentially leading to stormwater runoff areas and stormwater systems. Below are a few examples where PRP has worked to cleanup oil and fuel in stormwater ...
ByUnited Remediation Technology, LLC based in  Pittsburgh, PENNSYLVANIA (USA)
Problem: Ground contamination created by engines idling in rail yards at the hump area or in maintenance areas. The current method of retaining the contaminants is through the use of Track Mat, which is costly, time consuming and not environmentally friendly. Track Mats are a short-term fix as they are limited in the amount of oil/grease they can absorb and eventually the excess oil or grease sinks into the ballast. In addition, there is a large cost to dispose of used Track ...
ByUnited Remediation Technology, LLC based in  Pittsburgh, PENNSYLVANIA (USA)
Refuse derived fuel (RDF)is made from residual Municipal Solid Waste and includes biodegradable waste products such as paper and card as well as plastics. It has a lower calorific value than solid recovered fuel (SRF). RDF is used in combined heat and power facilities. Solid recovered fuel (SRF) is produced from commercial waste and includes paper, card, wood, textiles and plastic. It is typically shredded to < 30mm and treated to reduce the moisture content. Solid recovered fuel has a high calorific value and ...
ByKiverco Ltd. based in  Dungannon, NORTHERN IRELAND
Anaerobic biodegradation tests – often referred to as Biochemical Methane Production (BMP) tests – involve addition of known amounts of a chemical or wastewater to anaerobic cultures. The quantity of methane production – relative to that from a control – indicates the biodegradation potential. This case study shows methane production for a Control reactor and three test reactors that were operated at 20-, 30- and 45-day retention times and received three doses of industrial wastewater. The ...
ByRespirometer Systems and Applications, LLC (RSA) based in  Fayetteville, ARKANSAS (USA)
The pattern of oxygen uptake– relative to that for a control substrate – gives a measure of the rate and extent of biodegradation of the organic constituents of the test sample. In this case, samples #2 and #3 showed a much lower biodegradation rate than the ...
ByRespirometer Systems and Applications, LLC (RSA) based in  Fayetteville, ARKANSAS (USA)
MicroMix - A smarter approach for bioremediation & odor control. Rapid On-Site Remediation of soil and media contaminated with petrochemical, and hydrocarbons is the most cost effective means of dealing with contamination. Micronomix USA has developed a simple yet highly effective in-situ remediation technology that helps companies deal efficiently with contaminated soils and/or oil spills. Upon application, MicroMix Aqua immediately starts to attack the hydrocarbons and converts them into humus thereby ...
ByMicronomix, LLC based in  Ocala, FLORIDA (USA)
Travel in comfort. We protect passengers from unwanted odors and irritating exhaust while creating a pleasant, comfortable, and healthier transportation ...
ByPurafil, Inc. - Filtration Group based in  Doraville, GEORGIA (US) (USA)
Instrument for biodegradability analyses. The degradation of biodegradable polymers and biodegradable plastics crucially depends on the environments they may end up in, such as soil, fresh or marine water, landfill or composting site. Owing to the great variations in natural conditions, several tests are needed to determine the fate of a polymer material in real life and to study its biodegradability in different environments. In aerobic environments, the biodegradability is usually determined by measuring ...
ByBPC Instruments AB based in  Lund, SWEDEN
Wastewater generated from food processing facilities has characteristics that set it apart from other types of wastewater. Fruit and vegetable wastewater is nontoxic and biodegradable, but has very high concentrations of BOD and TSS. Wastewater in meat, poultry and fish processing facilities contain high amounts of fat, oil and grease (FOG). Some facilities require large volumes of high quality water. ...
BySalsnes Filter based in  Namsos, NORWAY
Chemicals for Biodegradable Water industry - Water and Wastewater. ...
Byltalmatch Chemicals Group based in  Genova, ITALY
Biological decomposition processes for organic waste can be speeded up through enhanced biological activity with a timed control of temperature and oxygen concentration. This gives rise to various emissions depending on the waste characteristic one has and the stage of ...
ByAir Clean s.r.l. based in  Trezzano sul, ITALY
Plastics can be produced using a variety of methods. Nitrogen plays an important role in these methods. With the aid of nitrogen, cycle times in production can be reduced and product quality can be improved. Moreover, the environmental compatibility of plastics can be increased by adding ...
ByInmatec GaseTechnologie GmbH & Co. KG based in  Herrsching, GERMANY
In the process of machining, the effluent discharged includes cooling fluid, organic cleaning fluid, spray paint wastewater and electro - spark working fluid and other wastewater. The amount of waste water is small but the concentration of organic matter is high. Among them, CODCr of cooling liquid reaches up to 50000 ~ 300000mg/L. If it is discharged directly, it will cause serious pollution to the ...
ByShanghai Techase Environment Protection Co., Ltd based in  , CHINA
GCARBON has produced a range of products to effectively remove a wide range of contaminants from industrial waste water specializing in applications such as Process Effluent, Washing Effluent, Swimming Pools & Aquariums, Boiler Condensate, Ground Water Remediation and Mercury Removal. Among the wide range of physical, chemical and biological processes used in waste water treatment, activated carbon adsorption is a primary method and is especially advisable in cases requiring the removal of toxic substances or ...
ByGowrishankar Chemicals Pvt Ltd based in  Tumkur, INDIA