Refine by
Industries served
- Chemical & Pharmaceuticals
- Manufacturing, Other
- Medical / Health Care
- Water and Wastewater
- Agriculture
- Monitoring and Testing
- Oil, Gas & Refineries
- Food and Beverage
- Energy
- Construction & Construction Materials
- Mining
- Environmental
- Waste and Recycling
- Air and Climate
- Metal
- Automobile & Ground Transport
- Commercial
- Pulp & Paper
- Aerospace & Air Transport
- Electronics and Computers
- Soil and Groundwater
- Health and Safety
- University / Academia / Research
- Defense
- Plastics & Resins
- Textile
- Paint
- Government
- Glassware
- Packaging
- Maritime/Shipbuild/Water Transport
- Communications / Telecom / Datacom
- Printing
- Travel & Leisure
- Logistics
- Forestry & Wood
- Retail
- Banking & Finance / Insurance / Legal
- Real Estate
- Dry Cleaning
- Household Appliances
- Furniture
- Leather & Tanning
- Publishing / Media / Marketing
- Domestic
Xprt Product Applications Available In Morocco
15,275 applications found
Natural property of viscosity and thixotropic in bentonite makes suitable to use for paper processing to avoid agglomeration in particle distribution. Ultra fine bentonite powder under stringent quality controls having lowest sand content improves paper quality and develops good paper pulp. Being good filtering agent it helps to drain ...
ByPratham Minechem based in  Bhuj Kutch, INDIA
PTR-MS for ultra-sensitive real-time monitoring of air pollutants. IONICON PTR-MS systems are well established tools in environmental research. Their fast response-times and ultra-low detection limits help researchers all over the planet to better understand the world we live in. ...
ByIonicon Analytik Ges.m.b.H. based in  Innsbruck, AUSTRIA
To protect humans and the environment from damage by air pollution, it is of the utmost importance to measure the levels of pollutants in the air. Real time monitoring of dangerous gases is particularly interesting in hazardous areas, as the conditions can change dramatically very quickly, with serious consequences. ADVANTICSYS employs its knowledge in wireless sensor networks to develop customized solutions for our ...
ByAdvantic Sistemas y Servicios S.L based in  Madrid, SPAIN
ByExposmeter AB based in  Tavelsjö, SWEDEN
ByAdvanced Technical Services GmbH (ATS) based in  Zug, SWITZERLAND
With the advent of specific process emission limits being defined, continuous particulate monitoring has become a regulatory requirement for many industries. smoke stack #1Particulate monitoring requires the measurement of the mass concentration of particulate matter in stack emissions to atmosphere. There is no known method of continuously measuring particulate concentration by direct measurement and therefore, all continuous particulate measurement methods are inferential. Each method involves the ...
ByDynoptic Systems Ltd - ACOEM Group based in  Banbury, UNITED KINGDOM
The reasons for testing water quality in groundwater are numerous. Monitoring water quality and conducting tests is a good way to gather data on aquifer hydraulics. It can also be used to monitor parameters such as rhodamine, which helps to understand movement of underground water. Human activities can have an impact on groundwater quality, and conducting tests in this field can help to track these effects. Leachate from landfill and fertiliser can both find their way into groundwater. It is important to monitor ...
ByAquaread Ltd, Part of the NKE Group based in  Broadstairs, UNITED KINGDOM
PeCOD Analyzer Improves Pulp Mill Performance, Reduces Wastewater Pollution. MANTECH’s PeCOD technology is a safe and effective solution for improving wastewater treatment and optimizing the use of chemicals in pulp and paper ...
ByMANTECH Inc. based in  Guelph, ONTARIO (CANADA)
Aerosol LIDARs can provide visibility measurement, including Slant Visual Range (SVR - visibility up the glide slope), Runway Visual Range (RVR), and Vertical Optical Range (VOR - visibility at the decision point). LIDARs offer remote detection, augmenting current sensors wherever visibility is an issue, including for airports, ports, and oil platforms. Using the same principle, they are also capable of detecting incoming ...
ByRaymetrics S.A. based in  Athens, GREECE
Continuous Emissions Monitoring Systems (CEMS) are used to measure flue gases from stationary sources at a wide variety of regulated industrial facilities, including power plants, petroleum refineries, petrochemical plants, waste incinerators, pulp and paper producers, and many others. The types of air pollution measured from these sources vary widely based on the industry and process, and many are regulated by government agencies around the ...
ByTeledyne API based in  San Diego, CALIFORNIA (USA)
Many large combustion plants are now required to monitor mass emissions of major pollutants and to do so requires an accurate measurement of stack gas velocity. The VCEM 5100 is certified to EN 15267 part 3 QAL 1 for all industrial processes including waste incineration. It has several key advantages, firstly the sensors optics are not in contact with the hot and dusty environment, the VCEM 5100 can monitor gases at temperatures exceeding 10000C and the analyser requires minimal maintenance. The VCEM 5100 can be ...
ByCodel - a Forbes Marshall company based in  Bakewell, UNITED KINGDOM
The TunnelTech 200 series are primarily gas monitors with optional Visibility capability. Most use Infra-red absorption technology to monitor gaseous pollutants and those with a visibility channel use optical attenuation for that application. All TunnelTech 200 analysers except the TunnelTech 205 use the same rugged corrosion resistant enclosures and have an optional Data Display unit. As there is only one moving part so reliability levels are very high and maintenance levels very ...
ByCodel - a Forbes Marshall company based in  Bakewell, UNITED KINGDOM
In some countries they do not allow tunnel atmosphere monitors to be mounted on the tunnel wall; also, where there is a single bore it is very difficult to gain access for maintenance purposes. The TunnelTech 400 series are extractive gaseous pollutant and visibility monitors and extract a gas and dust sample from the tunnel bore and carry to a remote analyser. This allows maintenance to take place without affecting tunnel traffic ...
ByCodel - a Forbes Marshall company based in  Bakewell, UNITED KINGDOM
Analytical instrumentation for the emission monitoring industry. Criteria emission monitoring, explosion area emission monitoring, incineration emission ...
ByFocused Photonics Inc. (FPI) based in  Hangzhou, CHINA
There are strict regulations in place surrounding waste water, which makes it very important to monitor. Even small changes in aquatic ecosystems can have a huge impact in the chemical makeup of water, temperature, etc. By using real time monitoring on water quality, pollutants can be detected and mitigated before they pose a potential threat to these ecosystems and enter the water course. The rugged AP-2000 allows for real time testing of wastewater and helps to minimise risk of any potential fines. It is works ...
ByAquaread Ltd, Part of the NKE Group based in  Broadstairs, UNITED KINGDOM
Stack emissions testing (stack sampling or stack monitoring) is the experimental process for evaluating the characteristics of waste gas stream emissions into the atmosphere from industrial facilities to meet environmental standards. Stack testing measures the amount of specific regulated pollutants or surrogates being emitted or determines the destruction or removal efficiency of a control device used to reduce emissions at facilities. Stack monitoring is an important tool used to determine a facility’s ...
ByOnline Safety Services (Europe) Ltd based in  Staffordshire, UNITED KINGDOM
Proteus instruments has a range of sensors for organic pollution monitoring in natural river systems. The Proteus provides a robust indication of human and animal waste inputs into river networks. The sensor is suitable for both fixed point monitoring, providing information on event dynamics or intermittent pollution sources, and catchment wide spot sampling. The highly accurate, conventional parameter outputs (i.e. BOD, COD) alongside environmental fluorescence outputs make the Proteus ideal for river basin ...
ByProteus Instruments based in  Harris Business Park, UNITED KINGDOM
The World Health Organization states that “past experience has shown that remedial actions to clean up polluted sites and water bodies are generally much more expensive than applying measures to prevent pollution from occurring.” While government policies and regulations are the most cost-effective means of preventing water pollution before it occurs, water quality sensors are needed to enforce these policies and catch pollution before it causes significant harm to the environment. To do that, a ...
BypHionics Inc. based in  Carson City, NEVADA (USA)
Modern Water offers the Microtox technology for assessing industrial pre-treatment. Regulatory compliance guides the testing performed within most wastewater facilities to help understand the process of the plant affects the final effluent stream being released into a sewer system, a secondary treatment system, river or other body of ...
ByModern Water based in  Sand Hutton, UNITED KINGDOM
Air quality monitoring may involve measuring particle mass (PM), particle number concentrations (PN), particle size, or collecting particles for later chemical analysis. Air quality monitoring efforts are usually driven by governmental regulation, but may also be motivated by a neighborhood concern or scientific interest. These measurements are performed by researchers in industries or institutions, but they may also be performed by local advocacy groups. When combined with other information (such as weather data, ...
ByTSI Incorporated based in  Shoreview, MINNESOTA (USA)