Refine by
Industries served
- Chemical & Pharmaceuticals
- Manufacturing, Other
- Medical / Health Care
- Water and Wastewater
- Agriculture
- Monitoring and Testing
- Oil, Gas & Refineries
- Food and Beverage
- Energy
- Construction & Construction Materials
- Mining
- Environmental
- Waste and Recycling
- Air and Climate
- Metal
- Automobile & Ground Transport
- Commercial
- Pulp & Paper
- Aerospace & Air Transport
- Electronics and Computers
- Soil and Groundwater
- Health and Safety
- University / Academia / Research
- Defense
- Plastics & Resins
- Textile
- Paint
- Government
- Glassware
- Packaging
- Communications / Telecom / Datacom
- Maritime/Shipbuild/Water Transport
- Printing
- Travel & Leisure
- Forestry & Wood
- Logistics
- Retail
- Banking & Finance / Insurance / Legal
- Real Estate
- Dry Cleaning
- Furniture
- Household Appliances
- Leather & Tanning
- Publishing / Media / Marketing
- Domestic
Xprt Product Applications Available In Namibia
15,195 applications found
ByAMETEK Process Instruments based in Pittsburgh, PENNSYLVANIA (USA)
IONICON PTR-MS systems can analyze trace gas concentrations of volatile metabolites in the off-gas of bio-pharmaceutical fermentations in real-time. This highly relevant process related information can be used for on-line process monitoring and process ...
ByIonicon Analytik Ges.m.b.H. based in Innsbruck, AUSTRIA
Water is essential for all life on earth. Hydroisotop understands its role to protect it and to make it useable for the people. We distinguish between four types of ...
ByHydroisotop GmbH based in Schweitenkirchen, GERMANY
For characterization and remediation of contaminated soils, sediments, and sludges, energy dispersive X-ray fluorescence (EDXRF) analysis provides quick and reliable assays. EDXRF is a standard technique recognized by the U.S. EPA and is routinely employed to determine heavy metal concentrations (RCRA metals) in soils and sediments. In addition to soils, the NEX CG II analyzer may used with the Rigaku Ultra Carry technique to quantify trace metals in aqueous (water) samples down to part-per-billion levels. ...
ByApplied Rigaku Technologies based in Cedar Park, TEXAS (USA)
Introduction: Chlorodimethylether (CMME) and Bis Chloromethyl-ether (BCME) as well as Ethylene dichloride (EDC) and Methylene chloride (DCM) are well known as carcinogenic substances, like other chlorinated hydrocarbons. BCME is also very toxic. These particular chemicals are widely used in the world of chemical industry, especially in the production process for ion exchange resins. CMME in that case acts as a precursor for those resins while BCME is generated as an impurity which cannot be ...
ByIUT Technologies GmbH based in Berlin, GERMANY
Introduction: DMS (Dimethylsulfate) is a liquid compound with a high vapor pressure. It is a widely used basic chemical in the production of Agrochemicals, Cosmetics and Pharmaceutics. It is very toxic at ppb- concentrations already, but also carcinogenic and mutagenic. Furthermore by hydrolysis sulfuric acid is formed, so it is very corrosive also. Since there’s no warning effect in terms of irritation and/ or odor, dangerous amounts can be incorporated without realizing. The effects of intoxication, which ...
ByIUT Technologies GmbH based in Berlin, GERMANY
Introduction: Ethylene oxide is a highly flammable and toxic gas which is the main precursor in the production of Ethylene glycol but also widely used in the medical sterilization. The Ethylene oxide sterilization is applied on medical and pharmaceutical products which cannot resist the high temperature ranges in usual steam sterilization processes. Certain products in the food industry are sterilized in the same way. Ethylene oxide gas penetrates the packaging as well as the product and kills all microorganisms ...
ByIUT Technologies GmbH based in Berlin, GERMANY
SCION Instruments offers the solution for trace impurities in monocyclic aromatic hydrocarbons by gas chromatography and effective carbon number. After manufacturing products might contain impurities. The ASTM D7504 describes the determination of total ...
BySCION Instruments BV - Techcomp Group based in GP Goes, NETHERLANDS
On-the-spot measurement of total microorganisms! fuel1Microbial growth in liquid hydrocarbon fuels and lubricants presents a major problem. Storage tanks, delivery systems, and filters can become fouled through microbial proliferation and metabolic activity, which results in a myriad of problems, including reduced product quality, storage system corrosion, and filter plugging. The best solution to this problem is early detection and ...
ByLuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA)
The economic advantage of continuous discharge could only be achieved at this location by meeting strict discharge limits for the level of hydrocarbons present in the discharged water. Local ordinances required continuous monitoring for continuous discharge of the company’s treated ...
ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in Edmonton, ALBERTA (CANADA)
The Situation: A major pipeline company has large storage tank farms throughout the Western States. The pipeline company transports, stores, blends additives, and distributes gasoline, diesel, and jet fuel to retail service stations and airports. Due to the quantity and movement of fuel at these facilities, there is always the potential for fuel spills. These facilities prevent out of compliance discharge by capturing all stormwater in storm drains, which is then sent to treatment systems prior to discharge. At ...
ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in Edmonton, ALBERTA (CANADA)
Optical instruments called fluorometers can very easily detect and measure dissolved petroleum hydrocarbons in water, and at very low concentrations. As shown in the study below, TD-4100 series monitors are able to measure xylene continuously over four consecutive weeks with a direct correlation coefficient of 0.9967 compared to GC grab sample ...
ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in Edmonton, ALBERTA (CANADA)
Sitelab's UVF-Trilogy analyzer, model no. 7200-004-TPH, includes TPHOIL UV module used to detect total petroleum hydrocarbons in the C15 to C50 "Oil and Grease" range. The analyzer is factory calibrated using Sitelab's TPH-Oil calibration kits for testing low and high concentrations of hydrocarbons in soil or water. This test matches well to U.S. EPA 1664, 9071B and similar gravimetric methods for oil in water, oil in soil applications. ...
BySitelab Corporation based in West Newbury, MASSACHUSETTS (USA)
The Situation: Refineries use a significant amount of steam in the process of distilling gasoline, diesel and other hydrocarbon products. The refinery design will collect and return as much steam as possible to save on energy, water consumption and sewering costs. For some refineries 50% of the steam can be recovered. Because the return steam can be contaminated by hydrocarbon leaks in the heat exchangers, refineries often will install a monitoring system to alert operators when a hydrocarbon leak has ...
ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in Edmonton, ALBERTA (CANADA)
Power plants, paper and steel mills and other industries with rotating equipment often use recirculated water for the cooling of lubricating, hydraulic, turbine and transformer oil. If an oil cooler leaks, the loss of oil can cause significant damage to the pumps, compressors and motors. High oil & grease water discharge test results can be caused by oil contamination. In some cases, air quality issues can also occur. A UV fluorescence oil in water monitor from Turner Designs Hydrocarbon Instruments can ...
ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in Edmonton, ALBERTA (CANADA)
The Situation: A wastewater treatment company operated an oil/water separation facility on a multi-acre industrial site in Northern California. Its purpose was to recycle oil products for profit while at the same time providing a wastewater treatment service for industries based in Northern California. The oily water mixes processed by the company were obtained from tanker bilges, contaminated rainwater runoff, truck spills, oil spills into waterways, crankcase drain oils, hydraulic oils and industrial lubricants, ...
ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in Edmonton, ALBERTA (CANADA)
Introduction: Ammonia (NH3) is a well-known, widely spread air pollutant, which is present almost everywhere in low ppm/ppb concentrations. So this chemical can be found in various processes, where gases are the basic media, such as steam crackers producing gaseous hydrocarbons for further production steps like polymerization. Gases like this are for example Ethylene, Propylene and even so called cracker gas, which is mostly a mixture of above mentioned gases as well as Water and Hydrogen. The gases of interest ...
ByIUT Technologies GmbH based in Berlin, GERMANY
It is predicted that the global electricity demand will double in the next 20 years. A large amount of water is consumed in electricity production and it is estimated that the amount of water to be used in these 20 years, when the electricity demand will increase, will be 3 times more. Due to the limited water resources in the world, it may cause great limitations in the progress and profitability of the sector. Today, with the increasing population, energy consumption has also increased. The energy sector is an ...
ByZetaş Kimya based in Ostim OSB/Yenimahalle, TURKEY
In this period when people work intensively, there is always an increase in laundry and dry cleaning services. Laundry and Dry Cleaning Systems, which will enable you to reach the required capacity and serve people in a cleaner, higher quality and faster way, will help you to ensure that the water you need to draw into your machines is always clean and does not damage the clothes. ...
ByZetaş Kimya based in Ostim OSB/Yenimahalle, TURKEY
Purification of wastewater; Mineral processing plants usually use nearby ground (well water) water. The structural properties of these waters play an important role in processes such as mine separation and enrichment. When the chemicals used in these facilities are mixed with water, purified water is used to maximize the effect. ...
ByZetaş Kimya based in Ostim OSB/Yenimahalle, TURKEY