- Home
- Applications
- portugal
- oxidizing biocide
Show results for
Refine by
Oxidizing Biocide Product Applications Available In Portugal
10 applications found
AMSA BCP chemistry when used with an oxidizing biocide provides a Legionella Control Program. Outbreaks in Legionnaires’ Disease such as the one in the South Bronx in August 2015 highlights the importance of having an effective Legionella Control Program. Legionella bacteria grow in biofilms in building water systems, where they are protected from the disinfecting action of oxidizing and non-oxidizing ...
ByAMSA, Inc. based in Auburn, MICHIGAN (USA)
The presence of microorganisms will cause the system to breakdown and decreases the efficiency of the heat transfer. Typically oxidizing biocides such as chlorine and bromine have been used to treat cooling water. ...
ByApplied Oxidation LLC based in Chattanooga, TENNESSEE (USA)
The treatment of cooling towers with ozone is not only good for the environment but also good for the bottom line. Ozone, a powerful biocide and oxidant , affords several advantages over the traditional chemical treatment of cooling towers, ...
ByChemtronics Technologies (India) Pvt. Ltd. based in Mumbai, INDIA
Wondering how to reduce TOC? How to oxidize organic load? How to lower THMs? HAA5?. How to reduce disinfection by-products? ...
ByEnvirocleen LLC based in Libertyville, ILLINOIS (USA)
Premium
Boilers and cooling towers share two major water related problems: deposits and corrosion. As steam is generated by a boiler or water evaporating from a cooling tower, dissolved minerals are left behind, increasing the concentration of these minerals. Additional minerals are introduced via the water added to makeup the water lost to steam/evaporation. Eventually, the minerals reach a level (or cycle) of concentration that will cause either loss of efficiency due to scale or damage from corrosion. This level can be ...
ByMyron L Company based in Carlsbad, CALIFORNIA (USA)
Premium
Innovative solutions to prevent corrosion, deposits and microbiology. An optimal heat transfer is the most important point in every water-cooled process. Scale, corrosion and biofouling negatively affect the heat transfer. Therefore Kurita develops customised solutions for cooling and process water systems, based on the combined treatments of scale & fouling prevention, corrosion inhibition, and ...
ByKurita Water Industries Ltd based in Tokyo, JAPAN
Bio-hydrox has been proved effective at treating produced water, bringing solutions to difficult situations where the highest level and very effective oxidation is required, and where biocide reliability is not ...
ByEnvirocleen LLC based in Libertyville, ILLINOIS (USA)
The 7” colour touch screen Ultima is professionally designed to deliver appropriate solutions to all operational challenges of cooling towers including corrosion, scale and microbial growth. The comprehensive functions and user friendly navigation of Ultima allow ultimate control of your treatment program. ...
ByAquarius Technologies Pty Ltd based in Coopers Plains, AUSTRALIA
For almost 30 years, ozone has been used to remove and prevent the growth of these organisms while reducing contaminant levels (e.g. AOX and COD) through direct oxidation. Contrary to conventional halogen-based biocides, ozone does not produce unwanted by-products such as halocarbons (AOX). ...
ByOzcon Environmental based in Edgbaston, UNITED KINGDOM
Superior reliability for superior control! Biocide treatments are essential to control microbiological growth in cooling systems. If not properly managed, the warm environments of cooling systems are ideal for the growth of microorganisms. As microorganism communities grow in cooling systems, they can attach to pipe walls and form biofilms. These biofilms pose serious risks, from human health risks like Legionnaire's disease to reduced operating efficiency and eventually to equipment failure via microbiologically ...
ByLuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA)