- Home
- Applications
- usa oregon
- liquid liquid separation
Refine by
Liquid Liquid Separation Product Applications Available In Oregon
14 applications found
Caustic Treating Systems are done with a Pre-Washer followed by a Reactor vessel. The mixture is then fed to a liquid-liquid separator to remove the water and caustic from the ...
ByBegg Cousland Envirotec Limited based in Glasgow, UNITED KINGDOM
Many lube oil recovery processes create aqueous and hydrocarbon emulsions that are difficult to separate by means of conventional liquid/liquid separations technology. Accomplishing the desired separation requires that these emulsified droplets be captured. Conventional coalescers are unable to provide the degree of brightness and clarity associated with good separation due to the inability to capture and remove ...
ByPentair Filtration Solutions, LLC based in Conroe, TEXAS (USA)
Mist eliminator also named misting elimination is used as the mechanical separation of liquids from gases. It is also used in liquid-liquid separation. ...
ByBoegger Industech Limited based in Anping, CHINA
With expertise in water and wastewater treatment, oil/water separation, liquid/liquid and liquid/solids separation, WesTech works closely with professionals in the petroleum and chemical industries. ...
ByWesTech Engineering, LLC based in Salt Lake City, UTAH (USA)
Sedimentation, flotation, mixing, pulp separation and chemical recovery systems are among the myriad of process equipment WesTech supplies to the pulp and paper industry. Customized to the unique needs of operating plants, WesTech liquid/solids and liquid/liquid separation expertise is built upon years of working with plant operators and owners. ...
ByWesTech Engineering, LLC based in Salt Lake City, UTAH (USA)
PROCESS INFORMATION: The Fractionator is fed from the reactor and side strippers are injected with steam. Naphtha and Light Cycle Oil are produced. In a Pipestill, fed from a crude furnace, the side strippers produce Jet A, Gas Oil and Diesel or Heavy Gas ...
ByBegg Cousland Envirotec Limited based in Glasgow, UNITED KINGDOM
PROCESS INFORMATION: The Amine gas treating, also known as gas sweetening, refers to a process that uses aqueous solutions of various alkylamines (commonly known as amines) to remove hydrogen sulphide (H2S) and carbon dioxide (CO2) from gases. Aqueous solutions of MEA (monoethanolamine) are used as a gas stream scrubbing liquid in amine treaters to remove H2S from sour natural gas. The MEA reacts with acidic compounds dissolved in the solution, using a large surface area to contact with the cold scrubbing solution ...
ByBegg Cousland Envirotec Limited based in Glasgow, UNITED KINGDOM
PROCESS INFORMATION: The Naptha Hydrotreater prepares feedstock for downstream reforming or isomerization. The naphtha feed is mixed with hydrogen rich recycle gas. The mixed feed is then heated and then fed to the reactor, which contains a cobalt-molybdenum or nickel-molybdenum catalyst to convert contaminants such as sulphur, nitrogen, oxygenates and halides to hydrogen sulphide, ammonia, water and hydrogen halides. These can then be removed from the hydrocarbon stream. ...
ByBegg Cousland Envirotec Limited based in Glasgow, UNITED KINGDOM
Level detection is a very widespread measurement requirement. Whilst there are many techniques for detecting liquid surfaces, it is much more challenging to identify the interface between liquids and other ...
ByIndustrial Tomography Systems Ltd. (ITS) based in Manchester, UNITED KINGDOM
Whether it's the extraction of specific contents, classification, dewatering or the separation of different liquid mixtures. Processes in the chemical and pharmaceuticals industry must be safe and error-free, and must also run efficiently. ...
ByHiller GmbH based in Vilsbiburg, GERMANY
In the areas of chemicals, pharmaceuticals and foodstuffs, there are numerous possible applications for Flottweg Tricanter, Sedicanter and Sorticanter machines as well as decanters, belt presses and separators: Manufacturing lactose and casein in the dairy industry, separating plastics - plastics recycling, algae harvest, manufacturing soya milk and soya proteins, drying okara, manufacturing wheat starch, dewatering PVC, dewatering suspension ...
ByFlottweg SE based in Vilsbiburg, GERMANY
Global supplier and manufacturer of Separation Technologies, Process equipment, Mass Transfer and Filtration ...
ByEuromesh BV based in Sliedrecht, NETHERLANDS
SSI designs and manufactures size reduction systems to prepare solid wastes for thermal treatment or conversion to alternative fuels. SSI Shredding Systems, Inc. has been developing and refining a wide range of products and engineered system solutions to convert waste materials into usable fuels for industry. SSI has the experience, product range and desire to exceed your ...
BySSI Shredding Systems, Inc. based in Wilsonville, OREGON (USA)
Hiller DecaFood machines provide world-class standards for high-performance decanter centrifuges and the modern range of Hiller DecaFood Decanter Centrifuges reflects our ongoing commitment to mechanical development and process optimization for a wide variety of food processing technologies. Applications such as fruit and vegetable juices, spice extraction, wine, grape must production or dregs processing are only some of the examples where the DecaFood system can be applied. As our customer you benefit ...
ByHiller Separation and Process based in Lampasas, TEXAS (USA)