- Home
- Applications
- air testing
Refine by
Air Testing Product Applications
237 applications found
Several EU directives and national laws in European countries set requirements for continuous monitoring of flue gas emissions at power plants. The demand for emission measurements has only increased in recent years and the trend will undoubtedly continue. It is therefore increasingly important for power plants to have reliable information available on emission of air pollutants. A power plant’s license to operate can even depend on it. Because the reduction of emissions to desired levels requires ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Dramatically increase your QC lab's productivity with faster, more accurate enumeration and digitization of high-volume air, surface, and personnel monitoring. The high-volume testing often found in the combination of air, surface, and personnel monitoring can create headaches for busy labs. Testing and analyzing samples for microbial environmental monitoring (EM) quality control is typically a time-consuming, manual process. ...
ByRapid Micro Biosystems, Inc. based in Lowell, MASSACHUSETTS (USA)
Premium
Spectrometric monitoring offers a continuous operating measurement system for nuclide specific detection of low level gamma contamination in air and in ...
ByBertin Technologies based in Montigny-le-Bretonneux, FRANCE
Heating, Ventilation and Air Conditioning (HVAC) is the technology of indoor and vehicular environmental comfort which aims to provide optimal wellbeing, safety and cost efficiency of those inhaling the air. This cannot be achieved without measuring the air quality by determining the carbon dioxide content of the ...
ByEdinburgh Sensors Ltd - TECHCOMP Group based in Livingston, UNITED KINGDOM
The correct functioning of HEPA filters is normally tested at the time of installation, as well as part of the routine maintenance programme. It is normally recommended that HEPA filters are checked at 14 month intervals or less, or immediately after filter changing. Where high efficiency filters are fitted, it is vital that the filter housing/sealing device does not allow particulate material to pass and thereby compromise the cleanroom environment that is being served. Testing is necessary since HEPA filters can ...
ByConcept Smoke Systems | Concept Engineering Ltd. based in Maidenhead, UNITED KINGDOM
The correct functioning of HEPA filters is normally tested at the time of installation, as well as part of the routine maintenance programme. It is normally recommended that HEPA filters are checked at 14 month intervals or less, or immediately after filter changing. Where high efficiency filters are fitted, it is vital that the filter housing/sealing device does not allow particulate material to pass and thereby compromise the clean room environment that is being served. Testing is necessary since HEPA filters ...
ByConcept Smoke Systems | Concept Engineering Ltd. based in Maidenhead, UNITED KINGDOM
Premium
Many industrial facilities use compressed air in their processes. Since this compressed air is very expensive to produce due to high energy costs, it is critical for facilities and campuses to accurately measure their air flow usage. To accomplish this task, facilities managers conduct compressed air audits to determine usage rates. These audits, using an industrial air flow meter measuring in Cubic Feet Per Minute or CFM, uncover inefficiencies and identify leaks in the compressed air system. Since air flow of ...
BySierra Instruments, Inc. based in Monterey, CALIFORNIA (USA)
The exhaustive compatibility testing provided the technology with an acceptance within the industry beyond what could have been expected of a ‘new’ invention. The compatibility testing protocols used were very similar to those currently required by the aero industry for aviation jet fuel. This testing is also applicable to the oil industry. During the early development of Aquasolve™ it was suggested by an established scientific figure that one of the reasons for the permanent dissolving of ...
ByCoval Aquasolve Limited based in London, UNITED KINGDOM
Premium
ERG’s extensive experience of gas cleaning includes treating the flue gases from Fire Testing facilities. These include furnaces and test rigs testing the combustion properties of building cladding, cables and batteries. ...
ByERG (Air Pollution Control) Ltd based in Horsham, UNITED KINGDOM
Premium
Clean coal technology relies on our high temperature thermal flow meters to measure preheated combustion air in the large ducts feeding to the coal fired burners for maximum efficiency. Our vortex flow meters are ideal for steam, water and air flows as ...
BySierra Instruments, Inc. based in Monterey, CALIFORNIA (USA)
The MiL routinely performs rapid microbial identifications, confirmations, and tracks contaminant sources of all pathogenic, indicator and spoilage organisms using the latest technologies such as GC FAME, Biolog, Ribotyping, and 16S rRNA base pair sequencing. Our computerized identification databases have over 3,500 microorganisms profiled and include all pathogenic bacterial strain subspecies, yeast and molds, and ...
ByPluton Biosciences, Inc. based in St. Louis, MISSOURI (USA)
Aroma real-time quantification with PTR-MS. Rapid screening for complex aroma systems. Rich chemical fingerprints due to soft ionization. Real-time sampling: high throughput. Ideal for chemometric data-mining methods. ...
ByIonicon Analytik Ges.m.b.H. based in Innsbruck, AUSTRIA
We are USDA certified to receive soil and groundwater samples from all over the world, including restricted areas in the southeastern United States. Typically, clients are provided sterile containers to collect soil and/or groundwater samples, and they ship them via overnight express mail in coolers packed with blue-ice. Our laboratory annually analyzes thousands of samples and issues hundreds of reports with full raw data appendix, with 100% on-time ...
ByPluton Biosciences, Inc. based in St. Louis, MISSOURI (USA)
In every aspect of design specification whether it be on Airframe fuel systems or engine fuel systems the aviation industry knows that one of its biggest problems is ingress of moisture / water, as it can and does lead to catastrophic failures in aircraft ...
ByCoval Aquasolve Limited based in London, UNITED KINGDOM
Maxxam provides the mining industry with comprehensive analytical testing services including water, soil and air quality parameters. Analytical testing ranges from metal leaching and acid rock drainage, to Ecotoxicology services and environmental chemistry. We are accredited for specific analytical tests related to mining test regulations and requirements. Along with being accredited for tests such as ...
ByBureau Veritas North America, Inc. based in New York, NEW YORK (USA)
Several EU directives and national laws in European countries set requirements for continuous monitoring of flue gas emissions at power plants. Further requirements are set on the quality assurance of the installed measurement systems at the plants. The relevant standard in this regard is EN 14181:2004, the quality assurance of automated measuring systems. The standard dictates how to determine that the measurement systems installed for continuous emissions monitoring at a plant operate according to the directives ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
One of the most frequent applications for furnaces is the ashing of food and feedstuff samples – Carbolite’s AAF ashing furnaces remove all organic material from a sample through heating in air. The objective of the test is often to establish the total mineral content or is used as an intermediate step in sample preparation to allow subsequent characterisation by elemental analysis. ...
ByCarbolite A Verder Company based in Hope, UNITED KINGDOM
Over the past few years there has been an enormous surge in interest in the application of low-cost sensors to measurements of air pollutants by educators, citizen scientists and members of various groups interested in air pollution levels in their own ...
By2B Technologies based in Boulder, COLORADO (USA)
Ozone Disinfection to Combat Viruses and Protect Human ...
By2B Technologies based in Boulder, COLORADO (USA)
Machining: Tolerance to + - 0.02mm. Testing: 100% Inspected by Air Gauge for Sealing Part for Explosion Proof Purpose. ...
ByXuancheng Chieftech Metal Technology Co., Ltd. based in Xuancheng City, CHINA