- Home
- Applications
- biocontamination
Refine by
Biocontamination Product Applications
36 applications found
Premium
Coriolis air sampler collects biological particles in the air for biocontamination control in a biomedical and health ...
ByBertin Technologies based in Montigny-le-Bretonneux, FRANCE
The manufacture of biopharmaceutical agents such as therapeutic monoclonal antibodies, vaccines and cell-based therapies like CAR-T cells require the highest quality control against the contamination of adventitious agents. These pathogens can enter the manufacturing process at multiple stages and impact yield and safety. Current methods for detection of adventitious agents are expensive, lack sensitivity and have long turn around times to results. Moreover, many of the current adventitious agent testing methods ...
ByAccuGenomics, Inc. based in Wilmington, NORTH CAROLINA (USA)
Premium
Deposits in water systems, especially in heat exchangers, result in a significant heat transfer reduction, in low efficiency and a loss of cooling capacity. Some systems, after long operational periods without any water conditioning or with inadequate treatment, need cleaning. Therefore Kurita Water Solutions proposes acidic, alkaline and neutral cleaners to remove deposits, scale, fouling, dirt, grime or ...
ByKurita Water Industries Ltd based in Tokyo, JAPAN
Premium
Individual solutions to meet the essential requirements for food safety. This article about Food Safety provides a first overview about Analytik Jena solutions for food and agriculture analysis. Food safety covers many aspects of the food chain – from point-of-origin to the nutritional value, the presence of pathogens, toxic metals, and other biological contaminants, to the elemental composition of animal feed and soil that affect animal and plant health. National and international directives help to ...
ByAnalytik Jena - Lab-loving people based in Jena, GERMANY
Premium
When raw materials are purchased it is critically important to verify that the correct materials have been received for quality, regulatory, and economic reasons. Often these raw materials, such as food or pharmaceutical ingredients, are transported in plastic bags or paper packaging. Packaging can be opened to perform a verification test using analytical techniques such as assays or infrared spectroscopy. ...
ByGalaxy Scientific Inc based in Nashua, NEW HAMPSHIRE (USA)
Current U.S. CARC systems are a combination of pretreatments, primers and topcoats. After surface preparation and pretreatment, exteriors of vehicles are painted with an epoxy primer, then with an aliphatic polyurethane topcoat. The interior of hull-type vehicles gets an epoxy enamel over the epoxy ...
ByIntegument Technologies based in Tonawanda, NEW YORK (USA)
Methodology: All biological residues contain ATP. When living cells die ATP is degraded to ADP and finally AMP. Measurement of ATP+AMP is a proof of biological residues being present. This can be done using the unique Kikkoman LuciPac Pen (surfaces) or LuciPac Pen Aqua (liquids) with a portable instrument PD-30. Hygiene control measuring ATP only may underestimate the contamination if ATP has been degraded in the biological residues. On the other hand ATP is an indicator that the residues are still alive. Neither ...
ByBioThema AB based in Handen, SWEDEN
Microbes and bio-contaminants are pollutants such as bacteria, germs, and virus. All are small in size and usually microscopic, yet they have an amazing ability to do damage to all living organisms including plants and humans. When dealing with medical-grade and food products it is important to maintain the highest levels of sanitation possible. Many everyday illnesses are caused by viruses like the common cold or the flu. AgriAir purifiers will destroy 99.99% of airborne and surface bio-contamination helping to ...
ByOmniCleanAir based in Mukilteo, WASHINGTON (USA)
Contamination occurs when any undesirable substance or material enters a product or controlled environment. These contaminants can pose health hazards, degrade product quality, and cause compliance issues. ...
ByKDV Flow Limited based in Leeds, UNITED KINGDOM
Ultrapure water is essential in the pharmaceutical industry as it provides a high purity solution free of biological contamination for use in medical products. Supplying these systems is market worth 714 million. There is a shift in the industry as manufacturers of low-cost generic drugs take advantage of the expiry of patents on blockbuster drugs. Water technology suppliers need to be able to supply a reliable system to fit the increasingly tightened budgets within the industry. Developing markets like India, ...
ByGlobal Water Intelligence (GWI) based in Oxford, UNITED KINGDOM
Controlling mold spores and bio-contaminants is a challenge for indoor gardeners that requires attention to detail and specialized equipment. An average cubic foot of air has around 100,000 mold spores. When sufficient moisture is available, mold grows. AgriAir Purifiers control and eliminate Aspergillus and many other types of spores, mildew, odors, and VOC as well as sanitize the air and hard surfaces from biological contaminants generated by organic decay during the entire growing process. AgriAir Purifiers ...
ByOmniCleanAir based in Mukilteo, WASHINGTON (USA)
Novamem membranes are able to filter off single molecule from a solution, thanks to the very small pore sizes. In most synthesis steps, the synthesized molecule ends up in a solvent mixture. To finally retrieve the product molecule, a lot of tedious steps have to be carried out. Our Novamem membranes can simplify such recovery processes significantly. The small pore sizes can separate different sized molecules, for example monomers from dimers, with a simple physical nanofiltration. The filtration of molecule ...
ByNovamem Ltd based in Schlieren, SWITZERLAND
Reduce biological contamination, naturally: By adapting our biophotonic treatment and bacteriostatic mechanism of action to cooling towers, we can reduce biological contamination, significantly. Our solution is all-natural, based on physics, and requires little to no energy, making it scalable and ...
ByEngeenuity, LLC. based in Costa del Este, PANAMA
MEMFILL has a physical, chemical, and biological processes to remove contaminants and produce treated wastewater that is safe enough for release into the ...
ByMemfill Tech Private Ltd based in Karaikudi, INDIA
Water can become contaminated with many organics, ammonia and other compounds that use up oxygen and create unhealthy water conditions and unpleasant odors. To clean and rid water of these undesirable contaminants, bacteria and oxygen are required in sufficient amounts to oxidize, or breakdown, ...
ByMetaMateria Technologies based in Columbus, OHIO (USA)
Air biofiltration is a treatment that allows you to reduce the odors that come out of industrial or waste treatment plants. ...
ByDaliform Group Srl based in Gorgo al Monticano (TV), ITALY
Treating wastewater with BioHaven Floating Island lagoon treatment systems can mean huge savings for the small community whose lagoons are not meeting discharge standards and are faced with an upgrade. Large treatment facilities can utilize BioHavens to polish their tertiary effluent and even harvest marketable ...
ByFloating Island International, Inc. (FII) based in Shepherd, MONTANA (USA)
With an increasing emphasis on safety, product quality and regulation, the requirement for efficient and effective disinfection of liquid sugar applications has seen many manufactures turn to UV disinfection systems for an effective, non chemical solution. Concentrated sugar syrups have a high osmotic pressure, which prevents micro-organisms from reproducing. However, many micro-organisms still survive in spore form and have the ability to grow and reproduce upon dilution of the sugar syrup solution thus causing ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in Wigan, UNITED KINGDOM
In healthcare, Indoor Air Quality (IAQ) is mission critical. Medical equipment and facilities require increasingly higher levels of air quality. Further, patients, staff, and doctors all expect the air they breathe to be free of pathogens and contaminants. This has led to the use of more robust filtration systems that are able to address particle, biological, and gas phase contaminants. However, since over 90% of the cost of cleaning the air is the cost of the energy to move it through the system, providing ...
ByDynamic Air Quality Solutions based in Princeton, NEW JERSEY (USA)
Modern tools and methods for monitoring contamination in air, on surfaces, and waters, as well as biological and particulate contamination in intermediate products such as cell culture media, finished products including parenteral fluids and compound ...
ByInnovaPrep LLC based in Drexel, MONTANA (USA)