- Home
- Applications
- chemical information
Refine by
Chemical Information Product Applications
33 applications found
X-ray photoelectron spectroscopy is ideally suited to the surface characterisation of these polymers as it can provide quantitative chemical state information from the upper 10nm of the ...
ByKratos Analytical Ltd. based in Wharfside, UNITED KINGDOM
This technique can achieve multiple analysis results per measurement and determine real–time chemical information at-line and ...
ByBruker Corporation based in Billerica, MASSACHUSETTS (USA)
Production of refractory products with the required quality and properties demands continuous monitoring in the process of such constituents as MgO, SiO2, CaO, Fe2O3, Al2O3, Cr2O3, B2O3, MnO2 etc. Real-time information on chemical composition of magnesite and other refractory raw materials supplied for crushing, separation and then for heat treatment enables to optimize the process and operating costs, control stockpile formation, significantly reduce energy consumption and avoid ...
ByLyncis based in Vilnius, LITHUANIA
When water from a variety of sources enters the plant, continuous phosphate measurements are critical to ensure efficient process control and inform early chemical dosing during the primary treatment. In-Situ ChemScan mini analyzers with large, anti-clogging sample lines, a rugged manifold design and a self-cleaning pump to eliminate fouling provide a reliable, low-maintenance phosphate monitoring ...
ByIn-Situ Process based in Fort Collins, COLORADO (USA)
Identifying Components in Polymer Films via hyPIR Imaging. hyPIR (hyperspectral PiFM infrared) image consists of (n x n) pixels of PiFM spectrum. This is a hyPIRTM image (128 x 128 pixels) of 5 nm of PS homopolymer that is spin-coated onto a 2 nm thick PMMA homopolymer on top of silicon substrate. Due to the thin PS layer and its immiscibility with PMMA, PS has dewetted into nanoscale droplets. Up to three distinct region of a hyPIRTM image can be selected to average the spectra for each region. Up to three peaks ...
ByMolecular Vista based in San Jose, CALIFORNIA (USA)
Sigray's products were designed to optimize performance for time-based studies of samples in situ (e.g. on flow or fracturing), measuring changes to composition, chemical state, and ...
BySigray, Inc based in concord, CALIFORNIA (USA)
InterceptIR, a version of our XplorIR gas detector, was designed for integration onto a variety of robotic platforms using the provided power and communication. This pairs the gas identification capability of the InterceptIR with the remote control features of the unmanned system, providing safer site characterization. The InterceptIR has a low SWaP (Size Weight and Power) payload and the ability to identify over 5,600 gases and vapors ...
By908 Devices Inc. based in Burlington, MASSACHUSETTS (USA)
KMI Zeolite can reduce burner fuel use in warm mix asphalt by 35% or more. Warm Mix Asphalt produces reduced emissions, allows for an extended paving season, and reduces workers' exposure to harmful toxins. A number of benefits were consistently identified as driving the development of Warm Mix Asphalt (WMA) in Europe. These benefits include environmental aspects and sustainable development concerns, or “green construction,” particularly reduction of energy consumption and the resulting reduction in ...
ByKMI Zeolite Inc. based in Pahrump, NEVADA (USA)
WITec imaging systems enable comprehensive sample analysis to provide a thorough characterization of the physical and chemical properties of various samples in forensics. Confocal Raman imaging for example is a very effective tool for these investigations as it provides information on the chemical composition as well as the spatial distribution of the components. ...
ByWITec GmbH based in Ulm, GERMANY
Spinsolve benchtop NMR spectrometers are a valuable tool to characterize polymers at different stages during production, from the structure verification of the monomers before the polymerization to quality control of the final ...
ByMagritek Ltd. based in Malvern, PENNSYLVANIA (USA)
With confocal Raman imaging the spatial distribution and association of components or mineral phases, or chemical variation can be observed and this information may contribute significantly to the understanding of a sample’s complexity. ...
ByWITec GmbH based in Ulm, GERMANY
Aerosol particles are ubiquitous in ambient air and are of great importance to human and environmental health, climate change, and many industrial processes. The ability to measure their chemical composition is essential to understand the sources of aerosols, their chemical properties, and their potential ...
ByTofwerk AG based in Thun, SWITZERLAND
In archeological research, various specimens such as paintings, mummies, antique objects or fabrics are regularly investigated. Those samples are often unique and require specialized treatment when being analyzed. WITec imaging systems enable comprehensive sample analysis that provides a thorough understanding of the physical and chemical properties of archaeological samples. Confocal Raman imaging for example is a flexible, non-invasive and non-destructive tool for the chemical and molecular characterization of ...
ByWITec GmbH based in Ulm, GERMANY
The chemical industry involves many substances, also dangerous ones. For this reason, the correct handling of such chemicals is extremely important. Chemical laboratories deal every day with a lot of data deriving from many measurement methods. For this reason, the right laboratory software solution makes a big difference in quality. LIMS software is a good solution to manage both your lab and your workflows. ...
ByFink & Partner GmbH based in , GERMANY
From liquids to emulsions, solid samples, or coatings, etc. in the food technology diverse samples are analyzed on a regular basis. The flexible WITec imaging and analytical tools provide the opportunity to adjust the imaging technique to varying requirements. The samples can be comprehensively analyzed regarding their chemical and physical properties and depth profiles and 3D images can be generated to visualize the results in a clear and accessible ...
ByWITec GmbH based in Ulm, GERMANY
Materials science is a diverse field including the development and testing of new substances, as well as the refinement of manufacturing processes and quality control for existing products. WITec imaging systems are particularly well-suited for comprehensive sample analyses in materials science and provide the opportunity to acquire a thorough knowledge of the sample surface morphology and chemical ...
ByWITec GmbH based in Ulm, GERMANY
Polymers have an important place in modern materials science. Due to the varying mechanical and chemical properties of polymers, they are used in almost every field of application and are important for the development of new materials with demanding requirements. WITec imaging systems enable comprehensive sample analysis that provides a thorough characterization of the physical and chemical properties of the polymers on the nanometer ...
ByWITec GmbH based in Ulm, GERMANY
Coatings and thin films are designed and developed to establish or alter various surface characteristics and in many cases the relationship between structure, morphology, and material properties is indispensable for the optimization of the material design. WITec imaging systems are particularly well-suited to contribute to the analysis of multi-component coating systems and thin films by visualizing the distribution of individual chemical components and the physical properties of different material ...
ByWITec GmbH based in Ulm, GERMANY
Structured substrates are widely employed in semiconductor and photovoltaics research and development. The high demands on device quality and reliability make it increasingly important to have a detailed knowledge of the inherent strain and crystalline properties of such device structures. The WITec imaging techniques provide the opportunity to analyze the samples comprehensively regarding their chemical and physical ...
ByWITec GmbH based in Ulm, GERMANY
From measurements in liquids to solid samples or soft tissues in life science varied samples are analyzed on a regular basis. With their convenient handling and versatile analytical capabilities the flexible WITec imaging systems provide the opportunity to adjust the imaging technique to changing requirements and are particularly well-suited for life science. The samples can be comprehensively characterized regarding their biochemical and physical properties and depth profiles and 3D images can be generated to ...
ByWITec GmbH based in Ulm, GERMANY