- Home
- Applications
- coal fired plant
Refine by
Coal Fired Plant Product Applications
43 applications found
Premium
Coal-fired power plants are main pollution source of flue gas, SO2 and NOx, etc. The pollution from Coal-fired power plants severely destroy living environment and ecological environment. ...
ByHangzhou Chunlai Technology CO., Ltd. based in  Hangzhou, CHINA
Premium
Supporting clean coal technology. Coal is an abundant source of fuel. A new coal fired power plant goes on-line each month in China and clean coal technology is taking hold in the USA once again as a positive source of energy. ...
BySierra Instruments, Inc. based in  Monterey, CALIFORNIA (USA)
Premium
Supporting clean coal technology. Coal is an abundant source of fuel. A new coal fired power plant goes on-line each month in China and clean coal technology is taking hold in the USA once again as a positive source of energy. ...
BySierra Instruments, Inc. based in  Monterey, CALIFORNIA (USA)
Most large coal fired plants have a flue gas desulphurisation (FGD) plant to lower SO2 levels to below emission limit levels. The CODEL GCEM 40 series is used to monitor SO2 levels after the FGD to ensure they are below required levels and to ensure that the process is not too efficient and using too much sorbent. In addition, many plants monitor pre and post the FGD to ascertain the efficiency of the ...
ByCodel - a Forbes Marshall company based in  Bakewell, UNITED KINGDOM
A coal-fired power plant in India, Hidalco Industries, needed a sure-fire way to detect the flow or no-flow of coal from the feeders to the furnaces. A plugged chute or equipment failure would possibly go unnoticed until a more serious problem occurred. Knowing whether the coal was positively feeding into the furnaces was of paramount importance to the efficient operation of the power plant. How ...
ByMonitor Technologies, LLC based in  Elburn, ILLINOIS (USA)
LaserGas measurements Boiler combustion control, O2 and CO DeNOx system, NH3 and NO Electrostatic precipitators (ESP), CO monitoring for explosion prevention Stack gas emissions, NH3, H2O, NO Coal silos, CO monitoring for explosion prevention and detection of smouldering fires (only in coal fired plants) LaserDust measurements Stack gas emission Coal silo, explosion prevention ...
ByNEO Monitors - a Nederman company based in  Skedsmokorset, NORWAY
Air free of radioactive elements is critical to maintaining clean air. Terrorist activity, smoke from fires in facilities using nuclear materials, radioactive effluent from manufacturing or nuclear and coal-fired plants, naturally occurring radiation in the form of radon and radium, all contribute to radiation in the air. ...
ByUS Nuclear Corporation based in  Canoga Park, CALIFORNIA (USA)
Coal-fired power plants, waste incineration power plants, oil refineries, natural gas facilities, ...
ByHorizon Tek Services based in  , UNITED KINGDOM
Premium
Introduction Mercury is one of the most toxic trace contaminant naturally occurring in the coals. During the coal combustion process at the coal-fired power plants mercury is released into the environment. To manage effectively the stack gas cleaning process, it is necessary to know the mercury content in the coal, and also in stack gas, liquid and solid ...
ByLumex Instruments based in  Mission, BRITISH COLUMBIA (CANADA)
International laws defining rigid limits to polluting gas emissions in the atmosphere have initially interested plants such as waste-to-energy plants and coal-fired power plants but they are today applied to all industrial activities with high polluting potential (energy activities, production and transformation of minerals, mineral product industry, chemical industry, waste management etc.). ...
ByG.T.S. Grinding Srl based in  Besozzo (VA), ITALY
Bulk material handling in coal-fired power plants and all associated sectors of industry is big business. ...
BySeid based in  Sandnes, NORWAY
Co-firing is the (partial) substitution of fossil coal by biomass in coal-fired power plants. Torrefied biomass offers the most cost-effective route to significantly increase the use of biomass as a renewable energy source and to reduce the CO2 footprint of industrial coal ...
ByBlackwood Technology B.V based in  Hoofddorp, NETHERLANDS
Ammonia monitoring is essential in coal-fired power plants, where NH3 is used to reduce NOx emissions. The ammonia consumes all of the NOx, but its high concentration that is needed for these purposes also starts reacting with other things and in the process can clog up filters and cause premature failure of expensive SCR equipment and pre-heaters. ...
ByUnisearch Associates Inc. based in  Concord, ONTARIO (CANADA)
FGD is Key to Coal-Fired Power Generation: Wet Flue Gas Desulfurization (FGD) is a process by which coal-fired power plants remove sulphur dioxide (SO2) before emitting their flue gas into the atmosphere. ...
ByCrossTek Membrane Technology LLC based in  Holbrook, MASSACHUSETTS (USA)
Power Generation Combustion Air Measurements: The need for accurate, repeatable & reliable combustion air measurements in power generation plants is critical to efficient operation and safety throughout the entire facility and processes. Coal-fired power plant applications pose a number of challenges to obtaining these critical flow measurements includ¬ing large ducts, limited metering runs, poor velocity and temperature profiles, high ...
ByKurz Instruments, Inc. based in  Monterey, CALIFORNIA (USA)
For the removal of mercury emissions from flue gas streams, Calgon Carbon's specialty PAC products are proven industry performers. These industries include: Coal-fired electric power plants, Cement, ...
ByCalgon Carbon Corporation based in  Moon Township, PENNSYLVANIA (USA)
FGD (Flue Gas Desulfurization) involves the treatment of flue gas from coal fired power plants. The main goal is to remove sulfur, particulates, and other chemicals such as mercury from the flue gas prior to environmental release. ...
ByNational Oilwell Varco (NOV) based in  Houston, TEXAS (USA)
This means a lot of waste streams can be turned into alternative fuel for the coal fired power plant, cement and lime industry, biomass power plant, or other industrial boiler systems that still burning fossil ...
ByeFACTOR3 LLC based in  Pineville, NORTH CAROLINA (USA)
In steam power plants, the thermal energy contained in water vapour is used to power a steam turbine which in turn drives the generator. In the process, conventional fuels such as oil, natural gas, hard coal or brown coal are used to fire the steam boiler. In coal-fired power plants, coal is the only fuel used, whereas waste incineration facilities can also use treated waste in ...
ByJ.P. Sauer & Sohn Maschinenbau GmbH based in  Kiel, GERMANY
Boreal’s products are tailor made for coal fired power plants, natural gas fired, and waste-to-energy. Whether gas detection is used for safety, process, or environmental reasons, Boreal has you ...
ByBoreal Laser Inc. based in  Edmonton, ALBERTA (CANADA)