- Home
- Applications
- construction testing
Refine by
Construction Testing Product Applications
10 applications found
Before applying ECOROADS®, make sure that structural materials which are planned for use in construction of the road base have a gradation mix (size distribution) that will result in good load bearing values and contain approx. 15% to 30% non-granular fines (-200 mesh size and cohesive in nature). Prior to construction, field testing was necessary to determine suitability, and upon completion of testing, excellent results were obtained. Some ...
ByTerraFusion International, Inc. based in Bellevue, WASHINGTON (USA)
The air tightness or leakage rate of a building is the uncontrolled flow of air through holes, gaps and cracks in the fabric of a building, which may not be detectable simply by looking at the outside of the building. Filling a building or void with smoke and pressurising that volume, will result in a visible discharge of smoke from any problem areas. Smoke is the perfect medium for discovering where leaks are and how big they ...
ByConcept Smoke Systems | Concept Engineering Ltd. based in Maidenhead, UNITED KINGDOM
The advisory service begins even before the actual construction of the photovoltaic power plant - in the design and contract review. It is ensured that all the requirements of the building permit of the relevant Japanese authorities are fulfilled and the contract is aligned with the system. Based on the continuous construction and factory acceptance tests of components, possible quality defects from the start can be reduced to an absolute minimum. ...
ByK&S Ingenieurpartnerschaft Krug & Schram based in Munich, GERMANY
The advisory service begins even before the actual construction of the photovoltaic power plant - in the design and contract review. It is ensured that all the requirements of the building permit of the relevant Japanese authorities are fulfilled and the contract is aligned with the system. Based on the continuous construction and factory acceptance tests of components, possible quality defects from the start can be reduced to an absolute minimum. ...
ByK&S Ingenieurpartnerschaft Krug & Schram based in Munich, GERMANY
NET electrochemical cells are designed to exceed EN 50545-1 specifications for the detection of carbon monoxide (CO) and nitrogen dioxide (NO2). An efficient gas detection system will ensure a safe breathing environment for users and workers in parking, tunnels and other confined spaces with constant presence of vehicles. This while reducing costs for the facility and increasing the overall environmental quality and well-being for all. Discover ...
ByNET Srl based in Pregnana Milanese, ITALY
WaterTectonics treatment systems have been active since 1999 in a variety of construction applications including: residential developments, remediation, superfund site cleanups, dewatering and highway expansions. Our systems are designed with simple controls and automation to ensure consistent up-time and compliance with water quality ...
ByWaterTectonics based in Everett, WASHINGTON (USA)
Waste management is a matter of priority and prime concern to the government and administrative bodies. Secure Landfills are considered to be the best available technical option for the safe disposal of enormous quantities of solid wastes including municipal, industrial and hazardous chemical wastes generated by modern urban industrialised ...
ByGorantla Geosynthetic Pvt Ltd (GGPL) based in Chennai, INDIA
Before natural gas or oil is transported through new pipelines, the entire length of the pipeline assembly is pressure tested using either fresh water or seawater, and is the final construction ‘quality assurance’ test before the pipeline is put into operation. The pressure test is held for a specific amount of time, from between 1 day and 100 days, to ensure structural integrity before the pipeline is placed into ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in Wigan, UNITED KINGDOM
Common examples of construction applications include curing concrete, structural testing, temperature monitoring of building materials, vibration monitoring, and more. ...
ByCAS DataLoggers based in Chesterland, OHIO (USA)
CEMENT INDUSTRY: Performed RCRA Trial Burn and Comprehensive Performance Test Programs for multiple kilns firing hazardous waste ...
ByAirSource Technologies, Inc. based in Shawnee, KANSAS (USA)