- Home
- Applications
- contaminant sampling
Refine by
Contaminant Sampling Product Applications
20 applications found
In research, it’s important to ascertain the purity of DNA and RNA samples prior to downstream processes. Proteins and other contaminants like phenol and salts may interfere with the sample and produce a lower absorbance ratio. This informs users that contaminants are present in the sample and allows a change to be made before contaminated sample ends up in downstream processes. ...
ByCustom Sensors & Technology (CST) based in Fenton, MISSOURI (USA)
Premium
INTRODUCTION Quantitative determination of the total mercury content in filtrates of wash-off samples from the surfaces of walls, floors, equipment, and other facilities of m anufacturing areas is an effective method for the occupational safety ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
The OVT container is an innovative product and a highly effective tool for the preliminary testing of media/soils that have been impacted by a wide variety of volatile organic contaminants of concern (COC’s). • No preparation or modification needed prior to use in field • Air tight OVT lid has built in sealed sampling ports of varying sizes to accommodate different size OVA ...
ByOVT Environmental Products based in Fort Myers, FLORIDA (USA)
Raman spectrophotometry enables quick and precise evaluation of a sample's chemical composition and molecular structure and is a beneficial analytical tool in drug quality control. Detecting active ingredients and contaminants in medicine samples is one of the most essential uses of Raman spectrophotometry in medication quality control. Raman spectroscopy makes it possible to identify the substance in the sample by determining the distinctive ...
ByGekko Photonics Ltd based in Wroclaw, POLAND
Because of the number of enviromental analysis required, there is a need for screening and monitoring measurements of these compounds at contaminated areas. Traditional monitoring techniques are typically based on laboratory analysis of field-collected samples that require considerable effort and expense, and the sample may change before analysis. ...
ByMicruX Technologies based in Gijón, SPAIN
IR-Spectroscopy is not limited to gases, solid materials and pure liquids but also facilitates the measurement of solutes in aqueous media. Though, due to the strong and temperature dependent absorption of water, the usage of conventional IR-transmission and ATR accessories is not very suitable for the analysis in water. The CONFOCHECK is a dedicated FT-IR system for the fast, easy and sensitive analysis of aqueous samples. Using this system, preparing, measuring and evaluating any aqueous sample takes typically ...
ByBruker Corporation based in Billerica, MASSACHUSETTS (USA)
Principle: Potassium was extracted from a soil sample with acidified ammonium lactate to determine plant available potassium ionic concentration present in the ...
ByBWB Technologies Ltd. based in Newbury, UNITED KINGDOM
Water and Environmental analytical laboratories perform a very wide range of analytical techniques for inorganic, organic and physical determinands (DETS) at medium to high throughput sample capacity. Such labs need to be able to produce quality results quickly and economically, with consistent turnaround times, and meet the requirements of accreditation bodies such as the DWI and UKAS. We’ve used both our Links for LIMS and AqcTools software extensively in water laboratories to reduce the time and effort ...
ByCSols Ltd. based in Runcorn, UNITED KINGDOM
SAFE CARE® cleaning products, specifically SC-1000 which is listed with the USEPA National Oil & Hazardous Substances Pollution Contingency Plan (NCP), cleans by reducing the surface tension of the oil at the substrate surface, weakening the polar attraction of oil to the surface which then allows it to be rinsed from the surface and captured. ...
ByGEMTEK Products, LLC based in Phoenix, ARIZONA (USA)
Copper alloys possess excellent electrical conductivity and are essential metallic materials in industry. In recent years, the substantial increase in global copper prices has further driven up the cost of copper alloy components. With the rapid advancement of science and technology, improving the performance of copper alloy materials has become of vital importance. Under high thermal conductivity or high heat conduction conditions, it is necessary to enhance their hardness, wear resistance, and anti-arc erosion ...
ByEfficiency Scientific Instrument Co., Ltd (ESI) based in SuZhou City, CHINA
Sample preparation is a significant yet underappreciated step that allows for high quality sequencing and analysis, critical to achieving breakthroughs in medicine, agriculture, and other industries. NanoCellect’s microfluidic cell sorter, the WOLF, allow the cell’s integrity to be maintained for numerous sequencing and multi-omics techniques. The WOLF’s ability to flexibly fit into any genomic researcher’s lab, make it a key step to any cell sequencing analysis workflow. 10x Genomics ...
ByNanoCellect Biomedical, Inc. based in San Diego, CALIFORNIA (USA)
Isolating edited-pluripotent stem cells with traditional sorting techniques can subject the cells to rough conditions in which gene expression, genomic stability and overall cell-health can become compromised. Microfluidic cell sorting with the WOLF, along with single cell deposition using the N1 single cell dispenser, eliminates the challenges that pluripotent stem cells face by sorting at gentle pressures without decompression shock and shear stress, and allow for efficient single cell deposition for high ...
ByNanoCellect Biomedical, Inc. based in San Diego, CALIFORNIA (USA)
Fast at-line determination of product quality and biological relevant status information on process ...
Bylino Biotech AG based in Zurich, SWITZERLAND
Real-time and label-free characterization of drug candidates in living ...
Bylino Biotech AG based in Zurich, SWITZERLAND
Monitoring Biomass in (Cooling Tower) Waters through ATP monitoring The TOXcontrol can be used for ATP monitoring. Currently our company is doing research for further developments for this application on the TOXcontrol. Monitoring the microbial population of cooling towers is necessary in order to maintain the proper operation of the system. Conventional methods for monitoring microbial populations work by culturing microorganisms, a time-consuming procedure that requires days or even weeks of incubation before ...
BymicroLAN B.V. - Aqualabo Group based in Waalwijk, NETHERLANDS
Banner Engineering's SureCross product line offers reliable wireless industrial I/O monitoring and control solutions for most applications, including these example wireless applications for wastewater, landfills, and biomass ...
ByBanner Engineering Corp. based in Minneapolis, MINNESOTA (USA)
InnovaPrep's innovative tools provide same-shift results for contamination monitoring in liquid foods and beverages, as well as air and surface samples in food production, preparation, and packaging ...
ByInnovaPrep LLC based in Drexel, MONTANA (USA)
If the contaminated soil exceeds the TCLP limits, stakeholders should be aware that remedial applications, such as Blastox 215® exists that can be added directly to the soil to render it non-hazardous. This significantly drives down the cost of soil remediation disposal as hazardous waste transportation and hazardous waste disposal are avoided, allowing for local, non-hazardous waste disposal. Because of its effectiveness, Blastox 215® had been used successfully on thousands of tons of heavy metal contaminated ...
ByThe TDJ Group, Inc based in Barrington, ILLINOIS (USA)
Simple and robust determination of critical quality attributes in ...
Bylino Biotech AG based in Zurich, SWITZERLAND
Surface enhanced Raman scattering (SERS) is a great technique to enhance the Raman scatter from a sample. One application SERS is well suited to is testing for the presence of pesticides on apple skin. This is important for keeping produce safe for ...
ByEdinburgh Instruments - TECHCOMP Group based in , UNITED KINGDOM