- Home
- Applications
- cooling water loop
Refine by
Cooling Water Loop Product Applications
10 applications found
The unique properties of hydrogen peroxide (H2O2) make it a good technology for keeping cooling loops, process water loops and heat exchangers clean from fouling that can occur due to various contaminants in the water. ...
ByUSP Technologies based in Atlanta, GEORGIA (US) (USA)
Water from cooling towers attracts and absorbs airborne contaminants on a continuous basis. Typically, 85% of suspended solids in cooling water and hot water loops are smaller than 5 microns. Scientific studies have shown that these small particles (5 microns and less) are the adherent contaminants fouling cooling tower water, chilled water and heat ...
ByVortisand - a brand by Evoqua Water Technologies LLC based in St-Laurent, QUEBEC (CANADA)
The engines operate on a blend of diesel fuel and natural gas. The cooling system for the power plant is a combination of closed and open loop cooling. The open loop cooling water comes from ground water wells and is circulated through the stationary power plant engines. The plant is permitted to discharge several million gallons of cooling water on a continuous ...
ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in Edmonton, ALBERTA (CANADA)
Premium
Elegant stockings, cheerfully colored paint, and trendy smartphones you wouldn't have any of these without modern chemistry. It all started in the eighteenth and nineteenth centuries with the production of sulfuric acid, soda, fertilizers, paint, artificial fibers, and medicine. Today, it has become one of the most innovative and strongest-growing sectors: the chemical industry. Along with basic chemistry, specialized chemistry, and pharmaceuticals, all of this has become the fifth-largest German industrial ...
ByBrentwood Industries, Inc. based in Reading, PENNSYLVANIA (USA)
More than 85% of contaminated suspended solids in water from cooling towers and in hot water loops, are smaller than 5 microns. These micron contaminates circulate through heat exchangers, chillers, and compressors, significantly reducing the system’s cooling ability.Even tiny scale fouling and particle formation reduces the heat transfer rate and increases the water pressure drop through the heat exchanger, ...
ByMaagan Filtration based in D.N Menashe, ISRAEL
Metalworking relies heavily on the machines used to keep productivity high. Filtering out impurities not only increases productivity and the lifespan of machinery, but makes the process of metal working safer and creates high-quality results. Keep your machines performing optimally with the right filter bag housing system from Filter Sciences. Connect with us for your custom ...
ByFilter Sciences based in Fort Wayne, ALABAMA (USA)
A typical industrial or institutional cooling water system is arranged like the schematic in Figure 1. There are typically two water loops and a refrigerant loop. Chilled water is circulated in the chilled water loop through the apparatus or building that needs cooling. ...
ByCDG Environmental, LLC based in Allentown, PENNSYLVANIA (USA)
The TD-4100 utilizes a non-fouling, non-contact flow cell which requires little to no maintenance, and uses fluorescence technology to accurately detect oil in water from low ppb to high ppm. For this application, the TD-4100 monitors oil in water at 1 to 5 ppm and signals an operator with an alarm when the concentration exceeds the high alarm relay ...
ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in Edmonton, ALBERTA (CANADA)
Hidroambiente is leader in the Iron&Steel and Metal Industry in Spain, with more than 75% of the market share. Supplying Make Up WTPs, Cooling Systems, Closed Loops and Contact Water plants. Scale Pits, Settler Tanks and Filters. ...
ByHidroambiente S.A.U. based in Las Arenas, SPAIN
The Situation:Power plants and paper mills use service water loops and mill water loops respectively for the cooling of lubricating, hydraulic, turbine and transformer oil. These cooling systems feature large, recirculating volumes of water which are treated with biocides, dispersants, and corrosion inhibitors. By comparison, refineries often use once through cooling ...
ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in Edmonton, ALBERTA (CANADA)