- Home
- Applications
- emissions control system
Refine by
Emissions Control System Product Applications
45 applications found
The amount of dust generated when storing and moving various materials, such as wood, coal and ore, is very high and poses a severe health hazard. EmiControls offers customized solutions for dust control, thereby creating a pleasant, healthy and safe environment for workers and nearby residents. Fixed dust control installations on funnels, conveyor belts and at discharge points are just as suitable for use as mobile units – the right solution to any given problem is identified during the planning and ...
ByEmiControls based in Bolzano, ITALY
Modern nozzle and turbine technology developed by EmiControls is also used as a basis for the evaporation of water. This might typically be needed in open-pit mining, for example, to deal with large unwanted pools of water. Special nozzles can be used to atomize the water for evaporation. Evaporation is also useful in salt production. The tried and tested EmiControls technology can make the rate of evaporation much faster than the natural speed of evaporation, which helps the operators save an enormous amount of ...
ByEmiControls based in Bolzano, ITALY
High volumes of dust, often extending over large areas, present a major challenge for the operators of opencast mines and quarries. If conditions are also dry and windy, the dust will affect not only the workforce but also, in many cases, entire housing estates in the vicinity. The sources of dust in surface mining areas are often distributed over very large expanses, with dust originating from various places. With their large projection range, EmiControls dust controllers are ideal for such applications. Mobile ...
ByEmiControls based in Bolzano, ITALY
Firefighting operations at airports are particularly critical as they normally involve rescuing people. The large quantities of aviation fuel make it a very high-risk activity with intense heat ...
ByEmiControls based in Bolzano, ITALY
Demolition work and the dust it generates is a big problem for residents and the environment when work is carried out in residential areas. EmiControls offers the right dust control solution for every type of demolition work, thereby protecting the inhabitants, neighboring buildings and the environment. Because the source of dust can move constantly during the demolition process, mobile solutions are ideal as they can be positioned and pivoted easily and quickly. And they can be removed from the site when the work ...
ByEmiControls based in Bolzano, ITALY
Complete smoke scrubbing emission control systems from flashover Class A type training ...
ByBionomic Industries Inc based in Mahwah, NEW JERSEY (USA)
The treatment processes in recycling plants generate unpleasant and often harmful dust, which is a health hazard not only for nearby residents, but particularly for the employees. More and more legislation is being passed on dust control requiring such in the form of mobile units or fixed installations. In composting processes, the dust problem is compounded by unpleasant odors, which can be controlled effectively with specialized equipment. The same units are also used in biogas plants or for the removal and ...
ByEmiControls based in Bolzano, ITALY
Premium
Anguil’s engineering expertise and flexible solutions guarantee destruction efficiency and optimized performance so your plant can focus on producing quality painted ...
ByAnguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA)
Raw gases are untreated flue gases that have not passed through an emissions control technology system like selective catalytic reduction (SCR) or selective non-catalytic reduction (SNCR). They are generally measured for the sakes of process control and warranty tracking. Typically only a few components are measured but fourier transform infrared spectroscopy FTIR technology allows the measurement of all ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Premium
Anguil’s innovative pollution control and power generation technologies can transform your mine emissions from greenhouse gas to renewable energy source for power ...
ByAnguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA)
Premium
Ventilation Air Methane (VAM) is a Greenhouse Gas (GHG) released by coal or mineral mining operations, it is also commonly known as Coal Mine Methane (CMM). The air pollutants from this process have a global warming potential 21 times greater than carbon dioxide, which is another well known GHG. As alternative energy technologies have developed, methane is increasingly used to generate electricity and heat. Landfills and mines represent two of the most abundant sources, however reports indicate that more than ...
ByAnguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA)
Premium
Anguil’s Engineering expertise and flexible solutions guarantee destruction efficiency and optimized performance so your plant can focus on ...
ByAnguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA)
Several industries face problems from dust released during product transportation or processing. This is the case of the Textile, Wood Processing, Mining, Ink Manufacturing and other industries. Frequently, in order to maintain an appropriate level of particles suspended in the air (usually measured in Parts per Million by Volume), dust is extracted with air in strategically positioned caption points and typically recovered in cyclones or in bag ...
ByAdvanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL
The textile mills industry includes man-made fiber mills and wool woven fabric mills, carpet and rugs, yarn-spinning mills, non-woven fabric facilities, and tire cord and fabric facilities. These businesses require provide proven emission control solutions, including mist elimination and odor ...
ByCECO Environmental based in Addison, TEXAS (USA)
Several industries face problems from dust released during product transportation or processing. This is the case of the Textile, Wood Processing, Mining, Ink Manufacturing and other industries. Frequently, in order to maintain an appropriate level of particles suspended in the air (usually measured in Parts per Million by Volume), dust is extracted with air in strategically positioned caption points and typically recovered in cyclones or in bag filters. When filters have to be used to increase capture efficiency, ...
ByAdvanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL
Steel and ferroalloys manufacturing processes involve high temperature exhaust streams, often at more than 900ºC. Typically, the gas flows from the furnace (usually electric arch type) and goes into a gas conditioning tower to cool down below 200ºC so that it can be treated by a Bag Filter. It's also common to have ESP´s as end dedusters that can be preceded by a multicyclone serving as ...
ByAdvanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL
For PM emission control in high temperature exhaust streams, such as those from fuel oil boilers, common dedusters like bag filters, have very high maintenance costs. The diesel and fuel oil fly ash can be quite sticky and clog to filter elements, which can be minimized with costly protection reagents or frequent filter elements changes. Fuel gas cooling is needed in front of the filter when temperatures are higher than ...
ByAdvanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL
The control of clinker fines emissions after the heat exchanger, placed downstream of the clinker cooler, is usually a problem for cement plant managers. The process is characterized by high material abrasiveness, high loads and variable flow rate in normal and maximum ...
ByAdvanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL
Glass and ceramic furnaces are typically associated with emissions of very fine particles (less than 5µm) in combination with high temperatures and load. An increasingly higher number of furnaces are powered with biomass fuel, further raising the level of particulate emissions that need to be treated, in order to comply with stricter regulatory limits. Solving this problem may or not require a two stage dedusting system such a cyclone pre-separation system followed by an ESP. Client's needs ...
ByAdvanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL
Sunlight-Driven Passive Advanced Oxidation: SolarPass - Downstream oxidative polishing of treatment streams to eliminate manganese, organometallics, ammonia, and organics. Simple to integrate and retrofit exisiting systems or install as a standalone treatment ...
ByH2nanO based in Kitchener, ONTARIO (CANADA)