- Home
- Applications
- filter paper
Refine by
Filter Paper Product Applications
20 applications found
Many of the air quality analyses can be performed with standard laboratory consumables, such as traditional filter papers. However, some analyses require materials with specific features, for example filters with low metal levels. ...
ByCytiva based in Marlborough, MASSACHUSETTS (USA)
Measuring Ion Concentrations in Plant Tissue Required Apparatus: Aptisens Digital or Mobile Multiple Ion Kit Weighing scales Liquid measurement device e.g. graduated cylinder Bowl for stirring Spoon for stirring Funnel Filter paper / muslin Conical flask / vessel Required chemicals: Aptisens multiple ion conditioning solution Aptisens Plant Tissue multiple ion calibration solutions Deionised water Sample Preparation: This preparation can be applied to any ...
ByAptisens based in Little Island, IRELAND
The screw press is a vital piece of equipment in the pulp and paper industry, primarily used for dewatering and thickening pulp. It operates by applying mechanical pressure through a rotating screw within a perforated or slotted screen, efficiently separating water from the pulp fibers. This process enhances pulp consistency, reducing water content for subsequent processing stages like drying or refining. Screw presses are valued for their high throughput, energy efficiency, and ability to handle various pulp ...
ByShandong Lyure Screw Press Machinery based in Zaozhuang, CHINA
This procedure uses a TCA (trichloroacetic acid) extraction of the tissue to release all of the ...
ByBWB Technologies Ltd. based in Newbury, UNITED KINGDOM
This method for the measurement of sodium and potassium in silicate rocks uses a borate fusion ...
ByBWB Technologies Ltd. based in Newbury, UNITED KINGDOM
The most important ions which naturally occur in plant tissues are sodium, potassium, calcium, magnesium, nitrate, sulphate and phosphate. A sample of 5 g of oven-dried plant material contains on average, 25 mg calcium, 9 mg magnesium, 80 mg potassium and 3 mg sodium. The recommended method for the measurement of calcium is to precipitate the calcium as an oxalate, the precipitate is then dissolved and measurement taken from the resulting solution. Sodium and potassium may be measured directly following an ashing ...
ByBWB Technologies Ltd. based in Newbury, UNITED KINGDOM
This method reduces or removes potential interference from sodium, potassium and phosphates normally present in serum and urine by diluting the samples with a diluent containing ethylenediaminetetraacetic acid ...
ByBWB Technologies Ltd. based in Newbury, UNITED KINGDOM
Cheese was wet ashed with a combination of acid and a high temperature oven to form a dissolvable product ready for analysis via flame ...
ByBWB Technologies Ltd. based in Newbury, UNITED KINGDOM
Several different techniques can be used for sample digestion and extraction of sodium and/or potassium: oven ashing, perchloric acid ashing, extraction by boiling and acidification with HNO3 as well as extraction by homogenisation in 2% trichloroacetic acid (TCA). ...
ByBWB Technologies Ltd. based in Newbury, UNITED KINGDOM
Commercial cereals vary considerably in composition, both in their formulation and the ingredients added to enrich these products. Sodium is the predominant cation in breakfast cereals, at levels reaching 8mg/g. Potassium and calcium also vary, particularly in wheat-based products and those enriched with milk products or calcium salts. ...
ByBWB Technologies Ltd. based in Newbury, UNITED KINGDOM
Principle: Potassium was extracted from a soil sample with acidified ammonium lactate to determine plant available potassium ionic concentration present in the ...
ByBWB Technologies Ltd. based in Newbury, UNITED KINGDOM
A number of methods have been reported for the measurement of calcium in biological materials by flame photometry or titration. This method employs trichloroacetic acid (TCA) to precipitate the proteins and has been found to be adequate to extract all of the calcium from tissue samples. Sodium, potassium and phosphate caused no significant interference and calcium concentration in the range of 0 to 2 µg/ml is readily determined. ...
ByBWB Technologies Ltd. based in Newbury, UNITED KINGDOM
The Photovolt Aquatest 2010 moisture analyzer provides rapid, accurate, and convenient low level moisture analysis ranging from low ppm to pure water with maximum isolation of solutions from atmospheric moisture. With a range of 1 ppm to 1,000,000, typical applications include low level moisture applications for liquids and dispersed solids, pharmaceutical samples, lubricating oils, chemicals and solvents, resins, lyophilized samples and plastics. The Department of Defense Naval Air Systems Command (NAVAIR) ...
ByPhotovolt Instruments Inc. based in St. Louis Park, MINNESOTA (USA)
The effect of potential interference from other constituents of sea water was studied, including sodium, chloride and potassium. It was found that pre-concentration of the sea water was not necessary prior to analysis. A filtration of the sample was only necessary if sample contained suspended material. ...
ByBWB Technologies Ltd. based in Newbury, UNITED KINGDOM
In most cases, it was found that flame photometry was well suited for the determination of sodium, potassium and calcium in fresh fruits, using the wet ashing technique as given below. There are significant differences in the composition between different varieties of the same fruit, although these differences are not usually considered to be nutritionally ...
ByBWB Technologies Ltd. based in Newbury, UNITED KINGDOM
Dried milk was dissolved into an aqueous solution for analysis via flame photometry. The test solutions and reference solutions are measured directly following dilution with deionised distilled ...
ByBWB Technologies Ltd. based in Newbury, UNITED KINGDOM
A wide range of sample acquisition and filtration systems are available to prepare even the most difficult of samples for reliable on-line analyser measurement. The correct choice is often critical to prevent analyser blockage and optimise performance. Cross Flow Filtration The PPM cross flow filter, is a simple in-line device used to protect an analyser from ingress of solids, for applications where sample quality is generally good but occasionally suspended solids may be present. The stainless steel filter ...
ByPollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM
Natural property of viscosity and thixotropic in bentonite makes suitable to use for paper processing to avoid agglomeration in particle distribution. Ultra fine bentonite powder under stringent quality controls having lowest sand content improves paper quality and develops good paper pulp. Being good filtering agent it helps to drain ...
ByPratham Minechem based in Bhuj Kutch, INDIA
Paper- and print industry: treatment of process- and cooling ...
ByKLASS-Filter GmbH based in Eresing, GERMANY
Water is used in nearly every step of the manufacturing process for a pulp and paper mill. So, of course these facilities have large volumes of wastewater to treat and sludge to dispose of. To save costs, many facilities would like to recover excess pulp fiber from their wastewater to be reused in the production line. For those facilities not recovering fibers, our integrated thickening and dewatering processes are effective with fibrous material and can reduce the volume of sludge and associated disposal ...
BySalsnes Filter based in Namsos, NORWAY