- Home
- Applications
- canada
- flow modeling
Refine by
Flow Modeling Product Applications Available In Canada
15 applications found
By integrating traditional consulting with advanced IoT technologies and real-time network modeling, Smart Water Services enhances infrastructure planning, network monitoring, and system optimization. Their SWIMM (Smart Water Infrastructure Monitoring + Modeling + Management) platform supports water utilities in efficiently monitoring various network parameters like pressure, flow, and water quality in real-time. ...
BySmart Water Services, LLC based in Decatur, GEORGIA (US) (USA)
Prior to the start of the construction phase on any of our projects, Biologics Modular creates a 3D SolidWorks CAD model of the facility and then using SolidWorks Flow Simulation, executes several iterations of airflow to develop a predicted pattern of movement throughout the room in question. This CFD model is then used as a comparison to the smoke test that occurs during FAT (Factory Acceptance Testing). ...
ByBiologics Modular, LLC based in Brownsburg, INDIANA (USA)
Plugged chute or blocked chute detection...If properly implemented, a level sensor / switch or solids flow monitor can indicate a condition consistent with a flow stoppage within a chute, hopper or conveying line. Depicted here are some of the more common methods for plugged chute detection. ...
ByMonitor Technologies, LLC based in Elburn, ILLINOIS (USA)
Premium
Mass flow meters and controllers are important tools in a broad range of catalyst research from measuring the flow through carbon nanotubes to modeling high-pressure, high-temperature catalyst ...
BySierra Instruments, Inc. based in Monterey, CALIFORNIA (USA)
NMR provides direct measurement of key hydrogeologic properties needed to characterize reserves and optimize ...
ByVista Clara, Inc based in Mukilteo, WASHINGTON (USA)
Premium
Covering the whole range of air, gas, liquid, water and steam flow measurement applications, we manufacture vortex, ultrasonic and thermal mass flow meters for pilot plants to model large scale chemical and petrochemical ...
BySierra Instruments, Inc. based in Monterey, CALIFORNIA (USA)
Streamline the design and analysis of stormwater management control strategies for minimizing events such as combined sewer overflows, sanitary sewer overflows, water in basements, surcharging, street flooding and/or rainfall-dependent inflow and ...
ByComputational Hydraulics International (CHI) based in Guelph, ONTARIO (CANADA)
Maintenance, fueling and staging areas generate wastewater whether the vehicles travel on roads, on rails or in the air. Transportation equipment needs maintenance. Facilities that do the maintenance create wastewater with high oil and grease content and solids that need to be removed or reduced before discharge to a POTW. Tenco has successfully treated wastewater from transportation facilities with API type and Clari-Pac C coalescing oil-water separators, Clarif-Float DAF, Skim-Kleen belt oil skimmers and ...
ByTenco Hydro, Inc. based in Brookfield, ILLINOIS (USA)
Kirkstall’s Quasi Vivo® system aims to establish and optimise a human in vitro 3D Blood Brain Barrier (BBB) in an effort to identify important mechanistic pathways for successful biomarker analysis, drug delivery and toxicity ...
ByKirkstall Ltd. based in York, UNITED KINGDOM
Landfill Gas is a mixture of Methane, Carbon Dioxide, and Oxygen that is created by the decomposition of waste stored in landfills. According to the EPA, landfills are the third largest generator of Methane Gas. Methane Gas is the second most prevalent gas to contribute to the Greenhouse Gas (GHG) Effect and for that reason it is important to contain and process the Methane gas in a way that it does not increase the level of GHG’s in the Earth ...
ByThermal Instrument Co. based in Trevose, PENNSYLVANIA (USA)
Design, model and analyze dual drainage systems for flood control in new, existing or combined developments. Surface flows routed overland (major systems such as roads, swales, street sags, storage areas) can easily and accurately be combined with underground flows (minor system, such as sewer ...
ByComputational Hydraulics International (CHI) based in Guelph, ONTARIO (CANADA)
Our flow meters are built to hold up to the harshest environments with standard 316SS and electrical housings that meet most certifications. The fact that our meters are rugged and that our sensors never come into contact with the passing fluid, unlike other flow meters, means that your one time investment will offer you many years of returns. In the event something does happen, all Thermal Instrument Mass Flow Meters come standard with redundant sensors. This feature alone, saves time and money by following a ...
ByThermal Instrument Co. based in Trevose, PENNSYLVANIA (USA)
The Energy Optima 3 module for Production Optimization contains functionality for long-term simulation and scenario calculations. You can run several different optimizations over several years ahead and required granularity with fast calculation times and see how different changes or added units will affect your energy ...
ByEnergy Opticon AB based in Lund, SWEDEN
550W Submersible hydro generator Kit Main advantage: Easy installation and high reliability Drop: 2-5 Meter Flow: 20---50 l / s Model: QS-LZ-12-0.55KW (diving unit) Power: 0.55KW Voltage: 230V / ( 110V, 120V optional ) Speed: 1500rpm or 1800rpm ...
BySmart Energy Corporation based in Nort Dist, TAIWAN
meet governmental regulations, it is important to accurately monitor methane gas production, removal, venting, and burning. Knowledge of both methane flow and temperature at the flare stack can define when CH4 is being emitted to the atmosphere. ...
ByBanner Engineering Corp. based in Minneapolis, MINNESOTA (USA)