- Home
- Applications
- ftir spectrometer
Refine by
Ftir Spectrometer Product Applications
8 applications found
Premium
Lumex Instruments provides user-friendly analytical solution for EN 14078:2014 implementation using FTIR spectrometer InfraLUM FT-08 and powerful SpectraLUM software package. ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
This application note demonstrates the use of ATR-FTIR spectroscopy for the analysis of human serum albumin. An IR5 FTIR spectrometer was used, equipped with a heated ATR accessory, to help tackle the issue of strong water absorption bands masking the IR ...
ByEdinburgh Instruments - TECHCOMP Group based in , UNITED KINGDOM
Premium
Introduction Presence of fatty acid methyl esters (FAME) in diesel fuel or domestic heating fuel (both hereinafter referred to as diesel fuel) is a signal of blending with biodiesel. The control of FAME content in diesel fuel is an essential and actual task because of the need of the right fuel identification and registration of possible FAME impact on engines and fuel systems. To control the compliance one of the most accurate, rapid and simple methods is EN ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Premium
Introduction Benzene is formed in gasoline in the process of oil refining and gasoline production. Determination of benzene in gasoline is an important task, because ben zene and its products reacting with the products of incomplete combustion of gasoline are highly toxic. Moreover, the presence of benzene increases fouling that eventually may damage the engine . Therefore, regulations impose lim it on the content of benzene in gasoline in many countries, and international standards exist to come up to this ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Premium
Introduction One of the most widespread liquid electrical insulating materials is transformer oil. It is used to fill the pores in the fiber insulation and the space between the windings, thereby increasing the dielectric strength of the insulation and improving the heat removal from the windings and the core of a ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
The company’s entry into the electronic specialty gas market originated in 1994-95 as a consequence of the semiconductor industry’s demand for increasingly higher purity gases from the major gas producers. The issue was then and remains today to be primarily moisture impurity levels in the cleaning, etching, and treatment gases used in wafer production. In that earlier period when common wafer sizes were 6” and 12”, the semi industry required moisture concentrations to be 250 to 500 ppb or better; with each year ...
ByCIC Photonics based in Albuquerque, NEW MEXICO (USA)
Comparison of Technologies A gas chromatograph (GC) has traditionally been the technology of choice for laboratory analysis of gas samples. GCs have been used for over 50 years in the qualification and quantification of complex mixtures of gases. The techniques and methodology required to run GCs are often a pre-requisite for any laboratory technician. Recent developments in Fourier Transform Infra-Red (FTIR) gas analysis has enabled this technology to start to replace GCs in the ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
Identifying different types of plastic to ensure efficient waste management is one tactic for reducing plastic pollution in our environment. In this application note, we discuss how the ATR-FTIR Spectroscopy using the IR5 can identify plastics for rapid ...
ByEdinburgh Instruments - TECHCOMP Group based in , UNITED KINGDOM