- Home
- Applications
- gas analysis device
Refine by
Gas Analysis Device Product Applications
68 applications found
Carbon fibre is a unique material and is found in many high-tech industries such as sports car manufacture, wind turbine blade construction and sports equipment. The production of carbon fibre from acrylic fibre involves the baking of the fibre in ovens, which gives emissions of gas species including Hydrogen Cyanide (HCN). Protea’s range of gas analysers can provide a solution for the periodic or continuous measurement of gases from carbon fibre production in order to give reportable emissions values as ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
ByADEV SRL based in Cesano Maderno (MB), ITALY
Sampling and analysis of fire effluents is an important part of assessing both the environmental impact and the threat to life caused by fires. Detailed knowledge about the composition and concentration of fire effluents is required to gain a good understanding about the potential impacts of fires and for efforts to diminish these impacts. Testing the composition of these fire effluents presents a challenge for the analytical equipment used to measure the gases. The amount of species and concentrations of interest ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Commonly, activated carbon beds are used as abatement systems on plant, with emissions being reduced by adsorption onto the bed. The efficiency of any abatement system is critical to its operation, not just in ensuring emissions are reduced as much as possible, but an efficient bed has cost savings for the ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
ByADEV SRL based in Cesano Maderno (MB), ITALY
CIC Photonics first applied its IRGAS technology to semi-gases when a major semiconductor equipment manufacturer, Applied Materials, requested a demo of its capability to monitor gas quality for epitaxial reactor applications; that was in year 2000. The IRGAS System met all of the technical requirements, which included ppb sensitivity for moisture as an impurity, gas cell chemical resistance to both acid and basic semi-gases, and fast concentration tracking time ...
ByCIC Photonics based in Albuquerque, NEW MEXICO (USA)
In a complex petrochemical facility there may be many thousands of potential leaks paths. Some may be leaking but most will not. Using an infrared Gas Detection camera allows the user to examine many potential leaks sources in a short time and from a distance. The EPA acknowledged gas imaging cameras, such as Opgal’s EyeCGas®, as an approved Leak Detection and Repair (LDAR) Method 21 alternate work practice ...
ByOPGAL based in Karmiel, ISRAEL
Pollutant emissions from industrial smoke stacks are a major national concern due to both health concerns and climate change. As a consequence, there are at least tens of gas analyzer manufacturers in the U.S. alone that compete in that market and have done so for years. What CIC Photonics brings to that competitive field is its expertise derived from its Combustion Efficiency Solution and its high performance IRGAS Systems. The IRGAS-CEM provides real-time and simultaneous measurements of the multitude of ...
ByCIC Photonics based in Albuquerque, NEW MEXICO (USA)
The nation has stockpiled thousands of cylinders and canisters of toxic and deadly chemical weapon agents, including mustard gas (HD), sarin (GB), tabun (GA), and V-agents. Most of these CWAs are stored at DOD facilities around the country and many have been in storage for years and years. As a consequence, DOD requirements specify that the stockpiles have to be monitored regularly for leakages to prevent release to the environment and exposure to ...
ByCIC Photonics based in Albuquerque, NEW MEXICO (USA)
Inert gas blanketing is a vital process employed in various industries such as Additive Manufacturing, Solder Reflow Ovens, Gloveboxes and many more to safeguard volatile, combustible, or perishable products from undesirable reactions like oxidation or ...
ByCambridge Sensotec Limited based in St. Ives, UNITED KINGDOM
Carbon Capture and Storage (CCS) is an emerging method of reducing greenhouse gas (GHG) emissions of power plants. In a process called ‘scrubbing’, the carbon dioxide emissions can be absorbed into chemical solvents consisting of amines or carbonates. Scrubbing is a well-established method of carbon capture, with virtually every commercial CO2 capture plant in operation using this process. In the process, the first step is the removal of impurities from the flue gas, such as hydrocarbons and oxides of ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
The company’s entry into the electronic specialty gas market originated in 1994-95 as a consequence of the semiconductor industry’s demand for increasingly higher purity gases from the major gas producers. The issue was then and remains today to be primarily moisture impurity levels in the cleaning, etching, and treatment gases used in wafer production. In that earlier period when common wafer sizes were 6” and 12”, the semi industry required moisture concentrations to be 250 to 500 ppb or better; with each year ...
ByCIC Photonics based in Albuquerque, NEW MEXICO (USA)
Recent decades brought a rapid growth in the global demand for energy. This trend is accurate for both developed as well as developing countries. Electrical power is a key source of energy for the vast majority of the world population. Although the usage of renewable energy is on the rise, the majority of electric power production worldwide is still based on conventional methods utilizing coal, oil and gas as its fuel to power the ...
ByOPGAL based in Karmiel, ISRAEL
AN0016 – Automated multi-species flux measurements with eosAC and Gasmet DX4015/4040 Portable FTIR Gas Analyzers ...
ByEosense Inc based in Dartmouth, NOVA SCOTIA (CANADA)
Coal gasifier: The coal gasifier can be divided into four modes by the movement pattern of the coal in the gasifier: fixed bed (moving bed), fluidized bed, entrained bed and molten bed. While it can be summarized to atmospheric and high pressure styles according to the gasification operating pressure. Based on the feeding method, the coal gasifier contains solid and liquid feeding manners. In the light of the residue-discharge mode, it can be classified into solid and liquid patterns. In industry, the typical ...
ByEnviro Solutions Technology Co.,Ltd based in Wuhan, CHINA
Modern production method of nitric acid production may lead to generation of several different gaseous emission components, such as nitrogen oxides (NOx), ammonia NH3 and nitrous oxide N2O. Nitrogen monoxide is an intermediate gaseous product in manufacturing of nitric acid HNO3. NO is formed in a catalytic reaction between ammonia and molecular oxygen O2. But undesirable side reactions may result in formation of nitrogen dioxide NO2 and nitrous oxide N2O. The NO and NO2 emissions can be reduced by use of ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Solar technology as a renewable energy technology is spreading around the world, with major manufacturing operations occurring in China, Germany, Spain, and the U.S. For solar photovoltaics, specialty chemicals are required for the production of the photovoltaic ...
ByCIC Photonics based in Albuquerque, NEW MEXICO (USA)
CIC Photonics has made its mark with several R&D institutes where research is underway to determine the optimum thermodynamic performance of new turbine engine designs combined with new diesel fuel formulations. This sophisticated IRGAS technology has included not only a basic FTIR gas analyzer but also analyzers for H2, O2, THC, and a powder meter all integrated into a comprehensive IRGAS ...
ByCIC Photonics based in Albuquerque, NEW MEXICO (USA)
The electrical industry plays a crucial role in powering modern societies, providing energy for various sectors, including residential, commercial, and industrial applications. Within this industry, the handling and management of sulfur hexafluoride (SF6) gas is of utmost ...
ByCambridge Sensotec Limited based in St. Ives, UNITED KINGDOM
One such groundbreaking innovation is the Rapidox SF6 gas analyser, developed and manufactured by Cambridge Sensotec. Combining state-of-the-art capabilities with exceptional reliability, this cutting-edge device has revolutionised gas analysis in the medical sector, offering valuable insights that positively impact patient outcomes. ...
ByCambridge Sensotec Limited based in St. Ives, UNITED KINGDOM