- Home
- Applications
- gas detection system
Refine by
Industries served
- Oil, Gas & Refineries
- Manufacturing, Other
- Medical / Health Care
- Monitoring and Testing
- Chemical & Pharmaceuticals
- Food and Beverage
- Energy
- Mining
- Pulp & Paper
- Water and Wastewater
- Environmental
- Air and Climate
- Aerospace & Air Transport
- Construction & Construction Materials
- Automobile & Ground Transport
- Defense
- Metal
- Printing
- Health and Safety
- Government
Gas Detection System Product Applications
102 applications found
Liquefied natural gas owners require improved routine monitoring of facilities for safety, economic and regulatory reasons. Leaking LNG can cause explosions leading to loss of life and property. Loss of product through undetected leaks dramatically reduces a pipeline operator’s profitability. Traditional gas detectors are slow to reach and require a labour intensive process to keep maintained. IR detectors have been used but with limited success because of cross interference from other atmospheric ...
ByBoreal Laser Inc. based in Edmonton, ALBERTA (CANADA)
InterceptIR, a version of our XplorIR gas detector, was designed for integration onto a variety of robotic platforms using the provided power and communication. This pairs the gas identification capability of the InterceptIR with the remote control features of the unmanned system, providing safer site characterization. The InterceptIR has a low SWaP (Size Weight and Power) payload and the ability to identify over 5,600 gases and vapors ...
By908 Devices Inc. based in Burlington, MASSACHUSETTS (USA)
Hydrogen Cyanide (HCN) is a highly toxic compound that is a byproduct of many industrial processes. Existing HCN point sensors are maintenance intensive, slow to respond and provide limited coverage. Many HCN sensors do not work reliably in hot or cold weather, or in humid environments. Our technology can be used for fixed monitoring applications or for temporary protection of workers during construction ...
ByBoreal Laser Inc. based in Edmonton, ALBERTA (CANADA)
We supply handheld and fixed VOC detectors using our PID technology for the construction industry. Here you can find the most appropriate gas detection solution to best meet your ...
ByION Science Ltd. based in Royston, UNITED KINGDOM
Paints, coatings, and adhesives manufacturing processes will contain elevated VOC concentration but there are many other manufacturing processes where VOC exposure is a considerable hazard to health. Any production or printing line will contain dangerous VOC that can be measured using our fixed or portable gas ...
ByION Science Ltd. based in Royston, UNITED KINGDOM
Coil Coating is a high-temperature solvent vapor monitoring application in which rolls of aluminum or steel are coated with a color finish, oven cured to desired specs and sold to makers of cans, rain gutters, home appliances, building & automotive products and other fabrications. Coil coating requires the use of our PrevEx Flammability Analyzers to monitor the flammability of the solvent vapor driven off during the drying process. PrevEx analyzers accurately measure solvent mixtures and can withstand the ...
ByControl Instruments Corporation (CIC) based in Fairfield, NEW JERSEY (USA)
Sewerin manufacture a wide range of gas warning detectors suitable for many different gas monitoring, detection and warning applications. Sewerin gas detectors are used to monitor and warn of the dangers from explosive, toxic and asphyxiating gases. ...
ByHermann Sewerin GmbH based in Gütersloh, GERMANY
Solvent based inks in different colors and patterns are applied to paper, plastic, film and foil substrates. Finished products include all sorts of wrapping paper, wall covering, candy wrappers, flexible food packages, shrink labels, high quality magazines and many, many more. These industries employ ovens or dryers to remove the solvents from the finished product. The key hazard is an explosion from the buildup of solvent vapors in the oven or dryer atmosphere. This buildup could occur by a malfunction in the ...
ByControl Instruments Corporation (CIC) based in Fairfield, NEW JERSEY (USA)
Premium
Oil and natural gas are part of everyday life. Together, these fossil fuels represent 86 % of global energy demand. Products produced from oil and gas are used throughout the world as fuel (such as gasoline and diesel fuel), or as building blocks for the petrochemical and chemical industries. The process to extract, transport and refine oil and gas is complex and wrought with danger to workers and to assets. One of the most dangerous is the risk of fire or explosion due to the presence of flammable gases and ...
ByTeledyne Gas and Flame Detection based in Arras Cedex, FRANCE
The Oil and Gas industry can be a dangerous environment with frequent potential exposure to hazardous gas. Safety is of upmost importance to keep people and the environment free of harmful gases. Therefore, gas detection instrumentation has been regulated and required by occupational safety organizations for the prevention of unsafe incidents. MetCam is taking traditional gas detection to the next level. MetCam was designed to enhance the safety features of traditional gas ...
ByCI Sensing, division of CI Systems based in Migdal HaEmek, ISRAEL
Flammable & combustible liquids are found in virtually every industrial plant. The quantities of these can vary from a few ounces in aerosol cans to several thousand gallons in bulk storage tanks. The principal hazard associated with storage is the accidental discharge or release of the flammable or combustible material into the surrounding ...
ByControl Instruments Corporation (CIC) based in Fairfield, NEW JERSEY (USA)
The Oil & Gas segment is the biggest market for gas detection and analysis equipment. It is common to describe this industry based on the product flow, from “Upstream” exploration and extraction location toward a “Downstream” flow, which end up at the end user home or business. Throughout the Oil and Gas industry, leaks are a real ...
ByOPGAL based in Karmiel, ISRAEL
Premium
Gas detection requirements for power generation can vary widely based on the fuel source, which includes coal, oil, natural gas and nuclear. ...
ByTeledyne Gas and Flame Detection based in Arras Cedex, FRANCE
Sewerin gas detection instruments are used to identify and quantify gas leaks in natural gas distribution networks. Designed to be intuitive to use for many different tasks in the gas utility industry the infrared sensors ensure accuracy and sensitivity. Our equipment is used in many countries by all the world's major gas supply companies. ...
ByHermann Sewerin GmbH based in Gütersloh, GERMANY
The pharmaceutical industry poses many chemical hazards which can be detected using our PID technology. Our range of personal, portable of fixed VOC detectors will give an unrivalled solution when you want to detect a mixture of uncommon hydrocarbons. Use our tried and tested VOC detectors if you want to measure VOC concentration in a production facility or storage ...
ByION Science Ltd. based in Royston, UNITED KINGDOM
Our PID based instruments are able to measure VOC in concentrations as low as 1 PPB. This means that our VOC detectors are ready to be used in the University and Laboratory environment to detect VOC at low levels, this can be critical to the quality of work / research taking place. Aside from safety and quality assurance based instruments, ION Science also offers a range of test and inspection instruments for this industry. ...
ByION Science Ltd. based in Royston, UNITED KINGDOM
Biocidal chemicals like peracetic acid are very effective at killing bacterial contamination on meat, poultry and work surfaces. But, for those people who work in processing plants where large amounts of peracetic acid is used every day there is a significant risk of over-exposure. ...
ByChemDAQ, Inc. based in Pittsburgh, PENNSYLVANIA (USA)
Most sources of fugitive emissions are from multiple points rather than single point sources. So, open path area or perimeter monitoring provides more meaningful fugitive emissions data than an array of point sensors or a program of grab sampling. Point measurements may underestimate emissions because of missing locations with high gas concentrations, or conversely overestimate because they are located in areas of high concentrations. Grab sampling programs typically check only a small percentage of potential leak ...
ByBoreal Laser Inc. based in Edmonton, ALBERTA (CANADA)
Our PID instrumentation is widely used for detecting VOCs at low concentrations within the water and wastewater ...
ByION Science Ltd. based in Royston, UNITED KINGDOM
The Oil and Gas industry pose many potential risks to workforce, workplace and the environment. Hazardous gas emissions are prevalent during production and processing operations with exposure to benzene being a significant ...
ByION Science Ltd. based in Royston, UNITED KINGDOM