- Home
- Applications
- gas standard
Refine by
Gas Standard Product Applications
28 applications found
Premium
Over the time or according regulations and devices requirements, calibration operations are required for each measured compound. As low concentration gas standards are expensive, may be unstable or not storable, like for ozone, on-site reference gas generation with Sonimix calibrators reduce costs, logistics troubles and keep analysers performances at their higher ...
ByLNI Swissgas based in Versoix, SWITZERLAND
Premium
H2S/Total Sulfur analyzers for Natural Gas pipeline integrity monitoring. During the extraction and processing of raw Natural Gas, midstream companies are required to track the level of Hydrogen sulfide (H2S) and Total Sulfur (TS). Accurate analysis of H2S in Natural Gas is of high importance to reach natural gas standard and to avoid equipment corrosion, as well as the decrease of heating ...
ByChromatotec based in Saint-André de Cubzac, FRANCE
Permeation tubes emits the compound with a constant rate and constant temperature, permeation rate have a exponential dependence from the temperature: it increases around 7% for a increase of 1°C. To generate gas standard with accuracy is necessary a thermostation with accuracy ±0,1°C. ...
ByFine Metrology S.r.l. based in Spadafora (ME), ITALY
The semiconductor industry and the consumer electronics industries use our high purity gases and gas mixtures for numerous applications including ion implantation, plasma etching, and certain chamber cleaning processes. Gas mixtures and gas mixture standards are critical for instrument calibration. ...
BySpecgas Inc. based in Warminster, PENNSYLVANIA (USA)
Specialty gas mixtures and certified multi component calibration gas mixtures used for research, analysis and control. ...
ByAlyTech based in Juvisy sur Orge, FRANCE
Premium
Our systems are custom built, computerized, mass flow controller based gas calibration systems which allow you to dilute a single high concentration cylinder of span gas to low levels for the calibration of gas analyzers. The standard Series 4040 can generate blends down to a 10,000:1 ratio with standard MFC sizes, and more with custom options. ...
ByEnvironics, Inc. based in Tolland, CONNECTICUT (USA)
Premium
Semiconductor manufacturing relies on ultra-high purity of the gases used throughout the process. This includes the gases used in atomic layer deposition as well as high levels of accuracy for residual gas ...
ByEnvironics, Inc. based in Tolland, CONNECTICUT (USA)
CIC Photonics’ extensive experience with gas analysis has also included what the industry refers to as Specialty Gases, as distinguished from Semi Gases, Electronic Specialty Gases, and Industrial Gases. ...
ByCIC Photonics based in Albuquerque, NEW MEXICO (USA)
Premium
While the applications may be standard, the performance and quality of our systems are anything but. Every unit is engineered with precision and built to deliver exceptional reliability and accuracy, far exceeding typical ...
ByEnvironics, Inc. based in Tolland, CONNECTICUT (USA)
Premium
Scientists these days believe that the natural resources of oil and gas are not quite as finite as thus far assumed. These resources are likely to remain available considerably longer than hitherto ...
ByBD|SENSORS GmbH based in Thierstein, GERMANY
Servomex has set the standard for gas analysis in the Industrial Gas (IG) market for the last 60 years. From air separation to gas bottling and transportation, we've pioneered monitoring technologies and ground-breaking systems solutions that deliver accurate sensitivity, unparalleled performance and reduced cost of ...
ByServomex - a Spectris Company based in Sugar Land, TEXAS (USA)
Wastewater treatment applications contain some of the most corrosive environments on the planet, thanks in large part to high concentrations of hydrogen sulfide (H2S). Potentially combustible levels of methane can also create an explosion hazard, forcing the need for corrosion-resistant, explosion proof HVAC equipment. Fortunately, we address those needs with our InPac line configured with preselected options to provide your application with optimal ...
BySpecific Systems based in Tulsa, OKLAHOMA (USA)
Custody Transfer in the oil and gas industry refers to the transactions involving transporting a product from one operator to another. The custody transfer may occur at a transfer from marine vessel to a tank, a tank to tank, tank to railcar or truck, pipeline to tank, etc. But if liquid or gas fluids are transferred via pipeline the transaction is usually measured with some type of flowmeter system. The flowmeter location is where the fluid is being measured for change of ownership and therefore the custody ...
ByThermoProbe Inc. based in Pearl, MISSISSIPPI (USA)
Hydrochloride Acid chimney sampling according to norm UNI-EN 1911 DLgs.152-2006. The system concerns a heated sonde including a set of glass tools to sample hydrochloride acid sampling gas getting in touch without affecting any metal part. A special impinger’s support deviceis placed outside the sonde, next to the heated recipient holding the filter holder. This process avoid forming condense in the sampling chain with the loss of the specimen. Normative allows two different kinds of sampling, the first one ...
ByAMS Analitica based in Pesaro, ITALY
USP37 Medical Gas requires a specific, selective and positive identification test using a paramagnetic signal. Regular analysis of medical gas is required to ensure that the oxygen concentration is NLT 99.0% volume. ...
ByIndustrial Physics Product Integrity Limited based in Thame, UNITED KINGDOM
Whether for industrial or environmental reasons, analytical constraints have evolved significantly over the past two decades. Oil refineries and gas use many analyzers (eg GC) in their laboratories; whether control laboratories, production facilities or R&D labs for the Oil & Gas industry. These analyzers are required to provide accurate and reliable results continuously to conform to the specifications of ASTM or EN standards. The GASMIX™ ...
ByAlyTech based in Juvisy sur Orge, FRANCE
Thermal Conduction Heating (TCH) is applicable in fractured rock and other complex formations such as: Tight and fractured clays, Saprolite, Shale, Sandstone, Limestone, Dolomite, Fractured igneous and metamorphic rock, Permeable basalt, Karst ...
ByTerraTherm - a Cascade Company based in Gardner, MASSACHUSETTS (USA)
Many laboratories conduct air testing and monitor industrial emissions to meet environmental standards. Current standards like EN 14181 and ISO 14385 describe the quality assurance procedures for calibration and ongoing quality control ensuring proper operation of automated measuring systems (AMS) to measure emissions of greenhouse gases. ...
ByAlyTech based in Juvisy sur Orge, FRANCE
Aroma real-time quantification with PTR-MS. Rapid screening for complex aroma systems. Rich chemical fingerprints due to soft ionization. Real-time sampling: high throughput. Ideal for chemometric data-mining methods. ...
ByIonicon Analytik Ges.m.b.H. based in Innsbruck, AUSTRIA
Over the past few years there has been an enormous surge in interest in the application of low-cost sensors to measurements of air pollutants by educators, citizen scientists and members of various groups interested in air pollution levels in their own ...
By2B Technologies based in Boulder, COLORADO (USA)