- Home
- Applications
- incineration process
Refine by
Incineration Process Product Applications
22 applications found
Premium
ENVEA’s long association with the Incineration Industry includes supporting Process Operators to meet environmental obligations and the requirement for high performance instrumentation with quality assurance features for compliance reporting. In addition to the importance of regulatory compliance, the control and treatment of emissions from Incineration processes represents a significant proportion of overall costs, therefore, quality data ...
ByENVEA based in Poissy, FRANCE
Not all flue gasses are in large quantities present in the flue gas of the incineration process. The EU incineration law takes care that it is possible to operate a hazardous, medical or domestic waste incinerator even in the middle of a ...
ByIgniss Energy based in Korytnica, POLAND
The fundamental ingredient in concrete is portland cement. The cement manufacturing process requires a great deal of energy to heat the mixture of raw materials in a cement kiln. ...
ByCR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA)
Robust air pollution control systems are required in the aggressive manufacturing processes of chemical manufacturing and incineration processes. Wet pollution control technologies are ideal for these tough environments. Variable-throat venturis provide constant particulate emissions control even in varying process conditions. WESPs are often required to meet fine particulate emission regulations, and absorption stages are added to the system to ...
ByAirPol based in Pittsburgh, PENNSYLVANIA (USA)
Auburn FilterSense provides reliable particulate monitoring and fabric filter control solutions to many types of incineration facilities, including trash burning, medical waste, crematory, and process incineration. High process temperatures are an easy challenge for Auburn FilterSense particulate sensors, as they are uniquely passive and thus free of electronics. For stack compliance and US-EPA PS 11, Auburn FilterSense offers PM CEMS utilizing ...
ByAuburn based in Beverly, MASSACHUSETTS (USA)
Premium
Waste incineration power generation is a solid waste treatment which is harmless, waste reducing, and resource recycling. However, in the process of waste incineration it will generate many toxic and hazardous gases, especially acid gases (SO2 and HCl) which would cause serious pollution to the environment. ...
ByHangzhou Chunlai Technology CO., Ltd. based in Hangzhou, CHINA
Premium
Their major sources in the atmosphere include industrial processes, vehicle exhausts, waste incinerations, and domestic heating emissions. ...
ByChromatotec based in Saint-André de Cubzac, FRANCE
Pharmaceuticals are now shown to be found in surface, ground, and drinking waters around the world. This could create some potentially damaging environmental effects. Minuscule concentrations of chemicals known as endocrine disruptors, often found in pharmaceuticals, are having detrimental effects on aquatic animals and possibly on human health and ...
ByInciner8 Limited based in Southport, UNITED KINGDOM
The pharmaceutical industry produces a diverse array of products using a wide array of production methods, but this means that the industry also produces a wide array of waste streams. Clean-in-place (CIP) wastes contain active pharmaceutical ingredients, spent solvent wastes and bio solids. Some of these wastes can be treated by traditional wastewater treatment system, but others require ...
BySCFI Gr Limited based in Bishopstown, IRELAND
Companies requiring treatment of any waste-water emitted by a manufacturing process – commonly use incinerators for air pollution control ...
ByCatalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA)
Do you provide healthcare solutions that inform consumer lifestyle? BeFC technology provides point-of-care health monitoring to enhance lifestyle whilst protecting the ...
ByBioenzymatic Fuel Cells (BeFC) based in Gières, FRANCE
Regulation CE, No 1774/2002 classifies animal by-products into three categories based on their potential risk to human health, animal health, and the environment then defines how each category must or may be ...
ByEcodas based in Roubaix, FRANCE
Methane gases used for electric generation or pipeline gas synthesis via membrane or pressure swing adsorption (PSA) processes – commonly use incinerators for air pollution control ...
ByCatalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA)
These byproducts can be dangerous, and if they cannot be used for other processes, they are often incinerated, causing large amounts of hazardous substances which end up in the flue ...
ByEnvibat Systems AB based in Skellefteå, SWEDEN
Combustion air blower applications are common in power plants and many process manufacturers across industries that require combustion to burn fuels such as natural gas, oil, and wood in boilers, incinerators, dryers, kilns, ovens, furnaces, and process ...
ByAirPro Fan & Blower Company based in Rhinelander, WISCONSIN (USA)
Waste can be used to generate electricity and heat, but different types of waste require different types of processing before incineration in the power plant. The versatile TANA Shark shredder makes it possible to process many different types of waste materials with a single machine. ...
ByTana Oy based in Jyvaskyla, FINLAND
This monitor is certified to EN 15267 part 3 QAL 1 for all industrial processes including waste incineration. It offers outputs in Transmission, Opacity and mg/m3 (when calibrated against a Standard Reference Method). ...
ByCodel - a Forbes Marshall company based in Bakewell, UNITED KINGDOM
Since long, LIST KneaderReactors are in successful operation in many industrial recycling processes where valuable products are recovered and the actual wastes are treated such that they are ready for disposal or incineration. Most of these thermal processes have in common, that during the treatment, the product undergoes various states from liquid via pasty to dry. ...
ByLIST Technology AG based in Arisdorf, SWITZERLAND
In many industrialized nations it is common practice to use incineration methods for waste disposal. There are also ways to recover energy from the process. However, operating an incinerator requires strict adherence to environmental regulations. Hazardous, clinical and waste to energy incinerators can benefit from our EcoSorb range of activated carbon. ...
ByJacobi Group based in Kalmar, SWEDEN
Venturi scrubbers with FORCE FLUX Condensation technology and Wet Electrostatic Precipitators for industrial, municipal, sewage sludge and pathological waste incinerators to remove micron, submicron particulate, heavy metals and acid gases. ...
ByBionomic Industries Inc based in Mahwah, NEW JERSEY (USA)