- Home
- Applications
- level indicator
Refine by
Level Indicator Product Applications
30 applications found
Keep the cost low, but reliably detect the high level of grain in forty-five (45) storage bins. The lowest cost level indicator / sensor for this type of application is typically a Tilt Switch. ...
ByMonitor Technologies, LLC based in Elburn, ILLINOIS (USA)
A company that processes silica sand needed a point level indicator to monitor and indicate a high sand level in a settling tank. ...
ByMonitor Technologies, LLC based in Elburn, ILLINOIS (USA)
“How can I detect the full level condition of bins in an assembly fill line?” A manufacturer of industrial chemicals required a high level detector to indicate the full level condition in small tote bins during the filling operation. They wanted to use a single level detecting probe and share it among many bins as they are filled. ...
ByMonitor Technologies, LLC based in Elburn, ILLINOIS (USA)
Premium
A wide range of measurement technologies are available for monitoring process parameters such as the moisture content of fuels (coal), blast furnace efficiency, the continuous monitoring of sinter dust transfer and silo level indication. In addition, instruments to monitor and identify potential faults in dust collector units and others for the measurement of process gasses not only help protect the environment but provide reliable data to reduce process downtime and operational ...
ByENVEA based in Poissy, FRANCE
Lagoon level measurement can sometimes be difficult to install and get right. However, accurate and reliable readings of lagoon levels help to ensure that readings taken can be compared to high/low level alarms set within the control system and aids companies with water monitoring, reporting, and compliance. Non-contacting technology means that engineers don't have to get out into the lagoon to monitor water levels and can have an instant ...
ByPulsar Measurement based in Birmingham, UNITED KINGDOM
External Liquid Level Gauge for Chlorine tank measure / no need drilling the tank. Non intrusive Measure range: 20M Power supply: DC 24V Accuracy: 0.1% Power: 10W Signal output: 4-20mA Communication Protocols: RS-485 HART MODBUS Environment temperature: -20-70 degree Liquid temperature: -50-100 degree Explosion proof class: ExdIICT6 Protection class: IP67 www.sx-sk.com Jilina Lee Skype: jilina1986 [email protected] Cell: 0086 15809274235 Sonar Technology, External liquid ...
ByShaanxi SK Electronic Technology Co.,Ltd. based in Xi’an City, CHINA
Silo level and solid flow indication can become quite tricky, especially when things like high dust levels interfere with the atmospheric conditions of a process. mmWAVE Radar can give continuous level monitoring in silos, without being compromised by these factors. Pulsar guard can give an indication of the change in flow rate of solids though ducting/conveyors to indicate that something within the process ...
ByPulsar Measurement based in Birmingham, UNITED KINGDOM
Depending on the regulations, a steam boiler must be equipped with one or more direct and/ or indirect level gauges. With direct level gauges, the liquid level can be seen directly through a glass or mica window. The use of a transparent level gauge with background illumination gives operating staff a clear separation between the water and steam zones even when viewed at a relatively long distance. Bicolour level gauges (black and white or green and red) are very suitable for camera transmission to the measuring ...
ByIGEMA GmbH based in Münster, GERMANY
However, the breaking of wast glass did indicate high levels of UFP exposure. By adapting the work instructions this could be significantly reduced. ...
ByOxility BV based in Breda, NETHERLANDS
Non-contacting tank level monitoring can offer some serious advantages, especially when looking at Ferric dosing tanks, for many health and safety reasons. This means staff doesn't have to put themselves at risk by climbing to the top of a tank for an indication of level. Pulsar has a range of technologies that are suitable for this application. Using Pulsar radar technology it is possible to view the level from outside a plastic tank, preventing ...
ByPulsar Measurement based in Birmingham, UNITED KINGDOM
“Flexible” High Level Detection in Finished Feed Silos at Hubbard Feeds in Mankato, MN ...
ByMonitor Technologies, LLC based in Elburn, ILLINOIS (USA)
Premium
Tracking inventory for valuable bulk resins, powders, flakes, and regrind can be a daunting task for plastic processors. BinMaster makes tracking easier with continuous and point level sensors to monitor material in silos, hoppers, and granulators. Measurement data is sent to your phone or PC. Optimize inventory turnover, reduce carrying costs, gain real-time visibility for resin levels across multiple plants with BinMaster advanced polymer handling sensors. Perfect for vendor managed ...
ByBinMaster Sensors and Technologies LLC based in Lincoln, NEBRASKA (USA)
The control and measurement of level and flow play an important role in industrial production, In the liquid chlorine production process, the chlorine measuring tank requires to be frequently changed, and the packaging tank does the repeated filling job. In the meantime, as a highly toxic substance, chlorine in the tank has to be strictly leak-proof to prevent harm to ...
ByShaanxi SK Electronic Technology Co.,Ltd. based in Xi’an City, CHINA
Premium
BinMaster helps ag cooperatives, millers, farmers, and agronomy companies affordably automate grain, seed, feed, fertilizer, and chemical inventory. Whether it's managing multiple vessels or sites, projecting future orders, optimizing storage capacity, or ensuring the availability of essential ingredients, BinMaster will make your job ...
ByBinMaster Sensors and Technologies LLC based in Lincoln, NEBRASKA (USA)
Premium
Concentration of zinc in tap water can increase as a result of its dissolution from pipes. Also, elevated levels of zinc may be an indicator of increased concentrations of other toxic metals; thereby zinc in water analysis is an essential analytical task. ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
ARTeMIS Modal Pro has a series of plugin modules designed for Structural Health Monitoring purposes. All modules are designed to analyse and present the health of a monitored structure in various manners, and they all rely on the same common data manager base module. This module administrates the recorded measurement files as well as the results obtained during a periodic ...
ByStructural Vibration Solutions A/S based in Aalborg East, DENMARK
The level of seed in treater bins needs to be monitored closely to help control the filling and discharging so that a continuous treating operation can be implemented. A level sensor is needed that will detect and measure the level of the seed accurately, quickly and reliably. ...
ByMonitor Technologies, LLC based in Elburn, ILLINOIS (USA)
Flexar Continuous Level Systems Successful on Cement Powder and Flyash at Batavia Concrete. ...
ByMonitor Technologies, LLC based in Elburn, ILLINOIS (USA)
In industrial cooling towers, bacterial growth on surfaces (biofilm) causes serious problems, both contributing to the deterioration of materials and, most important, increasing the risk of harmful microbiological contaminations (e.g. Legionella pneumophila). For these reasons, large amounts of chemical substances (biocides) are used to limit microbiological growth in such ...
ByAlvim Srl based in Genova, ITALY
Monitoring storm events gives water operators the ability to stay ahead of wastewater overflows, reservoir capacity issues and environmental hazards. The Bluetick Water Management System (WMS) gives you advanced warnings of flood activity and stormwater metrics to prepare for major weather events that could shock your water utility ...
ByBluetick, Inc. based in Greensboro, NORTH CAROLINA (USA)