- Home
- Applications
- liquid separation
Refine by
Liquid Separation Product Applications
135 applications found
WesTech enjoys more than 40 years of experience in municipal wastewater treatment. WesTech starts with creating value and ensuring success for engineers, contractors, and plant operators. Customers praise not only WesTech’s equipment, but also their overall experience with WesTech’s ...
ByWesTech Engineering, LLC based in Salt Lake City, UTAH (USA)
Filters come in all shapes, sizes, and configurations. WesTech will help you select the right filter. This might include a cluster filter with self-generating backwash, packaged steel tank filters, pressure filters, or even a membrane filter. Selecting filter internals such as underdrains, washtroughs, and media is just as important, and WesTech has more options and expertise than anyone else in the ...
ByWesTech Engineering, LLC based in Salt Lake City, UTAH (USA)
This system is providing remarkable solid/liquid separation results. Data showed reduction of TSS by 98% and of BOD by 30% to 50%. ...
ByHeron Innovators, Inc. based in Rocklin, CALIFORNIA (USA)
The advantages of paste thickeners in tailings circuits have been well-established for most minerals. The type of paste thickener underflow generally used for surface stacking of tailings is called “thickened tailings.” Thickened tailings are a suspension of solids which are relatively non-settling and non-segregating and which have a higher concentration and viscosity than that of conventional tailings. Common applications include a thickener with underflow pumps that are typically centrifugal and ...
ByWesTech Engineering, LLC based in Salt Lake City, UTAH (USA)
Hiller high-performance decanter centrifuges provide world-class standards for a wide variety of municipal and industrial wastewater treatment applications including: Primary waste stream liquid-solid separation, Dewatering of municipal and industrial sludges, Dewatering the concentrated sludge off clarifier bottoms, Dewater the sludge off DAF systems, Thickening and dewatering of biological ...
ByHiller Separation and Process based in Lampasas, TEXAS (USA)
It provides municipal clients and contractors a diverse range of solid liquid separation and biological treatment ...
ByHydroflux Pty Ltd based in Sydney, AUSTRALIA
Aeration is an effective and low-cost solution to oxidize iron and manganese. It can also provide high-efficiency removal of gases such as hydrogen sulfide, carbon dioxide, methane, and volatile organic carbons, which results in better process performance and/or improvement of taste and ...
ByWesTech Engineering, LLC based in Salt Lake City, UTAH (USA)
A tomato cannery needed additional treatment to remove suspended solids from their process wastewater. At Heron Innovators, we specialize in the design, development, fabrication, and installation of highly efficient SAF® systems. A pilot trailer was placed at the plant and ran for two months during the 2012 processing season, proving the system’s capabilities and setting the stage for the customer’s order for a complete system to be ...
ByHeron Innovators, Inc. based in Rocklin, CALIFORNIA (USA)
The inserts made of the Pro-SLOT® wedge wire screens are perfect for solid and liquid filtering and separation processes in, among others, processing water and industrial wastewater treatment, water treatment, and sugar and starch production. ...
ByProgress Eco S.A. based in Tuczepy, POLAND
Mine backfill is defined as the material used to fill the cavities (i.e., stopes) created by underground mining. Backfilling can be a means to dispose of sludge and/or tailings which may contain hazardous materials and to reduce surface environmental impacts by storing tailings underground. Alternately, backfilling with nonhazardous materials can allow for mining productivity improvements. To these materials are added a variety of fillers such as fly ash, course sand, or gravels along with a binder, such as ...
ByWesTech Engineering, LLC based in Salt Lake City, UTAH (USA)
The process usually consists of finely chopping the edible fat materials (generally fat trimmings from meat cuts), heating them with or without added steam, and then carrying out two or more stages of centrifugal separation. The first stage separates the liquid water and fat mixture from the solids. The second stage further separates the fat from the ...
ByElgin Separation Solutions based in Stafford, TEXAS (USA)
Many times mining, oil and gas exploration, construction, and other activities take place in remote areas of the world. In these cases it is necessary to provide both potable water and treatment of sanitary wastes for the facility. In addition, many of these activities take place in temporary fashion as the sites will either be developed or abandoned at a future ...
ByWesTech Engineering, LLC based in Salt Lake City, UTAH (USA)
A tomato cannery needed additional treatment to remove suspended solids from their process wastewater. At Heron Innovators, we specialize in the design, development, fabrication, and installation of highly efficient SAF™ systems. A pilot trailer was placed at the plant and ran for two months during the 2012 processing season, proving the system’s capabilities and setting the stage for the customer’s order for a complete system to be ...
ByHeron Innovators, Inc. based in Rocklin, CALIFORNIA (USA)
Due to its flexibility the Mop Skimmer can be functional to nearly any application during a refining plant where the fluctuating liquids and water needs separation. Ambar is experienced with explosion proof systems specifically designed for the Petro Chemical waste water ...
ByAmbar Oil Skimmers based in Westwego, LOUISIANA (USA)
Groundwater Treatment: WesTech offers a wide variety of equipment for groundwater treatment for potable use. Whether your treatment objective is gas removal, nitrate removal, iron and manganese removal, color removal, softening, or even filtering a source under the direct influence of surface water, WesTech has your ...
ByWesTech Engineering, LLC based in Salt Lake City, UTAH (USA)
Coke Wastewater Treatment: Heating coal over 1100 Co in the absence of oxygen produces metallurgical coke. This process provides both heat and carbon (coke) required for iron production. During this process the volatile materials contained in the coal are driven off, leaving coke as the product. Gas produced by coking is withdrawn by means of blowers to recover energy-rich byproducts, including methane. Ammonia stills are the principal means of recovery. Recycled scrubber water is used as a coolant. Scrubber waste ...
ByWesTech Engineering, LLC based in Salt Lake City, UTAH (USA)
Cracking in a refinery is a process where the long organic chains in oil are broken to produce shorter chain organics that are more valuable than the oil. Fluid catalytic cracking (FCC) has generally replaced thermal cracking of petroleum hydrocarbon feed stocks. FCC produces more gasoline with a higher octane rating. FCC’s byproduct gases are more olefinic and valuable than those produced by thermal ...
ByWesTech Engineering, LLC based in Salt Lake City, UTAH (USA)
Countercurrent Decantation (CCD): Rock passes into a dump hopper and is then transferred to a vibrating grizzly screen. The oversized material is sent to a jaw crusher. The crushed product is combined with the grizzly undersize and the ore is conveyed to the coarse ore bin. ...
ByWesTech Engineering, LLC based in Salt Lake City, UTAH (USA)
Oil sands or, more technically, bituminous sands, are a type of unconventional petroleum deposit. Oil sands represent a vast wealth of energy reserves for the world rivaling traditional sources in quality, availability and the ability to meet the world's needs for many years into the future. The technologies for extraction of this resource are increasingly efficient, and WesTech has worked with several companies on the leading edge of these efforts and is a ready partner for new projects and plant ...
ByWesTech Engineering, LLC based in Salt Lake City, UTAH (USA)
Coal Preparation Circuit: Three quarters of American coal is mined east of the Mississippi River. Half of this is “prepared” coal. Coal preparation offers a number of commercial and environmental benefits. These include increased quality and commercial value of saleable coal by achieving 75-80% ash reduction and 15-80% trace element reduction. Cleaned coal reduces transportation costs as well as reduced quantities of combustion ash requiring disposal. Coal preparation can also make marginal coal ...
ByWesTech Engineering, LLC based in Salt Lake City, UTAH (USA)