- Home
- Applications
- make up water
Refine by
Make Up Water Product Applications
36 applications found
Recirculating Aquatic Systems recirculate the water only adding a small fraction of make-up water to cover up for evaporation and bleed off. In all RAS systems the water treatment is essential to not accumulating substances that have negative effects on the fish health, such as CO2, ammonia, and remainders of feed and ...
ByNP Innovation AB based in Malmö, SWEDEN
Premium
Increasing water scarcity, energy, water and disposal costs are pushing industrial end-users and utilities to explore wastewater reuse. ...
ByKovalus Separation Solutions, Inc. based in Wilmington, MASSACHUSETTS (USA)
Protect boiler feed make-up water from bacterial growth and associated biofouling; extend micron filter and RO membrane life; improve heat exchanger performance; and improve permeate quality and quantity with HOD UV for non-chemical disinfection and dechlorination. ...
ByAtlantium Technologies based in , ISRAEL
Chlorine Dioxide is ideal for disinfection of potable water storage tanks. These tanks are typically located in hospitals, commercial buildings, and other places where low pressure may exist or where loss of water cannot be tolerated. Bacteria-harboring biofilm is commonplace in these storage vessels, as the chlorine from the make-up water is insufficient to prevent its growth. New York has even legislated that storage tanks must ...
ByDripping Wet Water, Inc. based in San Antonio, TEXAS (USA)
Access to clean and safe water has primary importance for tourism in hotel and resorts industry. This can be for drinking water in remote island location, swimming pool make-up water and (golf) resorts irrigation water. ...
ByLenntech Water Treatment based in Delfgauw, NETHERLANDS
Problem: Large quantities of water are used for cooling in industrial manufacturing. To prevent scaling, corrosion and biofilm in the cooling system, inhibitors and biocides are regularity dosed. Make-up water is continuously added to the system to balance the loss of water from evaporation. As water is added, the concentration of chemicals is diluted and the quality of water ...
ByUviTec, part of ABB (Formerly Real Tech Inc.) based in Whitby, ONTARIO (CANADA)
Premium
Boilers and cooling towers share two major water related problems: deposits and corrosion. As steam is generated by a boiler or water evaporating from a cooling tower, dissolved minerals are left behind, increasing the concentration of these minerals. Additional minerals are introduced via the water added to makeup the water lost to steam/evaporation. Eventually, the minerals reach a level (or cycle) of concentration that will cause either loss of efficiency due to scale or damage from corrosion. This level can be ...
ByMyron L Company based in Carlsbad, CALIFORNIA (USA)
The process of electricity generation from fossil fuels such as coal, oil and natural gas is water-intensive. Between 40-50% of all water abstracted and used in developed countries is used in the generation of electricity. ...
ByIndustrie De Nora S.p.A. based in Milan, ITALY
Reverse Osmosis Polishers can concentrate BOD/COD from evaporator condensate and RO permeate streams to reduce waste water. Polished water can also be re-used in plant for boiler water make-up and CIP systems. In Dairy Industry applications, 'polishing' of these process water streams aids in the production of Class I water for re-use from dairy products as defined and regulated under Food & Drug ...
ByGEA based in Hudson, WISCONSIN (USA)
Premium
Innovative solutions to prevent corrosion, deposits and microbiology. An optimal heat transfer is the most important point in every water-cooled process. Scale, corrosion and biofouling negatively affect the heat transfer. Therefore Kurita develops customised solutions for cooling and process water systems, based on the combined treatments of scale & fouling prevention, corrosion inhibition, and ...
ByKurita Water Industries Ltd based in Tokyo, JAPAN
Premium
Today’s power industry is already subject to strict official regulations. These rules will only become more stringent in the future. As a result, environmentally friendly, cost-effective solutions that ensure plant and operational safety are in high ...
ByKurita Water Industries Ltd based in Tokyo, JAPAN
Intensive fish ponds and hatcheries are challenged to achieve high levels of water reuse, requiring unique and efficient treatment for ammonia, COD and solids separation.MBBR Biological treatment can offer tailor-made biological processes and clarification solutions allowing this industry to meet these challenges at a sustainable manner. ...
ByTong Xiang Small Boss Special Plastic Products Co., Ltd based in Zhe Jiang Province, CHINA
The pulp and paper market includes the manufacture of paper from a variety of woods and cellulosic material. The pulp mill also includes recovery, coating, and effluent treatment ...
ByNational Oilwell Varco (NOV) based in Houston, TEXAS (USA)
Why risk EPA fines and prison terms when you can convert the heavy metal ions in your plating rinse water stream into marketable metal oxides. The metal oxides are hydrophobic and dewater well. Metal oxides can be sold as raw components for new ...
ByPowell Water Systems, Inc. based in Centennial, OREGON (USA)
On-the-spot measurement for microbial risk management! Microbial growth in industrial chemicals can present a major problem.· If left unchecked, microbial contamination in raw materials and intermediate products can compromise manufacturing process performance and equipment integrity.· These same sources can also impact final product quality, which if not properly maintained can spoil products while sitting on the shelf.· The best solution is early, accurate detection and proactive ...
ByLuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA)
Water-steam circuits are at the heart of all thermal power plants that generate electricity from fossil or nuclear fuels. Here, the water and steam serve as an energy carrier and cooling ...
BySuzhou X Chemical Co.,Ltd based in Suzhou City, CHINA
Risk of corrosion limits you to recover more heat from flue gas. With polymer heat exchangers you can recover additional heat below the acid dew point without corrosion ...
ByHeatMatrix Group B.V. based in Nieuwerkerk aan den IJssel, NETHERLANDS
“Efficiently lowers algae, biofilm formation, bacterial counts and chemical consumption.” When temperatures are high, for example in cooling towers, a matrix of different microorganisms such as bacteria, fungi, EPS and algae can grow very rapidly. The disadvantages of biofilm formation in cooling towers can be enormous. Therefore water used in cooling towers needs frequent treatment and chemical shocks to keep levels of micro-organisms to a ...
ByLG Sonic B.V. based in Zoetermeer, NETHERLANDS
Since 1982 when ICI Ltd withdrew chlorine gas for use in swimming pools, sodium and calcium hypochlorite have been used by most municipal pools for the disinfection of the water and, since both of these disinfectants are alkaline, acid is used to reduce the pH to the optimum value for pool water. A few public pools still use chlorine gas or liquid bromine and many smaller pools such as school and hotel pools use trichloro-isocyanurates for disinfection. All of these disinfectants are acidic when dissolved in water ...
BypHlocrite based in Worcester Park, UNITED KINGDOM
Absolicon solar collector T160 concentrates the incoming light making heat up to 160 degrees and steam up to 8 bar for industrial processes such as bleaching, washing, drying, and pulp ...
ByAbsolicon Solar Collector AB based in Härnösand, SWEDEN