- Home
- Applications
- oil discharge
Refine by
Oil Discharge Product Applications
16 applications found
Techase developed a special treatment solution for oil tank slurry with the slurry shooting discharger and multi-plate screw thickener as its core equipment. This slurry shooting discharger is a new setting tank slurry discharging technology, applicable for the slurry with oil, water and big-sized solid particles. ...
ByShanghai Techase Environment Protection Co., Ltd based in , CHINA
In the chemical industry, oil is often discharged into wastewater during processes such as cooling or polymerization. This oil/water solution typically collects in common industry basins following completion of one of these processes or sumps when rainwater washes away oil that has leaked or ...
ByOil Skimmers, Inc. based in Cleveland, OHIO (USA)
This contaminated water flow collects in the bilge of the ship. Marine diesel, lubricating oils, grease, as well as other contaminants may be present in bilge water. The bilge water is discharged overboard, with oil and grease concentrations in the discharged water limited by national and international ...
ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in Edmonton, ALBERTA (CANADA)
Oil and grease in formation water includes free oil, dispersed oil (small oil droplets), and emulsified oil. Oil and grease discharge, along with produced water, involves compliance with stringent regulations. Oil and grease removal methods depend on the end usage of treated water and composition of oil in the produced water. ...
ByAdvanced Equipment and Services, Inc. based in Houston, TEXAS (USA)
Offshore installations, whether it’s a drilling rig, production platform or FPSO, have some of the most testing operating environments possible. Operators must combine the drive to efficiency with their environmental commitments. Whatever analyzer you choose should not only match your needs and add value but must not take up valuable resources whether that’s personnel or consumables. ...
ByAdvanced Sensors Ltd. - part of PAC L.P. based in Carrickfergus, UNITED KINGDOM
Ammonia, nitrates and organic waste (such as proteins, starches, carbohydrates, cellulose, urine, fats, oils and greases) discharged from municipal, industrial, and agricultural operations contaminate water in streams, lakes, and other water bodies used for recreational and commercial applications. ...
ByMetaMateria Technologies based in Columbus, OHIO (USA)
In addition to wastewater treatment, Triqua International also provides oil/water separation processes. These processes are usually executed with a plate separator system. Regulations are becoming more stringent which dictates, in order to remove also emulsified oil, the use of the UF membrane technique, ...
ByTriqua International BV based in Ede, NETHERLANDS
Oil companies might discharge produced water from their facilities to a local sea or inject it into a production or disposal formation, depending on local requirements. The discharged water quality at these facilities must be monitored for oil concentration to control process upsets and environmental issues. When oil field operators want to monitor the performance of their water treatment system, they have the choice to use the ...
ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in Edmonton, ALBERTA (CANADA)
Zero liquid discharge (ZLD) in Oil & Gas and Coal-to-chemical (CTX) industries. ...
ByMemsys Water Technologies GmbH based in Schwabmünchen, GERMANY
Discover advanced Regenerative Thermal Oxidizers (RTOs) designed specifically for the waterproof coil industry. Our RTO systems provide efficient VOC abatement, ensuring compliance with environmental regulations and enhancing air quality. Explore our solutions for reliable and cost-effective pollution control ...
ByEver-Power Pte. Ltd. based in Singapore, SINGAPORE
A combination of factors in recent years has led to increased attention to water management in the oil and gas industry. Some of these factors include: limited water resources in certain areas, development of water-intensive technologies to better exploit unconventional plays, excessive transportation/disposal costs for water, a changing regulatory environment and a public push for sustainability and conservation relating to water as a ...
ByPentair Filtration Solutions, LLC based in Conroe, TEXAS (USA)
Algae’s biomass, once refined, can be used for animal feed and its lipid oil for blended petroleum based ...
ByRoyall Dissolved Air Floatation Corporation (DAF) Products, LLC based in Reedsburg, WISCONSIN (USA)
Power plants, paper and steel mills and other industries with rotating equipment often use recirculated water for the cooling of lubricating, hydraulic, turbine and transformer oil. If an oil cooler leaks, the loss of oil can cause significant damage to the pumps, compressors and motors. High oil & grease water discharge test results can be caused by oil contamination. In some cases, air quality issues can ...
ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in Edmonton, ALBERTA (CANADA)
Drilling mud is usually pumped down the hollow drill pipe to the drill bit where it exits the pipe and is then flushed back up the brehole to the surface. Some muds are then discharged into the environment (via regulated methods), and others are recirculated back into the process for reuse. Pulsar Measurement provide flow solutions to ensure that drilling muds are flowing through pipes at the correct rate, giving an indication of blockages or issues within the process and aids oil ...
ByPulsar Measurement based in Birmingham, UNITED KINGDOM
Marine bilge water and ballast water discharges, and disposal of tank wash slops containing oil, can cause serious environmental damages. Most international, federal and state agencies set limits on the amount of oil and grease content allowed in discharges. Many places, especially coastal harbors, are even designated as a NO DISCHARGE ...
ByDraygon based in Venice, FLORIDA (USA)
Industrial processes, oil spills, and stormwater runoffs are some of the contributors to oil pollution. Some manufacturing processes require oil/grease recovery and at the same time, oil & grease should not exceed acceptable limits in wastewater/effluent at discharge. Wastewater treatment involves Oil and grease removal and, FOG ...
ByPotential Engineering based in Navi Mumba, INDIA