- Home
- Applications
- pollution control system
Refine by
Industries served
- Manufacturing, Other
- Metal
- Pulp & Paper
- Air and Climate
- Energy
- Chemical & Pharmaceuticals
- Automobile & Ground Transport
- Paint
- Agriculture
- Plastics & Resins
- Oil, Gas & Refineries
- Construction & Construction Materials
- Electronics and Computers
- Forestry & Wood
- Waste and Recycling
- Mining
- Aerospace & Air Transport
- Food and Beverage
- Glassware
- Printing
- Textile
- Water and Wastewater
- Environmental
Pollution Control System Product Applications
158 applications found
Regulations around the globe are becoming more and more stringent for particulate emissions. Macrotek offers some of the most efficient wet and dry technologies to meet the latest EPA, EU, and MOE standards. Often, particulate collection is combined with acid gas removal. Our most advanced wet-dry system meets and exceeds the most stringent regulations for both hazardous gases and ...
ByMacrotek Inc. based in Markham, ONTARIO (CANADA)
Spray booths in automotive, golf ball, and parts applications generally require particle control from over-spray as well as VOC control. Wet scrubbers are effective in controlling the droplets and protecting the down-stream thermal oxidizers from fouling with the non-combustible inorganic ...
ByCR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA)
In the production of metals from ore or recycled products there are many processes where pollutants form. Smelters require high amount of energy and depending on the source of this energy and where production takes place, energy consumption can also contribute to the amount of pollution in your flue gas. In processes for metals, the metal should be purified from unwanted materials. It is inevitable that these materials as well as small amounts of the metals end up in the flue gas. Our technology is unique in its ...
ByEnvibat Systems AB based in Skellefteå, SWEDEN
Ammoniated compounds, fluoride gases and organic acids created as submicron fumes require scrubbers for effective ...
ByCR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA)
The pharmaceutical industry worldwide is facing a major challenge. The productions of desired chemicals leaves an amount of by-products, some of them dangerous to both humans and the environment. An incinerator is usually used to deal with the challenge to reduce the volumes of hazardous substances. This process, however, creates sub-micron particles that conventional filter technology cannot handle. By using EnviBAT’s technology for gas cleaning – the best in the industry – such issues can be ...
ByEnvibat Systems AB based in Skellefteå, SWEDEN
Control of emissions is often required due to the hazardous nature of the contaminant. Often, control or removal is necessary due to offensive odours. Ammonia, sulfur and other related compounds fall in these categories. Macrotek offers many control technologies to capture ammonia and other odour causing contaminants. Reagents are often used to neutralize and stabilize the ...
ByMacrotek Inc. based in Markham, ONTARIO (CANADA)
The chemical process industry has been the Clean Air Group, LLC primary market since the Company’s inception in 1917. Our experience with a multitude of chemicals and processes is the foundation of the Clean Air Group, LLC expertise in wet scrubbing. Clean Air Group, LLC broad experience runs from the treatment or relatively simple acid gases to exotic and severely toxic substances including NaCN, HCN, Phosgene and ...
ByCR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA)
Premium
Problem Various manufacturing industries fall in the category of highly polluting industries. Often, the manufacturing processes are responsible for pollutants like Dust, Gases, Noise eventually damaging the work environment. Additionally, such pollutants have an impact on production quality. Managing a workable environment for the personnel is mandatory compliance for industries. Also, Limiting the environmental impact in the surrounding areas is a regulatory need for the industries. Lack of ...
ByOizom Instruments Pvt. Ltd. based in Ahmedabad, INDIA
Sulfur plants, acid plats etc. Chemical industry is important to our modern society, but they also produce large quantities of chemical byproducts. These byproducts can be dangerous, and if they cannot be used for other processes, they are often incinerated, causing large amounts of hazardous substances which end up in the flue ...
ByEnvibat Systems AB based in Skellefteå, SWEDEN
Waste incineration is a complex area. The mix of waste, moisture content, temperature of the waste, surrounding air and a variety of other factors interact and affect which residues are formed. Combustion entails often a gas consisting of heavy metals, sulfur oxides, chlorides, dioxins, etc. It is extremely important with a proper handling of the gas and the task often requires a mixture of wet and semi-dry treatment. EnviBAT offers equipment that brings particle levels down to extremely low levels, which ...
ByEnvibat Systems AB based in Skellefteå, SWEDEN
Emissions produced in the steel industries are wide-ranging. These can include coke oven gas clean-up, acid gas removal, and furnace emission ...
ByCR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA)
Grain handling and/or processing operations have the potential to release particulate that can be effectively removed with venturi scrubbers. Fermentation of corn to generate ethanol also releases fugitive emissions that can be scrubbed with counter-current packed ...
ByCR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA)
At Pollution Control Products, our burn off ovens are used for the safe removal of polymer buildup from expensive dies, molds, extrusion screws, breaker plates and other metal parts, eliminating the need for abrasives, toxic chemicals and their health and environmental risks. Below is a common application scenario for our ...
ByPollution Control Products Co. based in Dallas, TEXAS (USA)
Applied Catalysts has a unique activated carbon monolith based catalyst (ACMC, link to Flyer) based on Applied Ceramic carbon honeycomb (ACM). The ACM has been commercialized in a number of gas adsorption applications, such as for evaporative emission control in automobiles. The ACMC catalysts can be used in most applications where catalysts are carbon supported with advantages for continuous process chemistries in flow ...
ByApplied Catalysts based in Doraville, GEORGIA (US) (USA)
In the forest industry, it becomes increasingly important to improve energy efficiency. EnviBAT specializes in gas/gas heat exchange where heat is recovered from the outgoing gas streams, and mist gas condenser, where large amounts of heat can be recovered from the sulphate pulp ...
ByEnvibat Systems AB based in Skellefteå, SWEDEN
Venturi scrubbers and absorbers remove the particulate, tars, and sulfur compounds generated from the gasification process to create an optimized and clean-burning syngas. The cleaner the syngas, the richer the fuel content for increased energy ...
ByAirPol based in Pittsburgh, PENNSYLVANIA (USA)
Hydrocarbon storage tanks hold liquids like petrol. diesel, aviation fuel, etc. The type and size of the tanks vary as per application. These tanks deploy a floating suction system to retrieve liquids from just below the surface to eliminate any type of pollutants from entering the withdrawal ...
ByPotential Engineering based in Navi Mumba, INDIA
The Clean Air Group, LLC has provided multi-stage scrubbing packages to most of the top multinational pharmaceutical companies for both production process and pilot pharmaceutical process off-gases. These specialized systems are design to accommodate wide variations in operating conditions and many different pollutants. The Clean Air Group, LLC has provided venturi scrubbers for particulate removal and packed towers for water-soluble VOC removal from tablet making ...
ByCR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA)
Odor control via the use of oxidizing reagents can be effectively accomplished using the Clean Air Group, LLC counter-current packed towers. Whether it is H2S, NH3, both or other odorous compounds we have the scrubber technology or absorber technology to satisfy treatment ...
ByCR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA)
The Clean Air Group, LLC has provided many scrubbers (venturi type, ejector type, packed towers) for the chemical plant area of refineries. These have treated pollutants such as elemental sulfur, maleic anhydride, pthalic anhydride, ethylene oxide, hydrogen sulfide, etc. Our venturi scrubbers can be effectively utilized to handle the off-gases from FCCUs. Other specialized applications (for instance using Stretford Solution in an Ejector scrubber for high efficiency H2S removal) are not unusual for Clean Air ...
ByCR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA)